2. KC HiLiTES
  3. 4401

KC HiLiTES 4401 Installation guide

  • Hello! I've reviewed the Lens instruction document. This document provides clear steps on how to remove and replace the lens of your KC HiLiTES product. It mentions to locate three slots, use flat head screwdriver and put new lens by pressing firmly with equal pressure. I'm here to answer any questions you might have about the lens replacement process described in this document.
  • How many opening slots should I locate?
    What tool is required to remove the lens?
    What should I do after removing the lens?
3. Release and remove lens
4. Press down rmly with equal pressure
around the light to snap in new lens.
(There should be no gaps between lens
and light).
1. Locate the three opening slots. 2. Insert at head screwdriver and with slight
pressure twist the screwdriver.
1
INSTRUCTIONs TO remove LENS
PRODUCT REGISTRATION
Thank you for becoming part of the KC family and purchasing one of our premium KC products! With
over 50 years of history in the auxiliary lighting market, you have become a part of our ever growing
family, and we encourage you to register your product online at HTTP://REGISTER.KCHILITES.COM
to ensure you get all the benets of owning a KC HILITES product.
KC HiLiTES Inc. Williams, AZ / Gardena, CA USA | 888-689-5955 | www.kchilites.com | Rev (06242021)
/