Focal Point Seem 1 Direct/Indirect Wall Mount FSM1BW Installation guide

Focal Point
Brand
Focal Point
Model
Seem 1 Direct/Indirect Wall Mount FSM1BW
Type
Installation guide

This manual is also suitable for

Focal Point Seem 1 Direct/Indirect Wall Mount FSM1BW is a versatile lighting solution designed to provide both direct and indirect illumination. With its sleek design and adjustable features, the FSM1BW can be customized to suit various applications.

Key features include:

  • Adjustable direct/indirect light distribution: The FSM1BW allows you to control the ratio of direct to indirect light, enabling you to create the desired ambiance and meet specific lighting requirements.

  • Wall-mounted design: The FSM1BW can be easily mounted on walls, making it suitable for a wide range of spaces, including offices, hallways, and retail environments.

Focal Point Seem 1 Direct/Indirect Wall Mount FSM1BW is a versatile lighting solution designed to provide both direct and indirect illumination. With its sleek design and adjustable features, the FSM1BW can be customized to suit various applications.

Key features include:

  • Adjustable direct/indirect light distribution: The FSM1BW allows you to control the ratio of direct to indirect light, enabling you to create the desired ambiance and meet specific lighting requirements.

  • Wall-mounted design: The FSM1BW can be easily mounted on walls, making it suitable for a wide range of spaces, including offices, hallways, and retail environments.

IS0680 Rev. F 2022 ©Focal Point, LLC 4141 S. Pulaski Rd., Chicago, IL 60632 | www.focalpointlights.com 1 of 2
Seem™ 1 wall mount
FSM1W | FSM1BW
focal point
U -
individUal
S -
Start of rUn
i -
intermediate
e -
end of rUn
individUal / Start of rUn
Luminaires must be installed by a qualied electrician (check with local and national codes for proper installation).
To prevent electrical shock, disconnect electrical supply before installation or servicing.
configUrationS are rUn Specific, pleaSe conSUlt factory drawingS before beginning inStallation.
Shipped in hardware bag
partS liStS
intermediate / end of rUn
2
(FASTENERS BY OTHERS)
moUnting Screw
(72007)
(2 per lUminaire)
Shipped inStalled
joiner
bracket
(a37351-01)
(700192)
1LOCATE J-BOX CENTER & INSTALL (J-BOX BY OTHERS. 4"x2" handy box.)
2' - 2'11" housing 3' - 3'11" & 6' - 6'11" housings
12.06" 18.06"
luminaire outlineluminaire outline
2.00"
3.50"
3.50"
2.00"
4' - 4'11", 7' - 7'11" & 8' housings 5' - 5'11" housing
luminaire outline
luminaire outline
24.06" 30.06"
2.00"
2.00"
3.50"
3.50"
23 INSTALL REMAINING RAILS.
REMOVE END SECTION FROM
LAST RAIL IN RUN.
(FASTENERS BY OTHERS)
key
power off
power on
attention
See additional
inStrUctionS
individUal inSallationS follow StepS 1-6, 10 & 11
prodUct id
label on
reflector
Contractor is responsible for adequately reinforcing walls and/or ceilings to support luminaire weight. Focal Point, LLC accepts no responsibility for inadequately reinforced walls
and/or ceilings. The information contained in this drawing is the sole property of Focal Point, LLC. Any reproduction in part or whole without the written permission of Focal Point, LLC
is prohibited.
IS0680 Rev. F 2022 ©Focal Point, LLC 4141 S. Pulaski Rd., Chicago, IL 60632 | www.focalpointlights.com 2 of 2
7
6
make electrical connections
4
AVOID ALL CONTACT WITH LED SURFACE,
LEDS ARE EASILY DAMAGED!
5REMOVE REFLECTORS ON
FEED LUMINAIRE ONLY
make electrical connections
10 11
8
AVOID ALL CONTACT WITH
LED SURFACE, LEDS ARE
EASILY DAMAGED!
driver Service
111
AVOID ALL CONTACT WITH LED SURFACE,
LEDS ARE EASILY DAMAGED!
2
WIRE NUTS BY OTHERS
ASYMMETRIC LENS DISTRIBUTION DIRECTION
make electrical connections
X2 PER HOUSING
9X2 PER HOUSING
  • Page 1 1
  • Page 2 2

Focal Point Seem 1 Direct/Indirect Wall Mount FSM1BW Installation guide

Focal Point
Brand
Focal Point
Model
Seem 1 Direct/Indirect Wall Mount FSM1BW
Type
Installation guide
This manual is also suitable for

Focal Point Seem 1 Direct/Indirect Wall Mount FSM1BW is a versatile lighting solution designed to provide both direct and indirect illumination. With its sleek design and adjustable features, the FSM1BW can be customized to suit various applications.

Key features include:

  • Adjustable direct/indirect light distribution: The FSM1BW allows you to control the ratio of direct to indirect light, enabling you to create the desired ambiance and meet specific lighting requirements.

  • Wall-mounted design: The FSM1BW can be easily mounted on walls, making it suitable for a wide range of spaces, including offices, hallways, and retail environments.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers