Panasonic ET-PKD510S Datasheet

Panasonic
Brand
Panasonic
Model
ET-PKD510S
Category
Projector mounts
Type
Datasheet

Panasonic ET-PKD510S is a ceiling mount bracket designed for low ceilings, compatible with Panasonic projectors such as PT-DZ21K/DS20K/DW17K. It allows for vertical correction of +5° and horizontal slant correction of ±2.5°. The dimensions are 350.5 × 105.5 × 535 mm (13-13/16 × 4-5/32 × 21-1/16 inches) and it weighs approximately 6.5 kg (14.3 lbs). The bracket includes an attachment plate, angle adjuster, projector mount bracket, and various bolts and a drop prevention kit for safety.

Panasonic ET-PKD510S is a ceiling mount bracket designed for low ceilings, compatible with Panasonic projectors such as PT-DZ21K/DS20K/DW17K. It allows for vertical correction of +5° and horizontal slant correction of ±2.5°. The dimensions are 350.5 × 105.5 × 535 mm (13-13/16 × 4-5/32 × 21-1/16 inches) and it weighs approximately 6.5 kg (14.3 lbs). The bracket includes an attachment plate, angle adjuster, projector mount bracket, and various bolts and a drop prevention kit for safety.

S P E C F I L E
ET-PKD510S
Ceiling mount bracket for low ceilings
As of May 2012
SFD12A011
1 / 1
Specifications Vertical correction angle: +5°
Horizontal slant correction angle: ±2.5°
Dimensions (W × H × D): 350.5 × 105.5 × 535 mm
(13-13/16 × 4-5/32 × 21-1/16 inches)
Weight*: Approximately 6.5 kg (14.3 lbs)
Applicable projector: PT-DZ21K/DS20K/DW17K
Parts Attachment plate . . . . . . . . . . . . . . . . . . . . . . . . 1
Angle adjuster . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Projector mount bracket . . . . . . . . . . . . . . . . . . . 1
Washer-fitted hexagonal bolts (M6 × 30) . . . . . . 6
Washer-fitted hexagonal bolts (M6 × 16) . . . . . . 6
Washer-fitted hexagonal bolts (M8 × 20) . . . . . . 4
Drop prevention kit . . . . . . . . . . . . . . . . . . . . . . . 1
*
Average value. May differ depending on the actual unit.
unit : mm (inch)
NOTE: This illustration is not drawn to scale.
Description
This ceiling mount bracket is used when mounting a Panasonic's applicable projector to low ceilings.
C a u t i o n :
• Mounting should be done by a qualified technician.
• Make sure that the mounting (ceiling) area has sufficient strength.
• Read the enclosed mounting instructions thoroughly before starting.
• Do not use an electric screwdriver or impact driver to tighten screws. Use a torque driver or hexagon torque
wrench and tighten screws to the torque specified in the instructions.
• When the product is no longer going to be used, have it disposed of quickly by a professional disposal service.
Attachment plate
Attachment
plate
∅
78
(3-1/16)
78
(3-1/16 )
298
(11-23/32)
432
(17)
200
(7-7/8)
96
(3-25/32)
104
(4-3/32)
2
246.5
(9-23/32)
Projector
2
Attachment plateIllustration shows the bracket attached to a projector.
Dimensions
∅
5
9
(2
-5
/
16)
2-3-R6
(2-3-R1/4)
156 (6-5/32)
196 (7-23/32)
∅ 11 (∅ 7/16)
P
200 (7-7/8)
230 (9-1/16)
Weights and dimensions shown are approximate. Specifications subject to change without notice.
  • Page 1 1

Panasonic ET-PKD510S Datasheet

Panasonic
Brand
Panasonic
Model
ET-PKD510S
Category
Projector mounts
Type
Datasheet

Panasonic ET-PKD510S is a ceiling mount bracket designed for low ceilings, compatible with Panasonic projectors such as PT-DZ21K/DS20K/DW17K. It allows for vertical correction of +5° and horizontal slant correction of ±2.5°. The dimensions are 350.5 × 105.5 × 535 mm (13-13/16 × 4-5/32 × 21-1/16 inches) and it weighs approximately 6.5 kg (14.3 lbs). The bracket includes an attachment plate, angle adjuster, projector mount bracket, and various bolts and a drop prevention kit for safety.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents