Ghent STG3M5460SILWHFL001 Installation guide

Brand
Ghent
Model
STG3M5460SILWHFL001
Type
Installation guide
(2)
Top Cap
(0 - 2)
Divider Rail
(1)
Stroll T-Base
Partition
(2)
#10-32 Pan
Head Screw
(Optional 1)
Quad Connector
(Optional 6-8)
#10-32 Flat
Head Screw
(1)
1/8" Hex
Wrench
(2)
Angle Connector
(Optional 1)
Tri Connector
(1)
Connector
Ground Connector
Non-slip tape
T-Base fully seated
in Connector
Pan Head Screw
Sroll T-Base Glass Partition / STGXXXX
Product Installation Instructions
www.ghent.com/install - Lebanon, Ohio 800-543-0550 IS-STG 3/21
Step 1:
Remove and unpack the Stroll T-Base unit,
Ground Connector, and Hardware.
Step 3:
Carefully roll the Stroll T-Base unit onto the Connector as shown. Please note for safe use
the Stroll T-Base unit should always be docked in the Connector when in use.
Step 4:
(Optional) Create a partition wall
by attaching two Ground Connectors
together with the Pan Head Screws.
Step 2:
After selecting a location for the Stroll T-Base partition place the Connector onto the ground in
front of the single wheel side. Align the Connector as shown.
Stroll T-Base
Partition
(1)
Quad Connector
Accessory
(6-8)
#10-32 Flat
Head Screw
(1)
1/8" Hex
Wrench
(1)
Tri Connector
Accessory
Connector
T-Base fully seated in
assembled Connector
Flat Head Screw
Connector
Tri Connector Accessory
Flat Head Screw
Connector
Quad Connector Accessory
Sroll T-Base Glass Partition / STG-CONN-XXX
Accessory Installation Instructions
www.ghent.com/install - Lebanon, Ohio 800-543-0550
IS-STG-CONN 3/21
Step 1:
Remove and unpack the Stroll T-Base unit,
Ground Connector, and Hardware.
Step 3:
Place the assembled Connector onto the ground. Then carefully dock the Stroll T-Base unit onto
the assembled Tri or Quad Connector as shown. Please note for safe use the Stroll T-Base unit should
always be docked in the Connector when in use.
Step 2:
Using two Flat Head Screws install one Connector onto the Connector Accessory as shown.
Repeat this step until all Connectors are attached.
  • Page 1 1
  • Page 2 2

Ghent STG3M5460SILWHFL001 Installation guide

Brand
Ghent
Model
STG3M5460SILWHFL001
Type
Installation guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents