ACTi D7xA D8xA E7xA E75 E76 E77 E8xA E88 User manual

Category
Security cameras
Type
User manual
4” Outdoor Dome Series
Hardware Manual
D71A, D72A, D81A, D82A
E71A, E72A, E73A, E74A, E75, E76, E77
E81A, E82A, E83A, E84A, E85A, E86A, E88
2016/07/13
www.acti.com
Hardware Manual
2
Table of Contents
Precautions ............................................................. 4
Safety Instructions .................................................................................... 6
Introduction ............................................................. 7
The List of Models ..................................................................................... 7
Package Contents ...................................................................................... 9
Physical Description ............................................................................... 10
Mounting Options .................................................................................... 12
Other Mounting Accessories ................................................................. 14
Installing the Camera on a Surface ..................... 15
Step 1: Drill the Holes .............................................................................. 15
Step 2: Open the Dome Cover ................................................................ 16
Step 3: Prepare for Waterproof Installation ........................................... 18
Waterproof Solution with Naked Cable ................................................. 19
Waterproof Solution with Conduit .......................................................... 21
Step 4: Install the Camera to the Surface .............................................. 25
Step 5: Connect the Cable(s) .................................................................. 26
Step 6: Access the Camera Live View .................................................... 27
Step 7: Adjust the Viewing Angle ........................................................... 27
Step 8: Close the Dome Cover ................................................................ 28
Other Connections................................................ 29
Connecting DI/DO and Audio Devices (Optional) ................................. 29
How to Connect DI/DO Devices ............................................................ 29
How to Connect Audio Devices ............................................................. 33
www.acti.com
Hardware Manual
3
Other Adjustments and Accessories .................. 34
How to Adjust the Viewing Angle ........................................................... 34
D7xA / E7x / E7xA Series ...................................................................... 34
D8xA / E8xA Series ............................................................................... 36
How to Install / Remove the Memory Card ............................................ 37
How to Insert the Memory Card ............................................................ 37
How to Remove the Memory Card ........................................................ 37
How to Replace the Dome Cover ............................................................ 38
Accessing the Camera ......................................... 41
Configure the IP Addresses .................................................................... 41
Access the Camera .................................................................................. 45
www.acti.com
Hardware Manual
4
Precautions
Read these instructions
You should read all the safety and operating instructions before using this product.
Heed all warnings
You must adhere to all the warnings on the product and in the instruction manual. Failure to follow
the safety instruction given may directly endanger people, cause damage to the system or to
other equipment.
Servicing
Do not attempt to service this video device yourself as opening or removing covers may expose
you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
Trademarks
All names used in this manual are probably registered trademarks of respective companies.
Liability
Every reasonable care has been taken during the writing of this manual. Please inform your local
office if you find any inaccuracies or omissions. We cannot be held responsible for any
typographical or technical errors and reserve the right to make changes to the product and
manuals without prior notice.
www.acti.com
Hardware Manual
5
Federal Communications Commission Statement
This equipment has been tested and found to comply with the limits for a class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifications to the equipment that are not expressly approved by the
responsible party for compliance could void the user’s authority to operate the equipment.
European Community Compliance Statement
This product has been tested and found to comply with the limits for Class B
Information Technology Equipment according to European Standard EN 55022
and EN 55024. In a domestic environment, this product may cause radio interference in which
cause the user may be required to take adequate measures.
www.acti.com
Hardware Manual
6
Safety Instructions
Cleaning
Disconnect this video product from the power supply before cleaning.
Attachments
Do not use attachments not recommended by the video product manufacturer as they may cause
hazards.
Do not use accessories not recommended by the manufacturer
Install the PoE switch or injector and other devices that will be used with the camera in a dry
place protected from weather.
Servicing
Do not attempt to service this video product yourself. Refer all servicing to qualified service
personnel.
Damage Requiring service
Disconnect this video product from the power supply immediately and refer servicing to qualified
service personnel under the following conditions.
1) When the power-supply cord or plug is damaged
2) If liquid has been spilled, or objects have fallen into the video product.
3) If the inner parts of video product have been directly exposed to rain or water.
4) If the video product does not operate normally by following the operating Instructions in this
manual. Adjust only those controls that are covered by the instruction manual, as an improper
adjustment of other controls may result in damage, and will often require extensive work by a
qualified technician to restore the video product to its normal operation.
Safety Check
Upon completion of any service or repairs to this video product, ask the service technician to
perform safety checks to determine if the video product is in proper operating condition.
www.acti.com
Hardware Manual
7
Introduction
The List of Models
This hardware manual contains the following models:
D71A
1MP Outdoor Dome with D/N, IR, Fixed lens
D72A
3MP Outdoor Dome with D/N, IR, Fixed lens
D81A
1MP Outdoor Dome with D/N, IR, Vari-focal lens
D82A
3MP Outdoor Dome with D/N, IR, Vari-focal lens
E71A
1MP Outdoor Dome with D/N, IR, Basic WDR, Fixed lens
E72A
3MP Outdoor Dome with D/N, IR, Basic WDR, Fixed lens
E73A
5MP Outdoor Dome with D/N, IR, Basic WDR, Fixed lens
E74A
3MP Outdoor Dome with D/N, IR, Superior WDR, Fixed lens
E75
1.3MP Outdoor Dome with D/N, IR, Basic WDR, SLLS, Fixed lens
E76
2MP Outdoor Dome with D/N, IR, Basic WDR, SLLS, Fixed lens
E77
10MP Outdoor Dome with D/N, IR, Basic WDR, Fixed lens
E81A
1MP Outdoor Dome with D/N, IR, Basic WDR, Vari-focal lens
E82A
3MP Outdoor Dome with D/N, IR, Basic WDR, Vari-focal lens
E83A
5MP Outdoor Dome with D/N, IR, Basic WDR, Vari-focal lens
E84A
2MP Outdoor Dome with D/N, IR, Basic WDR, SLLS, Vari-focal lens
E85A
1MP Outdoor Dome with D/N, IR, Superior WDR, Vari-focal lens
www.acti.com
Hardware Manual
8
E86A
3MP Outdoor Dome with D/N, IR, Superior WDR, Vari-focal lens
E88
1.3MP Outdoor Dome with D/N, IR, Basic WDR, SLLS, Vari-focal lens
From the installation perspective, these models are similar; therefore, one manual is used for all
of them.
www.acti.com
Hardware Manual
9
Package Contents
Camera
Mounting Screw Kit
Hexagon Screwdriver
Drill Template
Conduit Gland
Cable Gland
Lens Focus Tuner
(for D7xA / E7xA /
E75 / E76 only)
Terminal Block
(for Audio and DI/DO)
Quick Installation Guide
Warranty Card
Drill Template
www.acti.com
Hardware Manual
10
Physical Description
NOTE: The camera picture above is for reference only. Actual camera may slightly differ.
1) Ethernet Port
Connects to a network using an Ethernet cable.
2) Memory Card Slot
Insert a memory card (not included) into this slot for local recording purposes. See How to
Install / Remove the Memory Card on page 37 for more information.
NOTE: Supports microSDHC and microSDXC cards.
3) Reset Button
The purpose of the reset button is to restore the factory default settings of the camera,
including the administrator’s password.
When to use the reset button?
1. The administrator’s password has been forgotten and therefore the camera cannot be
accessed.
2. In case of IP address, mask, or allow/deny filter related issues, resulting with inability to
modify these settings.
3. In case of connectivity issues or abnormal video quality.
How to do the reset?
Press and hold the reset button for 5 seconds.
www.acti.com
Hardware Manual
11
4) Digital Input / Output (DI/DO) and Audio Input / Output
This connector connects to digital input or output devices, such as an alarm trigger, panic
button, etc., as well as audio input and output devices, such as microphones and speakers.
Digital Input (DI) and Digital Output (DO) devices are used in applications like motion
detection, event triggering, alarm notifications, etc. See Connecting DI/DO and Audio
Devices (Optional) on page 29 for more information.
www.acti.com
Hardware Manual
12
Mounting Options
There are several mounting options that you can use to install the camera. Select the most
suitable solution for your installation environment.
Accessories
Suitable when mounting the camera directly walls or ceilings
without extra accessories. See Installing the Camera on a
Surface on page 15 for mounting instructions.
Suitable when mounting the camera discretely above dropped
ceilings wherein only the dome cover will be visible underneath
the ceiling.
PMAX-1003
Suitable when mounting the camera on hard and high ceilings.
PMAX-0101 PMAX-0103 (Straight Tube with Bracket)
PMAX-0101 PMAX-0102 (Straight Tube)
www.acti.com
Hardware Manual
13
Suitable when mounting the camera on straight walls.
PMAX-0314 (Heavy Duty Wall Mount)
Vertical Pole
Mount
Suitable when mounting the camera on vertical poles.
PMAX-0314 PMAX-0503
Horizontal
Pole Mount
Suitable when mounting the camera on horizontal poles.
PMAX-0101 PMAX-0102 PMAX-0503
Corner
Mount
Suitable when mounting the camera on a corner wall.
PMAX-0314 PMAX-0402
www.acti.com
Hardware Manual
14
Other Mounting Accessories
Accessories
PMAX-0104 (Extension Tube)
PMAX- 0702 (Junction Box)
NOTE:
For more information about the mounting solutions and accessories, please check the
Mounting Accessory Selector in our website (http://www.acti.com/mountingselector).
The above mounting accessories are not included in the package. Contact your sales
agents to purchase.
www.acti.com
Hardware Manual
15
Installing the Camera on a Surface
This section describes the procedures in installing the camera on a flat surface such as a hard or
dropped ceiling and straight or tilted walls. Before installation, make sure the wall or ceiling can
bear more than the weight of the camera.
Step 1: Drill the Holes
Before drilling the holes, note the direction of the connectors side of the camera, which is also the
opposite side of the camera logo. This influences the camera placement and where you should
drill the hole where the cables will pass through or how the cables will go along the ceiling or wall.
1. According to the preferred camera orientation, mark the screw holes location on the surface.
2. Determine how the cables will be routed: pass through the surface or along the surface.
If the cables will pass through the surface, drill the cable hole and the three (3)
screw holes on the surface.
If the cables will be routed along the surface, just drill the three (3) screw
holes on the surface.
3. Insert the plastic plugs into the screw holes, if necessary.
www.acti.com
Hardware Manual
16
Step 2: Open the Dome Cover
NOTE: To avoid scratches or leaving fingerprints on the dome cover, it is recommended to retain
the plastic covering the dome cover until the camera is completely installed. However, the plastic
has been removed on the pictures in this documentation to show clarity of the procedures being
described.
1. If the cables will pass through the surface, remove the metal cap covering the bottom conduit
hole of the camera, and attach the cap to the side hole to close it. The cable(s) will be routed
to pass this hole from the surface.
2. Loosen the three (3) screws securing the dome cover.
www.acti.com
Hardware Manual
17
3. Carefully lift to open the dome cover and place it on the side of the camera.
NOTE: Do not abruptly lift the dome cover; it is attached to the camera with a spring wire.
4. If necessary, insert a memory card with the metallic contacts facing down into the card slot of
the camera.
www.acti.com
Hardware Manual
18
Step 3: Prepare for Waterproof Installation
The camera comes with two (2) glands used for waterproof installation:
Cable Gland: For use with an Exterior-grade Ethernet cable. Exterior-grade Ethernet
cables are already waterproof. See Waterproof Solution with Naked Cable on page
19.
Conduit Gland: For use with a flexible conduit. This solution is recommended when an
exterior-grade Ethernet cable is not available or when other cable connections, like audio
input, DC 12V power, etc. will be connected to the camera. See Waterproof Solution
with Conduit on page 21.
Determine the type of waterproof solution that is applicable to your installation requirements and
prepare the necessary accessories or purchase extra materials.
Cable Gland
Conduit Gland
For use with an Exterior-grade Ethernet
cable (not included in the package).
For use with 1/2” flexible conduit (not
included in the package)
www.acti.com
Hardware Manual
19
Waterproof Solution with Naked Cable
This section describes the procedures in using the bundled cable gland and an exterior-grade
Ethernet cable.
1. Disassemble the cable gland as shown below:
2. Insert the clamping nut into the Ethernet cable.
3. Insert the sealing insert with claw.
Body
(with Washer)
Sealing Insert
with Claw
Clamping
Nut
www.acti.com
Hardware Manual
20
4. Attach the cable gland body to the hole of the camera.
Attach to Camera Side Hole Attach to Camera Bottom Hole
5. If the cable will be routed along the surface, skip this step.
If the cable will pass through the surface, do the following:
a. Pull the network cable through the bottom conduit hole.
b. Insert the sealing insert with claw into the cable gland body and then attach the clamping
nut to complete the cable solution.
NOTE: Make sure the clamping nut is tightly attached to the cable gland body and the sealing
insert is squeezed tightly.
6. Proceed with Step 4: Install the Camera to the Surface on page 25.
or
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47

ACTi D7xA D8xA E7xA E75 E76 E77 E8xA E88 User manual

Category
Security cameras
Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI