2. Focal Point
  3. Verve IV LED FV4LW

Focal Point Verve IV LED FV4LW Installation guide

  • Hello! I've reviewed the datasheet for the verve IV FV4LW LED wall mount from Focal Point. The document contains detailed parts lists, hanging kit specifics, and crucial information about joining multiple units. It also covers electrical connection guidelines and mounting instructions. I'm here to answer any questions you might have concerning this product or its installation.
  • What is included in the hanging kit?
    What hardware is used for joining multiple fixtures?
    What is the recommended installation order?
IS0635 REV. B 2016 ©Focal Point, LLC 4201 S. Pulaski Rd., Chicago, IL 60632 | www.focalpointlights.com 1 of 3
verve™ IV led wall mount
FV4LW
focal point key
Luminaires must be installed by a qualified electrician (check with local and national codes for proper installation).
To prevent electrical shock, disconnect electrical supply before installation or servicing.
power off
U - individUal
S - Start of rUn
i - intermediate
e - end of rUn
power on
attention
partS liStS
hanging kit
joining hardware
#8-32 dome
head Screw
(72029)
#8-32 kepS
nUt
(71012)
joiner plate
(18424)
oval head
Screw (72079)
#8-32 dome
head Screw
(72029)
canopy
(18431)
moUnting
plate
(18430)
1
4’ 4’-0”
8’ 8’-0”
12’ 4’-0” 4’-0” 4’-0”
16’ 8’-0” 8’-0” -
20’ 8’-0” 4’-0” 8’-0”
24’ 8’-0” 8’-0” 8’-0”
28’ 8’-0” 8’-0” 8’-0” 4’-0”
32’ 8’-0” 8’-0” 8’-0” 8’-0”
36’ 8’-0” 8’-0” 8’-0” 8’-0” 4’-0”
40’ 8’-0” 8’-0” 8’-0” 8’-0” 8’-0”
44’ 8’-0” 8’-0” 8’-0” 8’-0” 8’-0” 4’-0”
48’ 8’-0” 8’-0” 8’-0” 8’-0” 8’-0” 8’-0”
fixtUre
length
inStall lUminairS from left to right. note orientation of individUal/Start of rUn moUnting plate.
a B c d e f
IS0635 REV. B 2016 ©Focal Point, LLC 4201 S. Pulaski Rd., Chicago, IL 60632 | www.focalpointlights.com 2 of 3
Luminaires must be installed by a qualified electrician (check with local and national codes for proper installation).
To prevent electrical shock, disconnect electrical supply before installation or servicing.
24
3
57
6
810
12
11 13
make electrical connectionS
9
looSen lock
nUt to adjUSt
moUnting forkS
3/4”
tighten
lock nUt
4”x 4” handy Box By otherS
Contractor is responsible for adequately reinforcing walls and/or ceilings to support luminaire weight. Focal Point, LLC accepts no responsibility for inadequately reinforced walls
and/or ceilings. The information contained in this drawing is the sole property of Focal Point, LLC. Any reproduction in part or whole without the written permission of Focal Point, LLC
is prohibited.
IS0635 REV. B 2016 ©Focal Point, LLC 4201 S. Pulaski Rd., Chicago, IL 60632 | www.focalpointlights.com 3 of 3
14
DRIVER SERVICE
1
OPTIONAL DUST COVER
A B
CinStalled
flex to
inStall
/