Diebold Nixdorf CS 2550 is a highly versatile and functional device that offers a wide range of capabilities to meet your specific business needs. With its advanced features and user-friendly design, the CS 2550 is an ideal choice for businesses of all sizes.
Here are just a few of the things you can do with the Diebold Nixdorf CS 2550:
- Process cash transactions quickly and efficiently
- Manage your inventory and track sales
- Provide exceptional customer service
- Reduce costs and improve profitability
The CS 2550 is also highly configurable, so you can tailor it to meet the specific needs of your business. With its modular design, you can add or remove components as needed, ensuring that you always have the right tools for the job.
Diebold Nixdorf CS 2550 is a highly versatile and functional device that offers a wide range of capabilities to meet your specific business needs. With its advanced features and user-friendly design, the CS 2550 is an ideal choice for businesses of all sizes.
Here are just a few of the things you can do with the Diebold Nixdorf CS 2550:
- Process cash transactions quickly and efficiently
- Manage your inventory and track sales
- Provide exceptional customer service
- Reduce costs and improve profitability
The CS 2550 is also highly configurable, so you can tailor it to meet the specific needs of your business. With its modular design, you can add or remove components as needed, ensuring that you always have the right tools for the job.
Installation guide & operating manual
CINEO C4080 / CINEO C2060 /
CINEO C2070 / CINEO C2550 /
CINEO C2560
Supplementation
Self-Service
Systems
Questions and suggestions
- Installation guide & operating manual 01750227005 B
Do you have ...
... any questions or suggestions
regarding this manual?
Please contact the following address
giving the order number of this manual
in your message:
Address:
WINCOR NIXDORF International GmbH
Handbuchredaktion R&D ACT 12
D - 33094 Paderborn
Germany
Fax: +49 (0) 52 51 693-62 09
E-mail: [email protected]
... any technical questions or problems?
Please conctact your local representative.
September Edition 2014
CINEO C4080 / CINEO C2060 / CINEO C2070 /
CINEO C2550 / CINEO C2560
Supplementation
Installation guide & operating manual
Copyright © Information and trademarks
- Installation guide & operating manual 01750227005 B
© WINCOR NIXDORF International GmbH 2014
All rights, including rights of translation
and rights of reproduction by reprinting,
copying or similar methods, even of
parts, are reserved.
Any violations give rise to a claim for
damages.
All rights, including rights created by
patent grants or registration of a utility
model or design, are reserved. Delivery
subject to availability; right of technical
modifications reserved.
All names of hardware and software
products mentioned in this manual are
trade names and/or trademarks of their
respective manufacturers.
This manual was
produced using paper
treated with chlorine-free
bleach.
01750227005 B - Installation guide & operating manual I
Contents
Introduction ............................................................................................... 1
Symbols used in this manual ...................................................................... 1
Important safety precautions ...................................................................... 2
Installation note ...................................................................................... 2
General safety precautions .................................................................... 2
Installation Planning ................................................................................. 7
CINEO C4080 Rearload ............................................................................. 8
Dimensions of the cable opening .......................................................... 8
Dimensions of safe attachment points .................................................. 9
CINEO C2060 ........................................................................................... 10
Dimensions of the cable openings ....................................................... 10
Dimensions of safe attachment points ................................................ 11
CINEO C2070 ........................................................................................... 12
Dimensions of the cable openings ....................................................... 12
Dimensions of safe attachment points ................................................ 13
CINEO C2550 without anchor chain ......................................................... 14
Dimensions of the cable opening ........................................................ 14
Dimensions of safe attachment points ................................................ 15
CINEO C2550 with anchor chain .............................................................. 16
Dimensions of the cable opening and of the cutouts ........................... 16
Dimensions of safe attachment points ................................................ 17
CINEO C2560 ........................................................................................... 18
Dimensions of the cable opening ........................................................ 18
Dimensions of safe attachment points ................................................ 19
Device overview ...................................................................................... 21
CINEO C2060 Frontload and CINEO C2070 Frontload ........................... 21
Operating panel opened - Equipment carriage A version .................... 21
Operating panel opened - Equipment carriage B version .................... 22
Basic operation ....................................................................................... 23
CINEO C2060 Frontload and CINEO C2070 Frontload ........................... 23
Opening the front door ......................................................................... 23
Closing the front door .......................................................................... 24
Contents
II - Installation guide & operating manual 01750227005 B
01750227005 B - Installation guide & operating manual III
Abbreviations
E
EMA Intruder alarm system
G
GmbH Limited liability company
S
SELV Safety Extra-Low Voltage
U
UPS Uninterruptible Power
Supply
Abbreviations
IV - Installation guide & operating manual 01750227005 B
01750227005 B Installation guide & operating manual 1
Introduction
This installation and operating manual contains information about project
specific changes and is an addition and replacement in the following manuals
partly:
CINEO C4080 Installation Manual 01750223447
CINEO C2060 Installation Manual 01750182388
CINEO C2060 Operating Manual 01750182392
CINEO C2070 Installation Manual 01750186614
CINEO C2070 Operating Manual 01750186612
CINEO C2550 Installation Manual 01750177940
CINEO C2560 Installation Manual 01750186625
Symbols used in this manual
Text following this mark represents an item in a list.
" " Text in quotation marks contains references to other chapters or sections in
this document.
Paragraphs following this symbol are actions to be performed in the order
in which they are specified.
Text following this symbol should be given special attention in order to
avoid damage and injury.
i
This symbol identifies paragraphs which contain general notes to
facilitate use of the device and help avoid operating errors.
Important safety precautions Introduction
2 Installation guide & operating manual 01750227005 B
Important safety precautions
Please read the following notes carefully before doing any work on the
device.
Be careful not to injure your head when the customer panel or the
operating unit door are lifted up!
Make sure that no water/liquids (e.g. rain, snow etc.) gets into the
open device and the exposed components, especially under adverse
weather conditions, since that could pose
a danger to your life.
If you work on an open device be sure to take appropriate precautions
(covering the device properly, for example) to prevent liquids from
getting into the device.
Installation note
When installing the device and/or doing any work on it, make sure that it is
disconnected from power.
Remove the shipping restraints inside the unit which secure its components
during transportation if necessary for the installation (see enclosed
information sheet).
General safety precautions
This device complies with the relevant safety regulations for information
processing equipment.
For reasons of stability, the device must be screwed to the load-bearing
substructure of the installation site or mounted on a suitable base.
When moving the device from a cold to a warm environment, do not
operate it for at least two hours to prevent possible damage caused by
condensation.
Only use the original packaging material to transport the device.
Note the warning and information labels on the device.
Introduction Important safety precautions
01750227005 B Installation guide & operating manual 3
Unless otherwise stated, grasp the components only by the green ledge
when handling them.
The device is equipped with a safety-tested power cable which must be
connected only to a suitable grounded outlet.
Always hold the plug when removing the power cable. Never pull the cable
itself.
Install cables in such a way that they will not be stepped on or tripped over
or damaged or crushed in any way.
Have damaged power cables replaced immediately.
Make sure that there is always free access to the sockets used or to the
electrical circuit-breakers of the house installation.
In case of an emergency (e.g. damaged cabinets, controls or power cables,
liquids or foreign objects in the device) take the following steps:
Deactivate the device immediately by:
Switching off the automatic circuit-breaker or removing the fuse inset
from the fuse holder in the distribution box of the building installation;
Disconnecting the plug connector of the power supply cable from the
grounded socket in the building installation;
Switching off the ON/OFF switch on the power distributor;
Interrupting the power connection, if there is one, between the UPS
(uninterruptible power supply) and the device (see chapter
“Introduction” section "General power interrupt" in the operating
manual);
During a thunderstorm, data transmission lines must not be connected or
disconnected.
Always keep the device's vents free from obstruction to ensure proper air
circulation and to prevent malfunctions resulting from overheating.
Only use accessories and extension components that have been approved
by us. Nonobservance can result in damage to the device or violations of
regulations concerning safety, radio interference and ergonomical
requirements.
Note that there are only safety extra-low voltage circuits (SELV circuits) if
you want to feed voltage from an external source into prepared cables to
Important safety precautions Introduction
4 Installation guide & operating manual 01750227005 B
install additional electronics (e. g. EMA connection, relay panel for external
features).
To clean and maintain the device only use cleaning agents approved by
WINCOR NIXDORF International GmbH (see chapter "Appendix" in the
operating manual).
Repairs
Repair work may only be carried out by authorized personnel.
Unauthorized opening of the device or repair work carried out
improperly could result in considerable danger to the user.
In case of noncompliance, WINCOR NIXDORF International GmbH
excludes all liability.
Lithium batteries
The handling and the replacement should only be performed by
authorized service personnel who were trained by the
WINCOR NIXDORF International GmbH.
There is danger of fire or explosion if the batteries are handled
improperly. It is therefore important to note the following points:
– Avoid short circuits
– Never recharge the battery
– Avoid temperatures above +100 °C (+212 °F).
– Do not try to open the battery by force
– Do not allow the battery to come in contact with water or fire
The battery should only be replaced with the same or an equivalent
type recommended by WINCOR NIXDORF International GmbH (see
chapter “Appendix,” section “Consumables”).
Dispose of used batteries in compliance with national regulations and
the manufacturer's specifications.
Introduction Important safety precautions
01750227005 B Installation guide & operating manual 5
Start-up
i
Before operating the device, remove all parts inside of it which secure
its components during transportation or check whether they have been
removed (see info sheet supplied with the device).
Important safety precautions Introduction
6 Installation guide & operating manual 01750227005 B
01750227005 B Installation guide & operating manual 7
Installation Planning
This chapter provides you with all the information you need to prepare the
installation.
i
From the time of installation up to the start-up of the device, the
climatic environmental conditions for storage must be met (see
chapter "Appendix").
Make sure that the values are neither higher nor lower than the
specified values to prevent irreparable damage to the device.
In the event of non-compliance, WINCOR NIXDORF
International GmbH shall not assume liability for any damage that is
caused to the device.
CINEO C4080 Rearload Installation Planning
8 Installation guide & operating manual 01750227005 B
CINEO C4080 Rearload
Dimensions of the cable opening
i
All dimensions are specified in millimeters (inches). The device vie
ws
are not drawn to scale.
1
Cable opening
Installation Planning CINEO C4080 Rearload
01750227005 B Installation guide & operating manual 9
Dimensions of safe attachment points
6
5
(
2
.
5
6
"
)
5
5
0
(
2
1
.
6
5
"
)
9
0
0
(
3
5
.
4
3
"
)
430 (16.93")
790
(31.1")
425 (16.73")
80
(3.15")
165 (6.5")
300
(11.81")
638 (25.12")
ø 48 (4x)
(1.89")
ø 28 (4x)
(1.1")
ø 22
(0.87")
ø 28
(1.1")
1
1
Tear-off sensor
CINEO C2060 Installation Planning
10 Installation guide & operating manual 01750227005 B
CINEO C2060
Dimensions of the cable openings
i
All dimensions are specifie
d in millimeters (inches). The device views
are not drawn to scale.
1
Cable opening
Installation Planning CINEO C2060
01750227005 B Installation guide & operating manual 11
Dimensions of safe attachment points
440 (17.32")
315
(12.4")
160
(6.3")
600 (23.62")
100
(3.94")
550 (21.65")
900 (35.43")
65
(2.6")
1
22
(0.87")
22 (4x)
(0.87")
45 (4x)
(1.77")
1 Tear-off sensor
CINEO C2070 Installation Planning
12 Installation guide & operating manual 01750227005 B
CINEO C2070
Dimensions of the cable openings
i
All dimensions are specified in millimeters (inches). The device views
are not drawn to scale.
1
1 Cable opening
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
Diebold Nixdorf CS 2550 Operating instructions
- Type
- Operating instructions
Diebold Nixdorf CS 2550 is a highly versatile and functional device that offers a wide range of capabilities to meet your specific business needs. With its advanced features and user-friendly design, the CS 2550 is an ideal choice for businesses of all sizes.
Here are just a few of the things you can do with the Diebold Nixdorf CS 2550:
- Process cash transactions quickly and efficiently
- Manage your inventory and track sales
- Provide exceptional customer service
- Reduce costs and improve profitability
The CS 2550 is also highly configurable, so you can tailor it to meet the specific needs of your business. With its modular design, you can add or remove components as needed, ensuring that you always have the right tools for the job.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Diebold Nixdorf Coin Sidecar Operating instructions
-
-
-
-
-
-
-
-
-
Other documents
-
Wincor Nixdorf CINEO C1020 Operating instructions
-
Wincor Nixdorf CINEO C1030 User manual
-
-
-
-
-
V7 VPL1218-1E Datasheet
-
Barco CNHD-81B User guide
-
-
Konica Minolta AccurioPress C2070 Safety Information Manual