2. Golden Lighting
  3. 270MPCH

Golden Lighting 270MPCH Installation guide

  • Hello! I've reviewed the assembly instructions for the GOLDEN LIGHTING 1270-11/13 light fixture. This document outlines the installation process, focusing on safety and proper wiring techniques. It also provides details on connecting wires, and completing the installation. I'm ready to answer any questions you have about this process and the fixture described.
  • Who should perform the installation?
    What should be done before starting installation?
    What type of bulbs should be used?
    How to connect wires?
Assembly Instructions: 1270-11/13 (Multi-Family)
IMPORTANT:
• ALL INSTALLATION WORK SHOULD BE DONE BY ACCREDITED PROFESSIONAL.
• SHUT OFF POWER SUPPLY AT FUSE OR CIRCUIT BREAKER!
• USE ONLY THE SPECIFIED BULBS. DO NOT EXCEED THE MAXIMUM WATTAGE!
PREPARING FOR INSTALLATION
Please see the important notes above.
1.Removeallofthecontentsfromthecarton.Removetheoldxturefromtheceiling,includingtheoldmountingstrap.
2.Removethemountingstrapassemblyfromthepartsbag.(Mountingstrap(A)shouldhavemountingscrews(B)attached.You
mayneedtotightennuts(C)ontothescrews.)
3.Placemountingstrap(A)overthejunctionboxsothatmountingscrews(B)arepointingdownwiththethreadsofthescrewsat
the bottom.
4.Securemountingstrap(A)tothejunctionboxwithmountingscrews(D)andascrewdriver.
For Customer Service, please
contact the place of purchase.
CLEANING TIPS
Treat the xture gently! Regular cleaning will reduce the need for deep cleaning. For regular cleaning, turn off the light and wipe
down the xture with a clean lint-free cotton or microber cloth. Never spray cleaner directly onto the xture.
House Wires
Fixture Wires
Hot
How to Identify the Fixture’s Wires
Hot Neutral Ground
Smooth Ribbed Bare Metal,
Green, or
Green Inner
Thread
Black White
Black Inner
Thread
White Inner
Thread
JUNCTION
BOX
A
B
D
C
F
G
H
E
FINISHING THE INSTALLATION
7.Raiseceilingpan(G)totheceilingandpositionmountingscrews
(B)throughtheopeningsofceilingpan(G).
8.Secureceilingpan(G)intoplacebytwistingdeconuts(F)ontothe
exposedthreadsofmojntingscrews(B).
9.Installthelightbulbs.(Note:Donotexceedtherecommended
wattage.)
10.Gentlypushglassshade(H)uptoceilingpan(G)andtwistthe
glasscounterclockwisetolocktheglassinplace.
Yourinstallationisnowcomplete.Turnonthepowerandtestthexture.
CONNECTING THE WIRES
(Note:Youmayneedanassistanttohelpholdtheceilingpanwhile
completingthewiring.)
5.Attachthepowersupplywiresfromthejunctionboxtothe
xture’swires.Putblacktoblack(orsmooth);whitetowhite(or
ribbed);groundtoground(greenorcopper).Puttheendsofthe
wirepairstogether,thentwistonawireconnector.Makesureall
twistsareinthesamedirection.
(Ifthereisnogroundwire(greenorcopper)fromthejunctionbox,
locategroundscrewonmountingstrap(A)andwrapthexture
groundwirearoundgreengroundscrew(E).Useascrewdriverto
securegroundscrew(E)ontothemountingbracket.)
6.Tuckallwiresneatlyintothejunctionbox.
/