OUTWATER SDH-SW03-SS-8-NR User manual

Brand
OUTWATER
Model
SDH-SW03-SS-8-NR
Type
User manual
BARN
DOOR
HARDWARE
THE
TOWNHOUSE
Hardware kit for sliding single wood door.
MODEL No. SDH-SW03-SS-8-NR INSTALLATION MANUAL
TOOLS REQUIRED INCLUDED IN KIT
• Plumb Line
• Pencil
• Phillips Head Screwdriver
• 10mm Drill Bit
• 5.5mm Drill Bit
• Level
• Tape Measure
• Power Drill
A
B
CDE
F G H I
J
A96" Rail x1
BDoor Roller Hardware x2
CEnd Bracket x2
DCenter Bracket x3
EST4.8x50 Bolt x5
FST5.5x32 Screw x4
GFloor Anchor x4
HNon-Routed Floor Guide x2
IDoor Stops x2
J4mm/6mm Allen Keys x1
Architectural Products by Outwater assumes no liability for improper installation.
304 Grade Stainless Steel
THE TOWNHOUSE
Wall Blocking
1. To obtain maximum weight capacity, all fasteners
must be mounted into solid wood studs or wall
blocking or mounted to a header board.
2. Adjustable mounting brackets allow for standard
16" U.S. stud spacing, or any variation.
Suggested wall bracket spacing.
Brackets must be secured into wall blocking.
Attach rail to wall as shown.
NOTES
Find the centerline of the track. Using a level, mark
a horizontal line twice the door width long. Mark the
bracket screw locations into the wall blocking.
Attach the wall portion of the brackets as shown.
Consult a structural engineer if you have questions
about what type of wall blocking is required.
Architectural Products by Outwater assumes no liability for improper installation.
Remove the anti-rise pin using the provide Allen key.
Plumb the door and fastem the metal oor guides to the
oor using the screws and anchors provided. The opening
will depend on the thickness of your door. The guides are
adjustable and will accept any thickness.
Position the doors on the rail.
1-3/16" (30mm)
THE TOWNHOUSE
Drill holes in the top of the door from the edge
as pictured to accommodate the door rollers.
Architectural Products by Outwater assumes no liability for improper installation.
Adjust the door stops accordingly. Tighten the set screw with sufcient
force to drive the set screw into the bar after making the nal adjustment.
Reattach the anti-rise pin to the door rollers
THE TOWNHOUSE
Architectural Products by Outwater assumes no liability for improper installation.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

OUTWATER SDH-SW03-SS-8-NR User manual

Brand
OUTWATER
Model
SDH-SW03-SS-8-NR
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents