Master VV1247 Operating instructions

Brand: Master

Model: VV1247

Type: Operating instructions

This manual is also suitable for

VV1246

SPEC DATA SHEET

1 | Page MASTER PAINT & CHEMICAL CORP. CARR#127 KM 12.7 BO. MAGAS GUAYANILLA PR 00656

TEL: 787-835-4000 / FAX: 787-835-2965 / E-FAX: 787-966-7180

Rev. May , 2016

Supersedes May 15, 2015

Masterflex Tropical Seal®

Advanced Roof Sealer Formula Against Mold and Mildew

SECTION 1 - PRODUCT DESCRIPTION

SECTION 2 - TYPICAL USE

SECTION 3 - PRODUCT ADVANTAGE

SECTION 4 - COLO

SECTION 5 - GLOSS

Masterflex Tropical Seal® is an acrylic elastomeric fiber-reinforced roof sealer recommended for the correction of problems due to the

filtration of roofs caused by capillarity, crevices, or joints when adding new constructions to those already in existence. It is formulated with

acrylic polymers as a base, which provides a formulation of maximum elasticity, creating highly flexible membrane with the capacity to

contract and expand without affecting the adhesion. It doesn’t require a roof primer before. It leaves a white brilliant finish, reducing the heat

absorption of the surfaces, thus allowing the interior temperature to decrease saving energy consumption and interior environment more

comfortable. Masterflex Tropical Seal seals blue to protect the applicator’s eyes, resulting in a ultra-white finish after several days. It is an

Energy Star Partner program, certification granted by the U.S. Environmental Protection Agency (EPA) and the U.S. Department Energy to

products that help conserve or save energy.

Masterflex Tro

ical Seal® is used to seal concrete, wood, metal and foam surfaces.

 Ultra white, 100% Acrylic Elastomeric

 Eliminates all kind of water filtrations

 For all vertical & horizontal surfaces

 Maximum elongation

 Easy to apply

 Highly flexible

 High performance

 2 in 1 Prime

and Seale

Brilliant Ultra White finished

Flat

SECTION 6 - COMPOSITION

100% Elastomeric Acrylic Resins, free of lead, chromates and mercury.

SECTION 7 – PHYSICAL AND CHEMICAL PROPERTIES

Viscosity: 110 – 120 KU (Stormer) Flash Point: None Weight per gallon: 10.6 +/- 0.3 lbs/gal

Solids per Volume: 50% Solids per weight: 60% VOC Content: 47 g/lt

SECTION 8 – SURFACE PREPARATION



Excellent adhesion

 Blue colored to protect the applicator’s eyes

 Polyfiber plus Technology made out of resins, fibers and additives.

Certified Roof Formula that reduces mold and mildew on the dry

sealer film, maintaining the roof white to save energy.

The roof or surface should be free from dust, sand, cement, fungus or any strange particles. This can be accomplished by means of a pressure

washer. In order to eliminate the fungus, prepare a solution of one quart of liquid bleach for every three quarts of water. Rinse with clear

water and wait until surface is completely dry.

Improve all water drainage areas where it’s necessary, and make corrections in the water ponding areas. This product is not formulated for

immersion.

SPEC DATA SHEET

2 | Page MASTER PAINT & CHEMICAL CORP. CARR#127 KM 12.7 BO. MAGAS GUAYANILLA PR 00656

TEL: 787-835-4000 / FAX: 787-835-2965 / E-FAX: 787-966-7180

Rev. May , 2016

Supersedes May 15, 2015

The information and recommendations set forth in this Product Data Sheet are based upon test conducted by Master Paints and

Chemical Corp. Since application variables are a major factor in product performance, this information should serve only as a

general guide. Improvements in coating technology may cause future technical data to vary from what is in this bulletin. Consult

your Master Paints and Chemical Corp. representative or call 787 835 4000 to obtain the most recent Product Data Sheet

SECTION 9 - APPLICATION

SECTION 10 – APPLICATION TOOLS

SECTION 11 – CAUTION

SECTION 12 – FIRST AID

SECTION 13 – PACKAGING

1 gallon and 5 gallon pails

Before attempting to apply, mix the product thoroughly. For a longer durability, let it dry for 24 hours and then apply a second coat. For

maximum durability of the product, we recommend the application of Mega Seal Acrylic Primer, which are 100% acrylic products designed

for sealing any crevices and pores, creating an appropriate base for the application of Masterflex Tropical Seal®.

This product is not formulated for immersion.

Recommended Film Thickness: 20 mils dry / Two coats must be applied in order to get the recommended dry film thickness (20 MDFT)

Coverage: (One Coat)

Concrete Surface: 80 square feet per gallon @ 10 MDFT / 400 square feet per pail @ 10 MDFT

Metal Surface: 160 square feet per gallon @ 5 MDFT / 800 square feet per pail @ 5 MDFT

Wood Surface: 80 square feet per gallon @ 10 MDFT / 400 square feet per pail @ 10 MDFT

Foam Surfaces: 80 square feet per gallon @ 10 MDFT / 400 square feet per pail @ 10 MDFT

Roof Shingles: 80 square feet per gallon @ 10 MDFT / 400 square feet per pail @ 10 MDFT

Thinning: Not recommended

Dry time: 1-2 hours to touch / 24 hours to recoat

Clean UP: Clean painting tools and hands with soap and water.

It can be applied using a brush, roller, or atomizer.

HARMFUL IF SWALLOWED. MAY CAUSE EYE, NOSE AND THROAT IRRITATION. AVOID CONTACT WITH SKIN AND EYES

AND AVOID BREATHING OF VAPORS AND SPRAY MIST. USE ONLY WITH ADEQUATE VENTILATION. When applying spray,

use respiratory protection (NIOSH/MSHA TC23C or equivalent), eye protection and protective clothing. Before use, ask and read the Safety

Data Sheet (SDS) of the product, available at Master Paint & Chemical Corp. Close container after each use. KEEP OUT OF REACH OF

CHILDREN.

In case of skin contact, remove product from skin with soap and water. When eye contact with products occurs, rinse affected area with large

amounts of water at least 15 minutes and get immediate medical attention. If swallowed, medical attention is needed immediately. Do not

apply late in the day or when rain or dew is likely. Storage the air tight sealed product in a dry and well ventilated environment. For proper

disposal of excess material, please contact your local city waste management agency. PLEASE DO NOT DISPOSE OF REMNANTS IN

SEWERS.

How to Correct Cracks: Clean cracks, and apply Master Crack Filler and the Master Fiberglass Patch Weave over the cracks and one inch on

both sides. Let it dry for twenty four (24) hours and then apply a second coat.

WARNING! If you scrape, sand, or remove old paint, you may release lead dust or fumes. LEAD IS TOXIC. EXPOSURE TO LEAD

DUST OR FUMES CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY IN CHILDREN. PREGNANT

WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a properly fitted NIOSH approved respirator and prevent skin contact to control

lead exposure. Clean up carefully with a HEPA vacuum and a wet mop. Before you start, find out how to protect yourself and your family by

contacting the USEPA National lead Information Hotline at 1-800-424 LEAD or log on to www.epa.gov/lead.

SPEC DATA SHEET

3 | Page MASTER PAINT & CHEMICAL CORP. CARR#127 KM 12.7 BO. MAGAS GUAYANILLA PR 00656

TEL: 787-835-4000 / FAX: 787-835-2965 / E-FAX: 787-966-7180

Rev. May , 2016

Supersedes May 15, 2015

Master VV1247 Operating instructions

Brand: Master

Model: VV1247

Type: Operating instructions

This manual is also suitable for

VV1246

Download PDF

report

Master VV1247 Operating instructions

This manual is also suitable for

Master VV1247 Operating instructions

Related papers

Other documents