Andersen 9069184 Wood Jamb Block or Interior Jamb Cover Replacement Service Instructions

Andersen
Brand
Andersen
Model
9069184 Wood Jamb Block or Interior Jamb Cover Replacement
Type
Service Instructions
Use caution when working at elevated heights and around unit openings.
Follow manufacturers’ instructions for ladders and/or scaffolding. Failure
to do so may result in injury or death.
Sea cauteloso al trabajar en lugares elevados y cerca de las aberturas de
la unidad. Siga las instrucciones del fabricante para el uso de escaleras
y/o andamios. Si no lo hiciera, podrían producirse lesiones o la muerte.
Follow manufacturers’ instructions for hand or power tools. Always
wear safety glasses. Failure to do so may result in injury and/or
product damage.
Siga las instrucciones del fabricante para el uso de herramientas
eléctricas o manuales. Utilice siempre gafas de seguridad. Si no lo
hiciera, podrían producirse lesiones y/o daños al producto.
9069184 BA Revised 6/03/13
Wood Jamb Block or Interior Jamb Cover Replacement
for E-Series Gliding Windows
Thank you for choosing Andersen.
For questions call 1-888-888-7020. For more information and/or guides visit www.eaglewindow.com
Please leave this guide with building owner.
Si tiene alguna pregunta llame al 1-888-888-7020. Para obtener más información y/o guías, visite www.eaglewindow.com
Deje esta guía con el dueño de la construcción.
▶Read guide from beginning to end before starting installation. Read all warnings and cautions during unit installation.
▶For information, calculating, and design pressure ratings for E-Series windows and doors go to
www.eaglewindow.com/Wintelligence/Design-Pressure-Estimator.aspx
Lea completamente la guía antes de comenzar la instalación. Lea y respete todas las advertencias y precauciones durante la instalación de la unidad.
▶Check with your local building code ofcial to identify and conrm compliance with local building code requirements.
Consulte los códigos locales de construcción para identicar y conrmar que se cumplan los requisitos del código de construcción.
Tools Needed Herramientas necesarias
∙Safety Glasses Lentes de seguridad
∙Needle Nose Pliers Pliers
∙Hook Tool Hook Tool
∙Side Cutting Pliers Side Cutting Pliers
∙Finish Nailer Finish Nailer
Supplies Needed Herramientas necesarias
∙Finish NailsFinish Nailer
Parts Included Partes incluidas
(1) Wood Jamb Block or Interior Jamb Cover
Wood Jamb Block
Interior Jamb Cover
Standard gliding window shown in guide.
Standard gliding window shown in guide.
▶For wood jamb block replacement, proceed to page 2.
▶For interior jamb cover replacement, proceed to page 3.
“Andersen” and all other marks where denoted are trademarks of Andersen Corporation and its subsidiary. ©2013 Andersen Corporation. All rights reserved.
2
9069184
Remove wood jamb block with a hook tool and dispose of properly. Wood jamb block is blind nailed from the back side.
Position new wood jamb block and fasten
with nish nails.
3
Interior
Nailer
Wood Jamb
Block
Head Jamb
▶Wood Jamb Block replacement
procedure is complete.
1
Interior
Wood Jamb Block Replacement
Cut off exposed nails and remove debris.
2
Interior
Hook Tool
Side Cutting
Pliers
Exposed
Nails
Fixed Sash Side
Wood Jamb Block
3
9069184
Unlock and open active sash to midpoint of window.
Unlock and open active sash to midpoint of window.
Remove frame weatherstrip from jamb kerf with pliers and save for
reuse.
Remove interior jamb cover with a hook tool
and dispose of properly. Interior jamb cover is
blind nailed from the back side.
Cut off exposed nails and remove debris. Position new interior jamb cover and fasten
with nish nails.
Insert frame weatherstrip into jamb kerf at head jamb liner and work
downward to sill. Press rmly to fully seat weatherstrip.
1
Interior
2
Interior
3
Interior
4
Interior
5
Interior
6
Interior
Active Sash
Active Sash Sill
Jamb Kerf
Jamb Kerf
Jamb Kerf
Frame
Weatherstrip
Interior
Jamb
Cover
Side
Hook
Tool
Hook
Tool
Frame
Weatherstrip
Frame
Weatherstrip
Interior Jamb
Cover
Head Jamb
Liner
Head Jamb
Liner
Needle
Nose
Pliers
Side Cutting
Pliers
Side Cutting
Pliers Nailer
Nailer
Exposed
Nails
Exposed
Nails
▶Interior jamb cover replacement procedure is complete.
Interior Jamb Cover Replacement
Interior
Jamb
Cover
Close sash and lock window.
Close sash and lock window.
7
Interior
Active Sash
Active Sash
Lock
  • Page 1 1
  • Page 2 2
  • Page 3 3

Andersen 9069184 Wood Jamb Block or Interior Jamb Cover Replacement Service Instructions

Andersen
Brand
Andersen
Model
9069184 Wood Jamb Block or Interior Jamb Cover Replacement
Type
Service Instructions
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents