2. Breezesta
  3. Horizon Coffee Table

Breezesta Horizon Coffee Table Assembly Instructions

  • Hello! I've reviewed the instructions for the BREEZESTA Horizon HZ-0310 Coffee Table. This document provides a step-by-step guide on how to assemble the table, detailing the necessary parts and hardware. I understand that it involves three key assembly steps and utilizes different types of screws. I am ready to answer any questions you may have about the device or assembly process.
  • What is the first step in assembling the table?
    How are the Side Assemblies attached to the Rail Assembly?
    What type of screws are used to secure the slats?
Attached Side Assemblies to Rail Assembly using screws (B)
as shown.
Place Seat Supports in place and using screws (A), attach the Rails as shown in the drawing
Fit seat slats into bench as shown. From the bottom side use uncolored screws (C) to secure
slats. Use screws (A) to attach Side Assemblies to Slats.
AFO
Ver 13.0
B-2.5"colored
A-1.5"colored
C-2"uncolored
A (from behind)
FRONT RAIL
STEP 1 A
SEAT SUPPORTS
36" BENCH (1)
48" BENCH (2)
60" BENCH (3)
STEP 2
RIGHT SIDE ASSEMBLY
B
LEFT SIDE ASSEMBLY
B's
B
STEP 3
Place one end into
slot and bend slat
slightly to fit into
other end.
A
C's
(uncolored)
BREEZESTA tm
Recycled Poly Furniture
HORIZON COFFEE TABLE
LIST OF PARTS
Rails (2)
End Assembies (2)
Seat Slats (5)
Seat Supports (see chart)
Hardware (see chart)
Insert Bit Tool (1)
Seat Supports
Bench Size
Screw "A"
Screw "B"
Screw "C"
60"
8
15
36"48"
1 2 3
10
8
8 10 12
8
5
/