Andersen 9069161 Top Sash Tilt Latch Replacement Service Instructions

Type
Service Instructions

Andersen 9069161 Top Sash Tilt Latch Replacement is a replacement part for E-Series double-hung windows. It's designed to keep the top sash in place when tilted in for cleaning or ventilation. The latch is easy to install and comes with all the necessary hardware. Once installed, it will provide a secure and convenient way to keep your windows open safely.

Andersen 9069161 Top Sash Tilt Latch Replacement is a replacement part for E-Series double-hung windows. It's designed to keep the top sash in place when tilted in for cleaning or ventilation. The latch is easy to install and comes with all the necessary hardware. Once installed, it will provide a secure and convenient way to keep your windows open safely.

Andersen” and all other marks where denoted are trademarks of Andersen Corporation and its subsidiary ©2013 Andersen Corporation. All rights reserved. 9069161 BA Revised 06/03/13
Top Sash Tilt Latch Replacement
for E-Series Double-Hung Windows
Thank you for choosing Andersen.
For questions call 1-888-888-7020. For more information and/or guides visit www.eaglewindow.com
Please leave this guide with building owner.
Use caution when working at elevated heights and around unit openings.
Follow manufacturers’ instructions for ladders and/or scaffolding. Failure
to do so may result in injury or death.
Follow manufacturers’ instructions for hand or power tools. Always
wear safety glasses. Failure to do so may result in injury and/or
product damage.
Read guide from beginning to end before starting maintenance procedure. Read all warnings and cautions during unit maintenance.
Parts Included
(1) Top Sash Tilt Latch
For information, calculating, and design pressure ratings for E-Series windows and doors go to
www.eaglewindow.com/Wintelligence/Design-Pressure-Estimator.aspx
Check with your local building code ofcial to identify and conrm compliance with local building code requirements.
Tools Needed
Safety Glasses
#2 Phillips Screwdriver
Top Sash Tilt Latch
Right Hand (as viewed from interior)
Left Hand (as viewed from interior)
Right hand tilt latch replacement shown in guide.
2
9069161
1
Interior
Retract top sash tilt latch and hold, exposing screw. Remove screw
with a #2 Phillips screwdriver and save for reuse.
Position new tilt latch on top sash. Retract tilt latch and fasten with
saved screw.
#2 Phillips
Screwdriver
#2 Phillips
Screwdriver
Top Sash
Tilt Latch
Tilt Latch
Remove existing tilt latch and dispose of properly.
Operate tilt latch to verify smooth operation.
Tilt Latch
Close and lock sash.
Lock Handles
Top sash tilt latch replacement procedure is complete.
Unlock window and lower top sash.
6
Interior
4
Interior
2
Interior
3
Interior
5
Interior
  • Page 1 1
  • Page 2 2

Andersen 9069161 Top Sash Tilt Latch Replacement Service Instructions

Type
Service Instructions

Andersen 9069161 Top Sash Tilt Latch Replacement is a replacement part for E-Series double-hung windows. It's designed to keep the top sash in place when tilted in for cleaning or ventilation. The latch is easy to install and comes with all the necessary hardware. Once installed, it will provide a secure and convenient way to keep your windows open safely.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI