Page is loading ...
USER MANUALJB. 5619-a / Made in China. © KitSound is a trademark of Kondor Limited, 2017. Christchurch, Dorset, BH23 4FL, UK
Your product and batteries must be recycled or disposed of properly.
Please contact your local recycling centre for more information on proper disposal.
All trademarks are acknowledged as the property of their respective owners.
Unless otherwise stated their use does not imply that the trademark owner is aliated
with KitSound or endorses the products herein.
kitsound.co.uk
BOOM DAB
DAB/DAB+/FM RADIO
+ WIRELESS
2 3
Please read this manual carefully before use.
Box contents
• KS Boom DAB
• AC power cord
• 3.5 mm aux-in cable
• User manual
Product layout
Front view
1. LCD Display
2. Signal Indicator for DAB/FM
3. Volume Dial
Top view
4. Info
5. < Previous Track/Station/Option
6. > Next Track/Station/Option
7. M e n u
8. Preset/Pair
9. Multi Function Button (MFB): Power, Play/Pause, Enter
10. Mode
11. Alarm/Snooze
Back view
12. Extendable Aerial
13. AC Socket
14. Aux-in Port
15. USB Port
1 2
3
12
1415 13
45 6
8
9
11
10
7
4 5
DAB mode
Listening to DAB broadcast
1. Fully extend the Extendable Aerial (12)
2. Press Mode (10) until you reach DAB on the LCD Display (1)
3. The Boom DAB will automatically search for a station
4. Once scan is complete, the Boom DAB will select the rst station on the list and will automatically set the time and date
on the LCD Display (1)
5. To change station use Next Track (6) or Previous Track (5)
6. To select station please press MFB (9) once on desired station
7. If no stations are detected the LCD Display (1) will read ‘NO DAB Station’
Note: Try another area if no station is found.
Pre-setting stations in the DAB radio memory
1. In DAB playing mode, nd the desired DAB station
2. Press and hold Preset (8) until ‘PRESET STORE’ is shown and “1
çemptyè” will show on the display
3. Press Next Track (6) to choose the number you desire for this station and conrm
4. Repeat to store up to 20 stations in the memory
Recalling DAB pre-set stations
In DAB playing mode, press Preset (8) so that ‘PRESET RECALL’ shows on the display, press Next Track (6) until you reach your desired
station, and conrm the station.
Instructions for use
Set up
• Remove all packaging material from the Boom DAB and place on a stable, level surface
• Make sure that it is close to a mains socket, out of direct sunlight and away from sources of excess heat, dust, moisture, humidity,
or a strong magnetic eld
• Please only use the supplied adaptor. Attempting to operate this system from any other power source may cause damage to the
system and invalidate your warranty
Getting started
1. Plug the AC cord into the AC Socket (13) and connect the plug to a mains socket
2. The LCD Display (1) will light up and the Boom DAB will automatically enter standby mode
3. The Boom Dab works in 4 dierent languages. Please see ‘Language’ to set up
General operation
• Press and hold MFB (9) for 3 seconds to put the Boom DAB on
• Press and hold MFB (9) for 3 seconds to put the Boom DAB into standby mode
• To select or conrm settings, press MFB (9)
• To navigate between options, press the Next Track (6) or Previous Track (5)
• Press Info (4) whilst on a station to display dierent information on DAB/FM function
• Press the Menu button (7) and select ‘System’ to access system settings
• While in standby mode the LCD Display (1) backlight will be dimmed. During any mode, press any button once to turn on the LCD
display backlight
6 7
DAB menu
In DAB mode, press Menu (7) to enter DAB settings, and use Next Track (6) or Previous Track (5) to scroll.
1. Full Scan
• Press MFB (9) to select and the Boom DAB will automatically scan all DAB stations
2. Manual tune DAB
• Press MFB (9) to select and the Boom DAB will start to automatically scan all DAB stations
• Use Next Track (6) or Previous Track (5) to display a specic channel/frequency
• Press MFB (9) to tune your desired station
3. Dynamic Range Compression (DRC)
• Press MFB (9) to select, and then again to select desired option (O, Low and High)
• Press the Menu button (7) to go back to the Boom DAB screen
4. Removing DAB stations
If a station shows up but the Boom DAB can’t connect, you can delete these stations.
• Press the Menu button (7)
• Press MFB (9) to select ‘Prune’ and press again to conrm ‘Yes’
5. System
• Press MFB (9) to select ‘System’
• Here you can change the sleep, alarm, time, and language settings, reset all settings, and nd the software version
FM mode
Listening to FM radio
1. Fully extend the Extendable Aerial (12)
2. Press Mode (10) until you reach FM on the LCD Display (1)
3. Press and hold Next Track (6) or Previous Track (5) to search the station, and the Boom DAB will automatically stop on every
station it nds
4. Short press Next Track (6) or Previous Track (5) for ne tuning
Pre-setting stations in the FM radio memory
1. In FM playing mode, nd the desired FM station
2. Press and hold Preset (8) until ‘PRESET STORE’ is shown and “1
çemptyè” will show on the LCD Display (1). Use Next Track (6)
to choose the number you want for this station and conrm
3. Repeat to store up to 20 stations in the memory
Recalling FM pre-set stations
• In FM playing mode, press Preset (8) so that ‘PRESET RECALL’ shows on the display
• Select your desired station and press MFB (9) to conrm
8 9
FM menu
In FM mode, press Menu (7) to enter FM settings, and use Next Track (6) or Previous Track (5) to scroll.
1. Scan settings
• Press MFB (9) to select ‘Scan setting’, and press Next Track (6) to change between ‘strong stations only’, or ‘all stations’
• Press MFB (9) to conrm your selection
2. Audio settings
• Press MFB (9) to select ‘Audio setting’
• Press Next Track (6) to change between ‘forced mono’ or ‘stereo allowed’
• Press MFB (9) to conrm your selection
3. System
• Press MFB (9) to select ‘System’
• Here you can change the sleep, alarm, time, and language settings, reset all settings, and nd the software version
Note: You should always be in stereo mode. Forced mono is used when you have a weak signal and the radio is struggling to connect.
When this happens, you should change mode.
Pairing and listening in Bluetooth mode
1. Press Mode (10) until you reach Bluetooth mode on the LCD Display (1)
2. The LCD Display (1) will ash ‘Bluetooth Disconnected’ while looking for a device to pair with
3. Turn on your iOS, Android, or Windows device’s Bluetooth ON and search for new devices, and select the speaker name
‘KS BOOMDAB’ from the list of found devices
4. If your device asks for a passkey then enter the digits ‘0000’ and press OK
5. When pairing is successful the LCD Display (1) will ash ‘Bluetooth Connected’
Note: If there is an existing wireless connection, press and hold Pair (8) for 3 seconds and it will break the current connection.
To reconnect, refer back to ‘Listening in Bluetooth mode’.
Note: ‘Bluetooth’ is a trademark of Bluetooth SIG, Inc. This product is in no way aliated or endorsed by Bluetooth SIG Inc.
When connected via wireless, you can either control the music through your device or using the Boom DAB. If using the Boom DAB:
• Use Next Track (6) or Previous Track (5) to change song
• Press MFB (9) to play/pause your song
• Turn Volume (3) to increase or decrease the volume
Aux-in mode
1. Press Mode (10) until you reach AUX on the LCD Display (1)
2. Plug one end of the aux cable into the Aux-in Port (14) and the other end into the aux-in port on your device
3. Play music through your device, and the sound will play through the Boom DAB
Note: When connected via aux-in, you can only control the music through your device. Turn Volume (3) to increase or decrease the volume.
10 11
Sleep setting
To send the Boom DAB to sleep at your chosen time:
1. Press Menu (7), and use Next Track (6) or Previous Track (5) to scroll and press MFB (9) to select ‘System’
2. Use Next Track (6) or Previous Track (5) to scroll and press MFB (9) to choose ‘Sleep’
3. Find your desired sleep delay time (OFF, 15, 30, 45, 60, 90), and conrm your option by pressing MFB (9)
4. The sleep icon
will show on the LCD Display (1) when on
5. When you do not want a sleep delay timer, select ‘OFF’
Setting Alarm 1
To access the alarm feature, either press and hold the Alarm/Snooze button (11) for 3 seconds or press Menu (7), and use MFB (9) to
select ‘System’ and then ‘Alarm’.
1. Alarm 1 setup will be displayed, along with dierent options. Press MFB (9) to conrm each setting choice and to move onto the
next stage
2. Press Next Track (6) or Previous Track (5) to adjust the hour, minutes, duration (90, 60, 45, 30 or 15) and source of the alarm
(Buzzer, DAB or FM)
• DAB – Choose from last listened, pre-set 1 or pre-set 2
• FM – Choose from last listened and pre-set 1
3. Set the alarm frequency (Daily, Once, Weekends, and Weekdays)
4. To conrm the alarm, press MFB (9) with the Alarm set to on. ‘Alarm Saved’ will show on the LCD Display (1)
5. To cancel alarm, repeat the above process but when asked to conrm, choose O and press MFB (9) to conrm
Note: Press Menu (7) to cancel the setup of the alarm.
Note: The clock icon will always ash on the display during the alarm setting process. In alarm mode, if you don’t begin setting the
alarm within 3 seconds, the Boom DAB will exit alarm mode.
Setting Alarm 2
1. Press and hold the Alarm/Snooze (11) for 3 seconds and press Next Track (6) to select Alarm 2
2. Follow instructions from ‘Setting Alarm 1’
Alarm/Snooze
When the alarm sounds, you can either press and hold MFB (9) to cancel the alarm, or press the Alarm/Snooze button (11) to delay the
alarm for another 10 minutes.
If you keep pressing the Alarm/Snooze button (11) you can delay the alarm from a range of values from between 10, 15, 30 and 45
minutes. The snooze delay can be changed again during the count down, repeat the above process. To cancel the snooze countdown,
press and hold MFB (9) for 3 seconds.
Setting the time and date
By default, the Boom DAB will automatically update the time through its DAB connection. However, you can still set the time manually.
To do this:
1. Press Menu (7) and use Next Track (6) or Previous Track (5) until you nd ‘System’. Press MFB (9) to conrm
2. Use Next Track (6) or Previous Track (5) to select ‘Time’ and press MFB (9) to conrm
3. Use Next Track (6) or Previous Track (5) to adjust the hour, minute, year, month, and day
4. Press MFB (9) to conrm each setting and move onto the next stage
5. The time and date will now be set
12 13
Language
1. Press Menu (7) and use Next Track (6) or Previous Track (5) until you nd ‘System’. Press MFB (9) to conrm
2. Use Next Track (6) or Previous Track (5) and then MFB (9) to select ‘Languages’
3. Use Next Track (6) or Previous Track (5) until you nd your desired language
4. Press MFB (9) to conrm
Factory reset
Doing a factory reset will completely wipe all saved data on the Boom DAB. It will reset all sleep settings, alarms, languages, time, date,
and presets.
1. Press Menu (7) and use Next Track (6) or Previous Track (5) until you nd ‘System’. Press MFB (9) to conrm
2. Press MFB (9) to select ‘Factory Reset’, use Next Track (6) or Previous Track (5) to select ‘Yes’ or ‘No’, and press MFB (9) to conrm
3. ‘Restarting…’ will appear on your Boom DAB and it will go back to standby mode
Software (SW) version
SW version shows you what software the Boom DAB is running on:
1. Press Menu (7) and use Next Track (6) or Previous Track (5) until you nd ‘System’. Press MFB (9) to conrm
2. Use Next Track (6) or Previous Track (5) to select ‘SW Version’ and press MFB (9) to conrm
3. Press Menu (7) to exit
Care for your Boom DAB
Please DON’T
• Get the Boom DAB wet
• Drop the Boom DAB as this will invalidate your warranty
• Open up the Boom DAB. There are no user serviceable parts inside
• Expose the Boom DAB to extreme temperatures or rapid changes of hot to cold or vice versa
Please DO
• Clean the Boom DAB with a soft dry cloth and no detergents
Specications
Works with Bluetooth V2.1
Wireless connectivity range up to 10 m
Output RMS 20 W
Frequency response 40 Hz – 20 kHz
Screen LCD
Presets 20
Aux-in 3.5 mm
Languages English, French, German, and Italian
Battery type Lithium Polymer 550 mAh, rechargeable
14 15
We apologise for any inconvenience caused by minor inconsistencies in these instructions, which may occur as a result of product improvement and development.
The use and operation of this speaker is beyond our control. Warranty of the Boom DAB is limited to defects caused by faulty manufacture or defects in materials only.
No warranty whatsoever is given or implied for damage caused by the user under any circumstances.
This does not aect your statutory rights.
Please do not attempt to open this product. There are no user serviceable parts inside. If your product has an embedded, non-replaceable battery, do not attempt to
access or remove the battery. This may cause personal injury and will damage the product.
Making any attempt to open the product or carry out repair voids any and all warranties.
Troubleshooting
We hope you’ve now got all the information you need to get started, but if you’re having problems with anything, please feel free to
contact us at: [email protected].uk
‘Hereby, Kondor Ltd declares that the radio equipment type,
KSBMDAB Boom DAB, is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet address:
http://kondor.co.uk/product-documents.’
/
