ZPE HUB-UO1 7-Port USB Hub (USB) Installation guide

HUB-UO1 7-Port USB Hub (USB)
Brand
ZPE
Model
HUB-UO1 7-Port USB Hub (USB)
Type
Installation guide

This manual is also suitable for

ZPESYSTEMS.COM
7-Port USB Hub (USB)
ZPE-HUB-UO1
COMPATIBLE WITH
ALL NODEGRID DEVICES
Quick Install Guide
HARDWARE
Data Transfer Speed 5Gbps
Added Features Built-in advanced chip to avoid
over current, over voltage, short circuit,
and high temperature. Plug and Play.
Cable Attached. 1 meter (3.3 feet)
DESCRIPTION
Connect more sensors and USB devices to your Nodegrid appliances using
this 7-Port USB 3.0 Hub. Cover all possible environmental setbacks by
connecting up to seven additional Nodegrid sensors.
Product Specifications ZPE-HUB-U01
All rights reserved. September 8, 2022
ASSEMBLED IN THE USA
ZPESYSTEMS.COM +1.844.4ZPESYS
Quick Install Guide ZPE-HUB-U01
Connect USB Hub to any available USB 2.0 or USB 3.0 port on Nodegrid Serial Consoles and Services Routers.
7-Port USB Hub Cable: 1 meter Any USB Port on a Nodegrid Device
SERIAL 1SFP 0
LNK/ACT SPD
CONSOLE
USB
USB
VGA
Plug & Play. Done.
We discourage plugging hub-on-hub as it may aect power and performance.
Please always make sure to plug it on any available Nodegrid hardware USB port.
Inset: Nodegrid Link SR
All rights reserved. September 8, 2022
We suggest placing
this product here
*Rack cage may be a
different model or size
USB3.0-SuperSpeed
7Ports Hub
USB1
USB7
USB6
USB4
USB3
USB5
USB2
  • Page 1 1
  • Page 2 2

ZPE HUB-UO1 7-Port USB Hub (USB) Installation guide

HUB-UO1 7-Port USB Hub (USB)
Brand
ZPE
Model
HUB-UO1 7-Port USB Hub (USB)
Type
Installation guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents