2. instructables
  3. Super Mini Organizer
Super Mini Organizer

instructables Super Mini Organizer User guide

  • Hello! I've reviewed the instructions for creating the Super Mini organizer. This guide walks you through making a handy cardboard organizer step by step, perfect for holding screwdriver bits. I can answer your questions about the construction process and materials needed.
  • What is this organizer designed for?
    What materials are needed?
    How to make a latch?
instructables
Super Mini Organizer
by Computer Kid
Hi i'm Cameron. In this instructable I will show you how to make a super handy organizer. It is perfect for organizing
screwdriver bits.
Super Mini Organizer: Page 1
Step 1: Make the Box
I can't type the measurements so could you look at the picture? Thanks!
Super Mini Organizer: Page 2
Step 2: Cut Out the Slots
Measure or guess the height and width and length of the box. Cut out three rectangles of cardboard for the width and
length and half the height of the box, then on both sets cut three evenly spaced slits.
Super Mini Organizer: Page 3
Super Mini Organizer: Page 4
Step 3: Fold the Box
Follow the images.
Super Mini Organizer: Page 5
Super Mini Organizer: Page 6
Super Mini Organizer: Page 7
Super Mini Organizer: Page 8
Super Mini Organizer: Page 9
Step 4: Add a Latch
You must add a latch if you want it to stay shut. To add a latch, poke a hole in the front and on the bottom of the box.
Now you can run a paper clip through both holes and there you go you have a latch!
Super Mini Organizer: Page 10
Super Mini Organizer: Page 11
Super Mini Organizer: Page 12
Step 5: Put in the Rectangles
Put in the rectangles with slots in them (make sure they're lined up correctly;-).
Super Mini Organizer: Page 13
Step 6: All Done!!!!!(-;(-:
you're all done! stu it to the max, or just a little(-;
Super Mini Organizer: Page 14
That's a awesome idea for an organizer.
Nice organizer :)
Super Mini Organizer: Page 15
/