2. Ghent
  3. PNT1PN7736BLKCAS

Ghent PNT1PN7736BLKCAS, PNT1PM7736BLKCAS, PNT1UM7736BLKWH, PNT1UN7736BLKWH, Pointe Mobile Glassboard Installation guide

  • Hello, I have reviewed the installation instructions for the Pointe Mobile Board PNT. This document provides step-by-step instructions for assembling the mobile board, including attaching the feet, casters, and using the provided hardware for assembly and for connecting units. I'm ready to answer your questions about the setup and features of this product.
  • What is included in the package?
    What is the first step in assembling the board?
    What is the optional step 6 for?
(1)
5/32" Hex
Wrench
Pointe Mobile Board / PNT
Installation Instructions
www.ghent.com/install - Lebanon, Ohio 800-543-0550
IS-PNT 07/21
Step 1:
Remove and unpack the Panel, Feet, Casters, and Hardware.
Step 2:
Lay the Panel on a flat surface.
(1)
Panel
(2)
Feet
(4)
Casters
(4)
1/4"-20 x 3/4"
Flat Head Cap Screw
(2)
#10-24 x 5/8"
Thumb Screw
(1)
Connector Plate
Step 3:
Slide the Feet into the bottom of the frame. Secure the feet to the frame using the
Flat Head Cap Screws. Tighten on the side of the Frame using the provided Hex Wrench.
www.ghent.com/install - Lebanon, Ohio 800-543-0550
IS-PNT 07/21
Step 7:
Recycle all packaging in accordance with local regulations.
Step 5:
Carefully stand Pointe Mobile Board upright.
Step 4:
Attach the Casters to the bottom of the feet.
Step 6:
(Optional) Use provided connector plate and thumb screws when connecting Pointe units to
create a partition.
/