2. KC HiLiTES
  3. 9801

KC HiLiTES 9801 Installation guide

  • I have analyzed the provided user guide for the 28" Rear Chase LED Light Bar model 9801. This document details the parts included, tools needed, and wiring instructions which includes various light functions such as white center lights, amber lights, red brake lights and dim red tail lights. I am ready to answer your questions about the light bar and its installation.
  • How do I power the LED light bar?
    What does the white wire control?
    What happens if both the brown and green wires are powered on?
To power this unit, connect the Red Wire 12V (+) to the Positive post of the vehicle’s battery.
Connect the Black Wire (-) to the Negative post of the battery.
1.
In order to achieve the desired pre-programmed functions of this LED light bar, please note
the Wire Color / Function list below.
2.
Red: 12V (+) Power
Black: (-) Ground
White: White Lights (Center both) 12V (+)
Green: Amber Lights (both)12V (+)
Blue: Right Red Brake (outer) 12V (+)
Yellow: Left Red Brake (outer) 12V (+)
Gray: Dim Red Tail (both outer) 12V (+)
Brown: Flashing Amber (both) 12V (+); Note: if Brown and Green wires are both connected to 12V (+) and
powered on at the same time, Green function will override Brown.
Note: “L” shape mounting bracket (pr) sold separately; Item # 9800.
28” REAR CHASE LED LIGHT BAR
#9801
Tools Needed:
KC HiLiTES, Inc. P.O. Box 155 Williams, AZ 86046 www.kchilites.com Copyright 2017 Rev 20170410 - KC3265EO
Thank you for purchasing KC HiLiTES products; your satisfaction is very important to us. If you have any
questions regarding this product or any other KC HiLiTES products, please contact us at (888) 689-5955 or
visit kchilites.com.
(1) 28” Rear Chase LED Bar
Parts Included:
(4) 1/4”-20 x 1/2” Hex Bolt
(4) 1/4” Flat Washer
7/16” Wrench or Socket
(4) 1/4”-20 Nut
Wiring Tools
WIRING:
/