Assembly Instructions: 2635-6 (Amari)
IMPORTANT:
• ALL INSTALLATION WORK SHOULD BE DONE BY ACCREDITED PROFESSIONAL.
• SHUT OFF POWER SUPPLY AT FUSE OR CIRCUIT BREAKER!
• USE ONLY THE SPECIFIED BULBS. DO NOT EXCEED THE MAXIMUM WATTAGE!
PREPARING FOR INSTALLATION
Remove all of the contents from the carton. See the important
notes above. Shut off the power at the circuit breaker and
completelyremovetheoldxturefromtheceiling,includingthe
oldmountingstrap.
1.Mountingstrap(B)containsseveralpairsofthreadedholesand
twoofmountingscrews(D).Youmayneedtotightenhexnuts(C)
that hold the screws in place.
2.Placemountingstrap(B)uptoyourjunctionbox.Totestproper
placement,haveanassistantsupportthexture’sweightand
placecanopy(F)overthemountingstrap.Testwhethermounting
screws(A)lineupwiththeholesincanopy(F).Placethexture
andcanopyasideandsecuremountingstrap(B)tothejunction
boxwithmountingscrews(D)andascrewdriver.Tightenthe
screws securely.
3.Therearefoursteelcablewires(K)whichrunfromthexture’s
frame(P)upthroughholesincanopy(F).Bymeasuring,determine
thecorrectlengthofsteelcablewires(K)neededforproper
hangingheight.Toshortenthexture,depressbutton(H)andpull
theexcesscablewires(K)upthroughcanopy(F).Tolengthen
cablewires(K),pressdownonbutton(H)andpulldown.Adjust
thecablesuntilthextureislevel.Adjustthelengthofthexture’s
electricalwire(I)tomatchthehangingheightbylooseningset
screw(J)andpullingthewirethroughcanopy(F).Whenthe
desiredheightisreached,tightensetscrew(J).
CLEANING TIPS
Treat the xture gently! Regular cleaning will reduce the need for deep cleaning. For regular cleaning, turn off the light and wipe down the
xture with a clean lint-free cotton or microber cloth. Never spray cleaner directly onto the xture.
For Customer Service, contact
the place of purchase to arrange
for replacement parts.
House Wires
Fixture Wires
Hot
How to Identify the Fixture’s Wires
Hot Neutral Ground
Smooth
Ribbed
Bare Metal,
Green, or
Green Inner
Thread
Black
White
Black Inner
Thread
White Inner
Thread
FINISHING THE INSTALLATION
5.Raisecanopy(F)totheceiling.Positionthecanopysothatmountingscrews(A)protrudethroughtheopeningsofcanopy(F).
Securecanopy(F)tomountingstrap(B)withdecorativenuts(G).
6.Carefullyplaceglassdiffusers(L)intotheopeningsonframe(P).Slidespacers(M)ontoscrews(N)andlocktheglassdiffusers(L)
intoplaceusingdecorativenuts(G2).
7.Twistlightbulbs(notprovided)intosockets(O).Donotexceedthemaximumrecommendedwattage.
Yourinstallationiscomplete.Turnonthepowerandtestthexture.
CONNECTING THE WIRES
4.Haveanassistantsupportthextureweightwhilecompletingthe
wiring.Cutawayexcesswire.Attachthexture’swirestothepower
supplywiresfromthejunctionbox.Connectblacktoblack(orsmooth);
whitetowhite(orribbed);groundtoground(greenorcopper).Twistthe
endsofthewirepairstogether,thentwistonawireconnector.Makesure
alltwistsareinthesamedirection.Ifthereisnogroundwire(greenor
copper)fromthejunctionbox,locategroundscrew(E)onmountingstrap
(B)andwrapthexture’sgroundwirearoundthegreengroundscrew(E).
Useascrewdrivertosecuregroundscrew(E)ontothemountingbracket.
Tuckallwiresneatlyintothejunctionbox.
G
N
D
A
E
D
B
C
G2
G
O
H
J
L
F
K
I
N
M
P