BARN DOOR SDH-SW03-SS-8 Installation guide

Brand: BARN DOOR

Model: SDH-SW03-SS-8

Type: Installation guide

BARN DOOR SDH-SW03-SS-8: With its sturdy 304 Grade Stainless Steel construction, this hardware kit provides a smooth and reliable sliding mechanism for a single wood door. Designed for easy installation, it includes adjustable mounting brackets that accommodate standard 16" U.S. stud spacing or any variation, ensuring a secure fit. Whether you're looking to add a touch of rustic charm to your home or enhance the functionality of a room, this hardware kit offers a versatile solution for your sliding door needs.

BARN DOOR SDH-SW03-SS-8: With its sturdy 304 Grade Stainless Steel construction, this hardware kit provides a smooth and reliable sliding mechanism for a single wood door. Designed for easy installation, it includes adjustable mounting brackets that accommodate standard 16" U.S. stud spacing or any variation, ensuring a secure fit. Whether you're looking to add a touch of rustic charm to your home or enhance the functionality of a room, this hardware kit offers a versatile solution for your sliding door needs.

BARN

DOOR

HARDWARE

THE

TOWNHOUSE

Hardware kit for sliding single wood door.

MODEL No. SDH-SW03-SS-8 INSTALLATION MANUAL

TOOLS REQUIRED INCLUDED IN KIT

• Plumb Line

• Pencil

• Phillips Head Screwdriver

• 10mm Drill Bit

• 5.5mm Drill Bit

• Level

• Tape Measure

• Power Drill

A

B

CDE

F G H I

J

A96" Rail x1

BDoor Roller Hardware x2

CEnd Bracket x2

DCenter Bracket x3

EST4.8x50 Bolt x5

FST5.5x32 Screw x3

GFloor Anchor x3

HRouted Floor Guide x1

IDoor Stops x2

J4mm/6mm Allen Keys x1

Architectural Products by Outwater assumes no liability for improper installation.

304 Grade Stainless Steel

THE TOWNHOUSE

Wall Blocking

1. To obtain maximum weight capacity, all fasteners

must be mounted into solid wood studs or wall

blocking or mounted to a header board.

2. Adjustable mounting brackets allow for standard

16" U.S. stud spacing, or any variation.

Suggested wall bracket spacing.

Brackets must be secured into wall blocking.

Attach rail to wall as shown.

NOTES

Find the centerline of the track. Using a level, mark

a horizontal line twice the door width long. Mark the

bracket screw locations into the wall blocking.

Attach the wall portion of the brackets as shown.

Consult a structural engineer if you have questions

about what type of wall blocking is required.

Architectural Products by Outwater assumes no liability for improper installation.

Remove the anti-rise pin using the provide Allen key.

Plumb the door and mark the positions of the oor guides.

Mount the oor guides to the oor.

Position the doors on the rail.

1-3/16" (30mm)

THE TOWNHOUSE

Drill holes in the top of the door from the edge

as pictured to accommodate the door rollers.

The bottom of the doors should be routed at

this time in order to accept the oor guide.

Architectural Products by Outwater assumes no liability for improper installation.

Adjust the door stops accordingly. Tighten the set screw with sufcient

force to drive the set screw into the bar after making the nal adjustment.

Reattach the anti-rise pin to the door rollers

THE TOWNHOUSE

Architectural Products by Outwater assumes no liability for improper installation.

1
2
3
4

BARN DOOR SDH-SW03-SS-8 Installation guide

Brand: BARN DOOR

Model: SDH-SW03-SS-8

Type: Installation guide

BARN DOOR SDH-SW03-SS-8: With its sturdy 304 Grade Stainless Steel construction, this hardware kit provides a smooth and reliable sliding mechanism for a single wood door. Designed for easy installation, it includes adjustable mounting brackets that accommodate standard 16" U.S. stud spacing or any variation, ensuring a secure fit. Whether you're looking to add a touch of rustic charm to your home or enhance the functionality of a room, this hardware kit offers a versatile solution for your sliding door needs.

Download PDF

Related papers

Other documents