OUTWATER BP-DW4-BLK User manual

Brand: OUTWATER

Model: BP-DW4-BLK

Type: User manual

OUTWATER BP-DW4-BLK bypassing hardware kit is designed for double sliding wood doors. It enables smooth and quiet operation, allowing you to bypass one door in front of the other. The kit includes all necessary components, such as door rollers, wall brackets, floor guides, and anti-jump disks, ensuring a secure and stable installation. With its heavy-duty construction, this hardware kit is suitable for both residential and commercial applications, providing a space-saving solution for your interior doors.

OUTWATER BP-DW4-BLK bypassing hardware kit is designed for double sliding wood doors. It enables smooth and quiet operation, allowing you to bypass one door in front of the other. The kit includes all necessary components, such as door rollers, wall brackets, floor guides, and anti-jump disks, ensuring a secure and stable installation. With its heavy-duty construction, this hardware kit is suitable for both residential and commercial applications, providing a space-saving solution for your interior doors.

BARN

DOOR

HARDWARE

CLASSIC

STRAP

Bypassing hardware kit for double sliding wood doors.

MODEL No. BP-DW4-BLK

Architectural Products by Outwater assumes no liability for improper installation.

INSTALLATION MANUAL

INCLUDED IN KIT

A

B

C

D

E

G H I

J

K

M

O

N

L

ADoor Roller Hardware x4

BM8x60 Bolt x10

CM8x30 Wall Anchor x10

DWall Bracket x10

E78 3/4" Rail x2

FST8x90 Bolt + Washer x10

GRouted Floor Guide x2

HFloor Anchor x4

IST4.2x25 Screw x4

JDoor Stop x4

K2.5mm Allen Keys x1

LAnti-Jump Disk x4

MM8x60 Bolt + Nut x5

NM8x60 Bolt + Washer x10

OBypassing Bracket x5

F

BYPASSING CLASSIC STRAP

NOTES

TOOLS REQUIRED

• Plumb Line

• Pencil

• Phillips Head Screwdriver

• 8mm Drill Bit

• 5.5mm Drill Bit

• 10mm Routing Drill Bit

• Wrench

• Level

• Tape Measure

• Power Drill

Architectural Products by Outwater assumes no liability for improper installation.

To obtain maximum weight capacity, all fasteners

must be mounted into solid wood studs or wall

blocking or mounted to a header board.

Consult a structural engineer if you have questions

about what type of wall blocking is required.

Drill out holes in the doors using a 10mm routing drill bit as

pictured. The bottom of the doors should be routed at this

time in order to accept the oor guide.

BYPASSING CLASSIC STRAP

Find the centerline of the track. Using a level, mark a

horizontal line twice the door width long. Mark the bracket

screw locations into the wall blocking. Attach the wall portion

of the brackets as shown.

Insert the door stops to the rail. One at each end, then attach

the rail to the wall brackets using a wrench to fasten the bolts

as shown.

Wall Blocking

Architectural Products by Outwater assumes no liability for improper installation.

BYPASSING CLASSIC STRAP

Attach the anti-jump disks to the tops of the door.

Use a wrench to attach the bypassing brackets to the

wall and rail as pictured.

Insert the door stops to the rail. One at each end and attach the

second rail to the bypassing brackets as shown.

Attach the door to the rails making sure that the anti-jump disks

are engaged to avoid a serious accident.

Architectural Products by Outwater assumes no liability for improper installation.

BYPASSING CLASSIC STRAP

Attach the door to the rails making sure that the anti-jump

disks are engaged to avoid a serious accident.

Adjust the door stops accordingly using the provided 2.5mm Allen key.

Plumb the door and mark the positions of the oor guides.

Mount the oor guides to the oor.

Architectural Products by Outwater assumes no liability for improper installation.

BYPASSING CLASSIC STRAP

Install the end cap covers.

Architectural Products by Outwater assumes no liability for improper installation.

1
2
3
4
5
6

OUTWATER BP-DW4-BLK User manual

Brand: OUTWATER

Model: BP-DW4-BLK

Type: User manual

OUTWATER BP-DW4-BLK bypassing hardware kit is designed for double sliding wood doors. It enables smooth and quiet operation, allowing you to bypass one door in front of the other. The kit includes all necessary components, such as door rollers, wall brackets, floor guides, and anti-jump disks, ensuring a secure and stable installation. With its heavy-duty construction, this hardware kit is suitable for both residential and commercial applications, providing a space-saving solution for your interior doors.

Download PDF

Related papers

Other documents