Angelo Decor Caprice Fountain Operating instructions

Type
Operating instructions
Thank you for buying an Angelo Decor Fountain!
We ho
p
e
y
ou will find these instructions hel
p
ful in settin
g
u
p
y
our fountain. If
y
ou need mor
e
information to
p
ro
p
erl
y
care for
y
our fountain,
p
lease DO NOT return the unit to
p
lace of
p
urchase.
Please visit our web site, www.an
g
elodecor.com, for assistance and warrant
y
information.
First un
p
ack carton carefull
y
, arran
g
in
g
p
arts safel
y
in
y
our workin
g
area
.
Pump and cord seal are pre- Electrical cord through base. Twist and lock bowl into Connect tubing to pump.
installed. Ensure seal is secure. place.
Tubing through riser. Twist and lock riser into Run tubing through second bowl, then Tubing though top
place. twist and lock into place. riser.
Slide top riser into Connect tubing to top. Slide top piece firmly into place. Install pump access
place. door.
This fountain comes complete with our innovative
splash reduction system. If splash is a concern,
simply drape the splash line over each spill
point to dramatically reduce splash.
Final assembly
should loo
k
Now sim
p
l
y
fill with clean water and
p
lu
g
into a
g
rounded GFCI outle
t
like this
We recommend kee
p
in
g
bowl 3/4 full of water to avoid
p
um
p
burnout.
Your fountain will work better, and last longer, when kept clean using a soft cloth and mild soap on a regular basis.
This item should be stored properly for harsh winters, as water left to freeze in the bowl may cause cracking, which
is not covered by warranty. May we suggest you disassemble the unit for the winter months,
removing pump and all water, and store in the garage or shed for best results.
  • Page 1 1

Angelo Decor Caprice Fountain Operating instructions

Type
Operating instructions

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI