Andersen Lock Handle Replacement Service Instructions

Andersen
Brand
Andersen
Model
Lock Handle Replacement
Type
Service Instructions

Andersen Lock Handle Replacement is a replacement lock handle for E-Series/Eagle® French Casement Windows. It is easy to install and can be completed in just a few steps. The lock handle comes with all the necessary parts and tools, including a 5/32" Allen wrench.

The Andersen Lock Handle Replacement is a durable and long-lasting product. It is made of high-quality materials and is designed to withstand the elements. The lock handle is also easy to clean and maintain.

Andersen Lock Handle Replacement is a replacement lock handle for E-Series/Eagle® French Casement Windows. It is easy to install and can be completed in just a few steps. The lock handle comes with all the necessary parts and tools, including a 5/32" Allen wrench.

The Andersen Lock Handle Replacement is a durable and long-lasting product. It is made of high-quality materials and is designed to withstand the elements. The lock handle is also easy to clean and maintain.

9069223 BA Revised 06/20/13
Tools Needed Herramientas necesarias
∙Safety Glasses Lentes de seguridad
∙5/32" Allen Wrench 5/32" Allen Wrench
Lock Handle Replacement
Lock Handle Replacement
for E-Series French Casement Windows
for E-Series/Eagle® French Casement Windows
Parts Included Partes incluidas
(1) Lock Handle Lock Handle
Lock Handle
Thank you for choosing Andersen.
For questions call 1-888-888-7020. For more information and/or guides visit www.eaglewindow.com.
Please leave this guide with building owner.
Si tiene alguna pregunta llame al 1-888-888-7020. Para obtener más información y/o guías, visite www.eaglewindow.com
Deje esta guía con el dueño de la construcción.
▶Read guide from beginning to end before starting installation. Read all warnings and cautions during unit installation.
Lea completamente la guía antes de comenzar la instalación. Lea y respete todas las advertencias y precauciones durante la instalación de la unidad.
▶Check with your local building code ofcial to identify and conrm compliance with local building code requirements.
Consulte los códigos locales de construcción para identicar y conrmar que se cumplan los requisitos del código de construcción.
Use caution when working at elevated heights and around unit openings.
Follow manufacturers’ instructions for ladders and/or scaffolding. Failure
to do so may result in injury or death.
Sea cauteloso al trabajar en lugares elevados y cerca de las aberturas de
la unidad. Siga las instrucciones del fabricante para el uso de escaleras
y/o andamios. Si no lo hiciera, podrían producirse lesiones o la muerte.
Follow manufacturers’ instructions for hand or power tools. Always
wear safety glasses. Failure to do so may result in injury and/or
product damage.
Siga las instrucciones del fabricante para el uso de herramientas
eléctricas o manuales. Utilice siempre gafas de seguridad. Si no lo
hiciera, podrían producirse lesiones y/o daños al producto.
“Andersen” and all other marks where denoted are trademarks of Andersen Corporation and its subsidiary. ©2013 Andersen Corporation. All rights reserved.
5
Exterior
Unlock and open active sash.
Unlock and open active sash.
2
9069223
Using a 5/32 allen wrench, remove screws on the back side of the sill
cover and save for reuse.
Pull lock handle through the face of sill cover and properly dispose.
Pull lock handle through the face of sill cover and properly dispose.
Insert new lock handle into sill cover in same position.
Insert new lock handle into sill cover in same position and secure using
saved screws.
▶Lock handle replacement is complete.
Lock handle replacement is completed.
Close and lock sash.
Close and lock sash.
Active Sash
Active Sash
Secure new lock handle using saved screws.
Insert new lock handle into sill cover in same position and secure us-
ing saved screws.
2
Exterior
1
Interior
4
Interior
6
Interior
3
Interior
Sill Cover
Lock Handle
5/32" Allen
Wrench
Sill Cover
Screws
5/32" Allen
Wrench
Sill Cover
Screws
  • Page 1 1
  • Page 2 2

Andersen Lock Handle Replacement Service Instructions

Andersen
Brand
Andersen
Model
Lock Handle Replacement
Type
Service Instructions

Andersen Lock Handle Replacement is a replacement lock handle for E-Series/Eagle® French Casement Windows. It is easy to install and can be completed in just a few steps. The lock handle comes with all the necessary parts and tools, including a 5/32" Allen wrench.

The Andersen Lock Handle Replacement is a durable and long-lasting product. It is made of high-quality materials and is designed to withstand the elements. The lock handle is also easy to clean and maintain.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers