Boston Whaler 130 Super Sport Tackle Storage Organizer Installation guide

Boston Whaler
Brand
Boston Whaler
Model
130 Super Sport Tackle Storage Organizer
Type
Installation guide
ACCESSORY INSTALLATION
INSTRUCTIONS
TACKLE STORAGE & STORAGE ORGANIZER
Installation Instructions for the 130 & 150 Super Sport
Issue Date
12/16/2008
Rev:A
PROCEDURE NO. AI-MS-009
1. PURPOSE
Provide step-by-step procedure for the tackle
storage & storage organizer installation.
2. SCOPE
This procedure is limited to the tackle storage & storage organizer installation on the
130 &150 Super Sport.
3. DEFINITION
3.1. Not Applicable
4. RESPONSIBILITY
4.1. Only those personnel qualified/trained to install the tackle storage & storage
organizer on the 130 &150 Super Sport.
5. TOOLS/EQUIPMENT REQUIRED
5.1. Drill
- Phillips head bit #2
- 5/32” drill bit w/countersink
5.2. Marine Sealant
5.3. Measuring Tape
5.4. Pencil
5.5. Hardware Pkg (supplied)
6. SAFETY
6.1. Safety glasses or goggles are recommended.
7. FORMS
7.1. Not applicable
CONTENTS OF KIT PART #
1- TACKLE BOX.............................................1948066
2- STORAGE ORGANIZER ...........................1948203
HARDWARE PKG.......................... 901BWSTORAGE
901BWTACKLE
Page 1 of 3
1
2
ACCESSORY INSTALLATION
INSTRUCTIONS
TACKLE STORAGE & STORAGE ORGANIZER
Installation Instructions for the 130 & 150 Super Sport
Issue Date
12/16/2008
Rev:A
PROCEDURE NO. AI-MS-009
8. PROCEDURE
8.1. Measure inboard from the portside seat support.
8.1.1. Using the pencil, mark the deck (refer to chart).
NOTICE
8.2. Slide the unit under the bench seat and align the
lower, rear portside “foot” with the mark made in the
previous step.
NOTICE
Assure that the back of the unit is in line
(flush) with the back of the seat.
8.3. When the unit is satisfactorily aligned, using the drill,
lightly score the deck through the predrilled holes in each
of the four (4) corner “feet”.
130SS...............................................15”
150SS...............................................19 ¼”
Page 2 of 3
ACCESSORY INSTALLATION
INSTRUCTIONS
TACKLE STORAGE & STORAGE ORGANIZER
Installation Instructions for the 130 & 150 Super Sport
Issue Date
12/16/2008
Rev:A
PROCEDURE NO. AI-MS-009
8.4. Slide the unit out of the way and using the drill with 5/32” bit,
drill and slightly countersink at each of the marks
made in the previous step.
NOTICE
Assure that the countersink is wider than the
screw threads to prevent gelcoat cracks.
8.5. Apply marine sealant to each of the holes drilled in
the previous step.
8.6. Align the unit with the screw holes made in step 8.4 and
secure each “foot” using a #10 x 1.5” Phillips truss head
screw (supplied).
NOTICE
Extra hardware is provided. DO NOT USE
DAMAGED OR DEFORMED HARDWARE.
Tackle Storage & Organizer Installation Is Complete
Page 3 of 3
  • Page 1 1
  • Page 2 2
  • Page 3 3

Boston Whaler 130 Super Sport Tackle Storage Organizer Installation guide

Boston Whaler
Brand
Boston Whaler
Model
130 Super Sport Tackle Storage Organizer
Type
Installation guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents