2. Golden Lighting
  3. 2243-SF BLK-MWS
2243-SF BLK-MWS

Golden Lighting 2243-SF BLK-MWS, 8314-SF NB Installation guide

  • Hello, I've reviewed the Assembly Instructions for the GOLDEN LIGHTING 8314-SF light fixture. The document provides detailed steps for installation including wiring and mounting to the ceiling. It also includes cleaning tips to help maintain the fixture. I'm ready to assist with any questions you may have about installing or using this light fixture.
  • Who should perform the installation work?
    What should be done before starting installation?
    What type of bulbs should be used?
    How to clean the fixture?
Assembly Instructions: 8314-SF (Suzette)
IMPORTANT:
• ALL INSTALLATION WORK SHOULD BE DONE BY ACCREDITED PROFESSIONAL.
• SHUT OFF POWER SUPPLY AT FUSE OR CIRCUIT BREAKER!
• USE ONLY THE SPECIFIED BULBS. DO NOT EXCEED THE MAXIMUM WATTAGE!
PREPARING FOR INSTALLATION
Remove all of the contents from the carton. See the
important notes above. Shut off the power at the circuit
breakerandcompletelyremovetheoldxturefromthe
ceiling, including the old mounting strap.
1. Mounting strap (B) contains several pairs of threaded
holes. Find the pair of holes that matches the spacing of
theholesonthejunctionboxandyourxture’scanopy.
Test canopy (G) on mounting strap (B) to ensure that the
canopy will hang straight with enough of the threads
ofmountingscrews(A)exposedfordeconuts(F)tot
securely.Placethextureaside.Pullthehousewires
through the center of mounting strap (B).
2.Placemountingstrap(B)overthejunctionboxsothat
mounting screws (D) may be inserted. Secure mounting
strap(B)tothejunctionboxwithmountingscrews(D)
and a screwdriver. Tighten the screws securely.
CLEANING TIPS
Treat the xture gently! Regular cleaning will reduce the need for deep cleaning. For regular cleaning, turn off the light and
wipe down the xture with a clean lint-free cotton or microber cloth. Never spray cleaner directly onto the xture.
For Customer Service, please
contact the place of purchase.
House Wires
Fixture Wires
Hot
How to Identify the Fixture’s Wires
Hot Neutral Ground
Smooth Ribbed Bare Metal,
Green, or
Green Inner
Thread
Black White
Black Inner
Thread
White Inner
Thread
CONNECTING THE WIRES
3.Haveanassistantsupportthexture’sweightwhilecompletingthewiring.Cutawayexcesswire.Pullthexture’swiresthroughthe
canopy.Attachthexture’swirestothepowersupplywiresfromthejunctionbox.Connectblacktoblack(orsmooth);whitetowhite
(orribbed);groundtoground(greenorcopper).Twisttheendsofthewirepairstogether,andthentwistonawireconnector.Makesure
alltwistsareinthesamedirection.Ifthereisnogroundwire(greenorcopper)comingfromthejunctionbox,locategroundscrew(E)on
mountingstrap(A)andwrapthexture’sgroundwirearoundthegreengroundscrew(E).Useascrewdrivertosecuregroundscrew(E)
ontothemountingbracket.Tuckallwiresneatlyintothejunctionbox.
FINISHING THE INSTALLATION
4. Push canopy (G) up to the ceiling over mounting strap (B) so that mounting screws (A) protrude through the holes in the canopy.
Tightlythreaddecorativenuts(F)ontotheexposedthreadsofmountingscrews(A)tosecurecanopy(G)inplace.
5. Carefully slide candle sleeves (H) over sockets (I).
6.Installbulbs(notprovided)inaccordancewiththexture’sspecications.Donotexceedthemaximumwattage.
Yourinstallationisnowcomplete.Turnonthepowerandtestthexture.
I
GND
A
E
D
B
C
F
G
H
/