Master VA0600 Operating instructions

Brand: Master

Model: VA0600

Type: Operating instructions

REPAIR

Directions to use:

1. All surfaces must be dry and free of

contaminants such as dirt, grease, chalk,

mildew, oils and old loosed sealant.

2. Apply one coat of Masterflex Roof Primer

over cracks or seams and 3 inches to both

sides.

3. With a trowel or brush apply Masterflex

Crack Filler on entire length of seams or

cracks, and two inches to each side.

4. While Masterflex Crack Filler is wet roll

out the Masterflex Patching Weave and

place it over the crack or seam. Immediately

after apply another coat of Masterflex Crack

Filler over the patching weave. Make sure

the patching weave is completely covered

with Masterflex Crack Filler.

5. Let it dry fully before top coating or

applying any roof sealer.

300602693997

VA 0600

MASTER PAINTS & CHEMICAL CORP.

P.o. Box 560248 Guayanilla, P.R. 00656-0248

Carr. #127 Km. 12.7 Bo. Magas,

Guayanilla P.R. 00656

Tel. 787-740-5254 • Fax 787-740-3056

Tel. 787-835-4000 • Fax 787-835-2965

www.mastergroup-pr.com

Fiber-Glass Patching Weave

is a strong and flexible

white patching weave

made of the finest fiberglass

materials reinforced

with resins.

Fiber-Glass Patching Weave

provides a strong flexible

repair that allows for

expansion and contraction

on cracks 1/32 inch or more,

seams and stress areas.

This product is designed to be

used with Masterflex Crack Filler

and Masterflex Waterproofing Systems.

Limited Warranty: The liability in connection with

the sale of this product extends only to the

replacement price if it should fail to comply with

quality standards. This warranty excludes cost of

labor for the application of the product. KEEP OUT

OF REACH OF CHILDREN

Master VA0600 Operating instructions

Master VA0600 Operating instructions

Master VA0600 Operating instructions

Related papers

Other documents