BARN DOOR HARDWARE SDH-SW4-BLK-8 Installation guide

Brand: BARN DOOR HARDWARE

Model: SDH-SW4-BLK-8

Type: Installation guide

BARN DOOR HARDWARE SDH-SW4-BLK-8: With this sliding door hardware kit, you can effortlessly transform your ordinary doors into stylish space-saving barn doors. The heavy-duty steel construction ensures durability and can support doors weighing up to 250 lbs, making it ideal for both interior and exterior use. The adjustable anti-jump disks and door stops provide enhanced safety and security, preventing accidental derailment and ensuring smooth operation.

BARN DOOR HARDWARE SDH-SW4-BLK-8: With this sliding door hardware kit, you can effortlessly transform your ordinary doors into stylish space-saving barn doors. The heavy-duty steel construction ensures durability and can support doors weighing up to 250 lbs, making it ideal for both interior and exterior use. The adjustable anti-jump disks and door stops provide enhanced safety and security, preventing accidental derailment and ensuring smooth operation.

BARN

DOOR

HARDWARE

CLASSIC

STRAP

Hardware kit for sliding single wood door.

MODEL No. SDH-SW4-BLK-8 INSTALLATION MANUAL

TOOLS REQUIRED INCLUDED IN KIT

• Plumb Line

• Pencil

• Phillips Head Screwdriver

• 8mm Drill Bit

• 10mm Routing Drill Bit

• Wrench

• Level

• Tape Measure

• Power Drill

A

B

C

D

E

F

G H I

J K L

ADoor Roller Hardware x2

B96" Rail x1

CWall Bracket x6

D2.5mm Allen Key x1

EDoor Stop x2

FAnti-Jump Disk x2

GRouted Floor Guide x1

HFloor Anchor x2

IST4.2x25 Screw x2

JM8x30 Wall Anchor x6

KM8x60 Bolt + Washer x6

LM8x90 Bolt x6

Architectural Products by Outwater assumes no liability for improper installation.

CLASSIC STRAP

Wall Blocking

To obtain maximum weight capacity, all fasteners

must be mounted into solid wood studs or wall

blocking or mounted to a header board.

Minimum door overlap on guide is 4-3/4"

Find the centerline of the track. Using a level, mark a horizontal

line twice the door width long. Mark the bracket screw locations

into the wall blocking. Attach the wall portion of the brackets

as shown.

Attach the rail to the wall brackets using a wrench to

fasten the bolts as shown.

NOTES

Architectural Products by Outwater assumes no liability for improper installation.

Consult a structural engineer if you have questions

about what type of wall blocking is required.

Suggested wall bracket spacing. Brackets must be secured into wall blocking.

Drill out holes in the door using a 10mm routing drill bit as

pictured. The bottom of the door should be routed at this

time in order to accept the oor guide.

Attach the doors to the rails making sure that the

anti-jump disks are engaged to avoid a serious accident.

Plumb the door and mark the positions of the oor guides.

Mount the oor guides to the oor.

Attach the anti-jump disks to the tops of the door.

CLASSIC STRAP

Architectural Products by Outwater assumes no liability for improper installation.

Architectural Products by Outwater assumes no liability for improper installation.

CLASSIC STRAP

Adjust the door stops accordingly using the provided 2.5mm Allen key.

1
2
3
4

BARN DOOR HARDWARE SDH-SW4-BLK-8 Installation guide

Brand: BARN DOOR HARDWARE

Model: SDH-SW4-BLK-8

Type: Installation guide

BARN DOOR HARDWARE SDH-SW4-BLK-8: With this sliding door hardware kit, you can effortlessly transform your ordinary doors into stylish space-saving barn doors. The heavy-duty steel construction ensures durability and can support doors weighing up to 250 lbs, making it ideal for both interior and exterior use. The adjustable anti-jump disks and door stops provide enhanced safety and security, preventing accidental derailment and ensuring smooth operation.

Download PDF

Related papers

Other documents