Skov Fan control configuration in DCT 920 -1E and -4E fans Technical User Guide

  • Hello! I've reviewed the technical user guide for SKOV DCT 920-1E and DCT 920-4E fans. This document details how to configure fan speed using the digital input D1, with options for analog signal control or fan stop. I'm ready to answer any questions you have regarding these fan models.
  • How is the fan speed controlled?
    What happens when D1 is connected to GND?
    What happens when D1 is connected to 24V?
2019.08.27 • 604387
Important information about
fan control configuration in
DCT 920 -1E and -4E fans
DCT 920 fan configuration of D1 control input.
In a DCT 920-1E and DCT 920-4E fan, the speed control is
activated via a potential-free contact at the digital input D1.
D1 connected to GND:
The 0 - 10V (E1) analog signal controls the fan speed.
D1 connected to 24V:
The fan is stopped regardless of the 0 - 10V (E1) analog
signal input.
Regarding further information about wiring of SKOV A/S fan
systems, please read the Technical user guide DCT 920 fans
(604187).
SKOV A/S • Hedelund 4 • Glyngøre • DK-7870 Roslev
Tel. +45 72 17 55 55 • Fax +45 72 17 59 59 • www.skov.com • E-mail: skov@skov.dk
2019.08.27 • 604387 04.03.04 • EN • Made in Denmark
/