BARN DOOR SDH-SG02-SS Installation guide

Brand
BARN DOOR
Model
SDH-SG02-SS
Type
Installation guide

BARN DOOR SDH-SG02-SS is a hardware kit for sliding single glass door, made of 304 Grade Stainless Steel. Perfect for giving your home a modern and elegant look, it allows you to save space and add a touch of style to any room. Easy to install, it comes with all the necessary hardware, including a 78-3/4" rail, door roller hardware, end brackets, center brackets, bolts, floor guide, floor anchors, screws, door stops, and an adjustable installation wrench. The adjustable mounting brackets allow for standard 16" U.S.

BARN DOOR SDH-SG02-SS is a hardware kit for sliding single glass door, made of 304 Grade Stainless Steel. Perfect for giving your home a modern and elegant look, it allows you to save space and add a touch of style to any room. Easy to install, it comes with all the necessary hardware, including a 78-3/4" rail, door roller hardware, end brackets, center brackets, bolts, floor guide, floor anchors, screws, door stops, and an adjustable installation wrench. The adjustable mounting brackets allow for standard 16" U.S.

BARN
DOOR
HARDWARE
THE
SKYLINE
Hardware kit for sliding single glass door.
MODEL No. SDH-SG02-SS
Architectural Products by Outwater assumes no liability for improper installation.
INSTALLATION MANUAL
TOOLS REQUIRED INCLUDED IN KIT
• Plumb Line
• Pencil
• Phillips Head Screwdriver
• 8mm Drill Bit
• 5.5mm Drill Bit
• Level
• Tape Measure
• Power Drill
A
B C D E
F G H I
JK
A78-3/4" Rail x1
BDoor Roller Hardware x2
CEnd Bracket x2
DCenter Bracket x2
EST4.8x50 Bolt x4
FFloor Guide x1
GFloor Anchor x2
HST4.8x32 Screw x2
IDoor Stops x2
JAdjustable Installation Wrench x1
K4mm/8mm Allen Keys x1
304 Grade Stainless Steel
THE SKYLINE
Wall Blocking
1. To obtain maximum weight capacity, all fasteners
must be mounted into solid wood studs or wall
blocking or mounted to a header board.
2. Adjustable mounting brackets allow for standard
16" U.S. stud spacing, or any variation.
Suggested wall bracket spacing.
Brackets must be secured into wall blocking.
Attach rail to wall as shown.
NOTES
Architectural Products by Outwater assumes no liability for improper installation.
Find the centerline of the track. Using a level, mark
a horizontal line twice the door width long. Mark the
bracket screw locations into the wall blocking.
Attach the wall portion of the brackets as shown.
Consult a structural engineer if you have questions
about what type of wall blocking is required.
Remove the anti-rise pin and drill holes centered in door
thickness. Mount the rolling straps to the door.
Plumb the door and mark the positions of the oor guides.
Mount the oor guides to the oor.
Position the doors on the rail.
THE SKYLINE
Architectural Products by Outwater assumes no liability for improper installation.
Adjust the door stops accordingly. Tighten the set screw
with sufcient force to drive the set screw into the bar
after making the nal adjustment.
Reattach the anti-rise pin to the door rollers
THE SKYLINE
Architectural Products by Outwater assumes no liability for improper installation.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

BARN DOOR SDH-SG02-SS Installation guide

Brand
BARN DOOR
Model
SDH-SG02-SS
Type
Installation guide

BARN DOOR SDH-SG02-SS is a hardware kit for sliding single glass door, made of 304 Grade Stainless Steel. Perfect for giving your home a modern and elegant look, it allows you to save space and add a touch of style to any room. Easy to install, it comes with all the necessary hardware, including a 78-3/4" rail, door roller hardware, end brackets, center brackets, bolts, floor guide, floor anchors, screws, door stops, and an adjustable installation wrench. The adjustable mounting brackets allow for standard 16" U.S.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents