Page is loading ...
IMMERSE
ACTIVE NOISE CANCELLING
WIRELESS HEADPHONES
USER MANUAL
WARNING: To prevent possible hearing damage, do not listen at high volume levels for long periods.
For your own safety, please be aware of your surroundings when using these earphones.
Your product and batteries must be recycled or disposed of properly.
Please contact your local recycling centre for more information on proper disposal.
All trademarks are acknowledged as the property of their respective owners.
Unless otherwise stated their use does not imply that the trademark owner is
aliated with KitSound or endorses the products herein.
JB.4687 / Made in China. © KitSound™ 2016. Christchurch, Dorset, BH23 4FL, UK
We are craftspeople. We are musicians. We are KitSound
™
And we all commit ourselves to achieving one shared goal:
Bringing people closer to their music. By truly understanding
music we stay true to its craft. Pure, rich, incredible sound.
We’ll settle for nothing less.
4 5
Please read this manual carefully before use.
Box contents
• KS Immerse Wireless Active Noise Cancelling Headphones
• USB charge cable
• 3.5 mm aux-in cable
• 3.5 mm double hack in-ight adaptor
• User manual
• Carry pouch
Functions
1. Active Noise cancelling on/o
2. Multi-function button (MFB)
3. Track forward / Volume up
4. Track backward / Volume down
5. 3.5 mm aux-in
6. Micro USB input
7. Bluetooth LED indicator
8. Active Noise cancelling LED indicator
768 5
1
6
3
2
4
6 7
Instructions for use
Charging the battery
1. Connect the micro USB end of the charging cable to the Micro USB input (6)
and the standard USB end to a PC USB port or USB mains charger
2. The Bluetooth LED indicator (7) will be red whilst charging. It will turn green
after around 2.5 hours. The battery is now fully charged
Note: The rst charge may take up to 3 hours to complete.
Pairing a Bluetooth device
1. Start by holding the MFB (2) down for 4 seconds. You will see the Bluetooth
LED indicator (7) ash blue and red alternatively, indicating that it has entered
pairing mode
2. Activate the Bluetooth feature on your device and search for Bluetooth devices
(check your device’s manual if you’re unsure how to do this)
3. Select ‘KS IMMERSE’ from the list of found devices
4. If asked for a passcode, enter ‘0000’ or ‘1234’ and the headphones will then be
connected to your device
5. After pairing successfully, will blink purple twice; you can then answer the
phone or listen to your music
6. While listening to music the Bluetooth LED indicator (7) will blink blue every 3 seconds
7. The next time the headphones are switched on, they will automatically search
for and attempt to connect to the last paired device
Re-pairing or pairing new devices
1. Make sure Bluetooth is turned o on any previously paired devices
2. Follow the ‘Pairing a Bluetooth device’ instructions from step 1
Call-handling
Answer a call When a call comes through, the headphones will play a
ringtone. Press the MFB (2) to answer. During the call you
can control the volume by using the Volume up (3) and
Volume down (4) buttons on the headset
End call During a call, press the MFB (2) to end call
Re-dial Whilst not in a call, hold the MFB (2) for 1 second to redial
Playing music
Play/Pause Press the MFB (2) to switch between play and pause status
Adjusting the volume Hold Volume up (3) and Volume down (4) buttons to
control the volume. The volume can also be adjusted
on your device
Music selection Press the Track forward (3) and Track backward (4)
buttons to switch songs
8 9
Active Noise cancelling
1. Push the Active Noise cancelling on/o (1) switch to activate
2. When the Active Noise cancelling on/o (1) switch is activated,
the Active Noise cancelling LED indicator (8) will be blue
Warning: It is not recommended that this product should be used driving or
walking as will prevent you from hearing warnings that could be a danger to
you or others.
Note: Active Noise cancelling will not work when battery has drained and the
wired connection is being used.
Wired use
1. Connect the 3.5 mm cable provided into the 3.5 mm aux-in (5)
2. Connect the other end of the 3.5 mm cable into your device
3. When you play music on your device, the audio should now be
heard through the headphones
Care for your Immerse
Please DON’T:
• Get the Immerse wet
• Drop the Immerse as this will invalidate your warranty
• Open up the Immerse. There are no user serviceable parts inside
• Expose the Immerse to extreme temperatures or rapid changes of hot to cold or
vice versa
Please DO:
• Clean the Immerse with a soft dry cloth and no detergents
Battery information
• Your device is powered by a rechargeable battery. Unplug the charger from
the electrical plug and the device when not in use
• If left unused, a fully charged battery will lose its charge over time.
We recommend a full charge twice a month to ensure battery integrity
• Please do not leave the device in hot or cold places, such as in a closed
car in summer or winter conditions as it will reduce the capacity and lifetime
of the battery
• Do not dispose of batteries in a re as they may explode. Batteries may also
explode if damaged
10 11
Specications Troubleshooting
• If you cannot connect the headphones to your device, please try the following:
– Ensure that the headphones are charged, switched on, paired with and
connected to your device
– Check the headphones are within 10 metres (30 feet) of your device and that
there are no obstructions (such as walls or other electronic devices) between
the headphones and the device
– Only one device may be paired to these headphones at a time, so please ensure
there are no conicting Bluetooth devices trying to connect to the headphones
• If the headphones will not switch o, they can be reset back to normal by putting
them on charge
• If you receive an intermittent signal, please ensure the headphones are fully
charged before continuing use
• If you do not use the headphones for longer than 3 minutes whilst not connected
to a device, they will automatically power o to conserve power
We hope you’ve now got all the information you need to get started, but
if you’re having problems with anything, please feel free to contact us at:
Please do not attempt to open this product. There are no user serviceable parts inside, in particular
if your product has an embedded, non-replaceable battery, do not attempt to access or remove the
battery as this may cause personal injury and will damage the product.
Making any attempt to open the product or carry out repair voids any and all warranties
We apologise for any inconvenience caused by minor inconsistencies in these instructions, which may
occur as a result of product improvement and development.
Bluetooth V4.1
Bluetooth range up to 10 m
Frequency response 20 Hz – 20 kHz
Talk time (NC and BT turned on) 15 hours
Play time (NC and BT turned on) 12 hours
Standby time up to 30 hours
Environmental Noise Cancellation 25 dB reduction
Battery type Lithium Polymer 550 mAh, rechargeable
Power requirement 5 V DC
/
