Andersen E-Series Casement Windows Service Instructions

Type
Service Instructions
Weatherstrip
Tools Needed
Safety glasses
Snips
Parts Included
(1) Weatherstrip
Use caution when working at elevated heights and around unit openings. Follow
manufacturers’ instructions for ladders and/or scaffolding. Failure to do so may
result in injury or death.
Follow manufacturers’ instructions for hand or power tools.
Always wear safety glasses. Failure to do so may result in injury
and/or product damage.
9069248 BA Revised 09/26/13
Sash Weatherstrip Replacement
for E-Series Casement Windows with Piano Hinge
For questions call 1-888-888-7020. For more information and/or guides visit www.eaglewindow.com.
Please leave this guide with building owner.
Read guide from beginning to end before starting installation. Read all warnings and cautions during unit installation.
Andersen” and all other marks where denoted are trademarks of Andersen Corporation and its subsidiary. ©2013 Andersen Corporation. All rights reserved.
Thank you for choosing Andersen.
Check with your local building code ofcial to identify and conrm compliance with local building code requirements.
2
9069248
1
Interior
3
Interior
2
Open sash. Remove head and lock side weatherstrip.
Insert new weatherstrip n into weatherstrip kerf.
Cut new weatherstrip to length using old weatherstrip as a template. Cut 5/16" of
weatherstrip n from each end, as shown. Dispose of old weatherstrip properly.
Head
Weatherstrip
Lock Side
Weatherstrip
Sash weatherstrip replacement procedure is completed.
Old Weatherstrip
New Weatherstrip
Snips
5/16"
Weatherstrip
Fin
No
weatherstrip
is applied
to bottom or
hinge side of
sash.
No
weatherstrip
is removed
from bottom
or hinge side
of sash.
Weatherstrip
Kerf
Weatherstrip Fin
  • Page 1 1
  • Page 2 2

Andersen E-Series Casement Windows Service Instructions

Type
Service Instructions

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI