Panasonic ET-PKB80 Datasheet

Panasonic
Brand
Panasonic
Model
ET-PKB80
Category
Projector mounts
Type
Datasheet

Panasonic ET-PKB80 is a ceiling mount bracket specially designed for LCD projectors. It offers versatile adjustment options with a vertical correction angle of +20° to -5°, a horizontal slant correction angle of ±10°, and a horizontal turn correction angle of ±5°. The adjustable poles and angle adjusters allow for precise positioning of the projector, ensuring optimal viewing angles. The bracket is constructed with durable materials and can support projectors weighing up to 6.2 lbs. It includes all necessary mounting hardware and detailed instructions for a secure and hassle-free installation.

Panasonic ET-PKB80 is a ceiling mount bracket specially designed for LCD projectors. It offers versatile adjustment options with a vertical correction angle of +20° to -5°, a horizontal slant correction angle of ±10°, and a horizontal turn correction angle of ±5°. The adjustable poles and angle adjusters allow for precise positioning of the projector, ensuring optimal viewing angles. The bracket is constructed with durable materials and can support projectors weighing up to 6.2 lbs. It includes all necessary mounting hardware and detailed instructions for a secure and hassle-free installation.

Attachment plate
ø49
81
(3-3/16˝)
96
(3-25/32˝)
370
(14-9/16˝)
116
(4-9/16˝)
374
(14-23/32˝)
70 (2-12/16˝)
110 (4-11/32˝)
140 (5-/12˝)
160 (6-5/16˝)
3-Ø9.5 (3/8˝)
Ø8.5 (11/32˝)
65
(2-9/16˝)
357–437 (14-1/16˝–17-7/32˝)
(Adjustable in 20 mm (25/32˝) steps)
150 (5-29/32˝)
130 (5-1/8˝)
100 (3-15/16˝)
20 (25/32˝)
Projector
ø43
(1-15/16˝)
(1-11/16˝)
S PEC F ILE
ET-PKB80
Ceiling mount bracket for high ceilings
As of April 2008 < 1 >
Specifications Vertical correction angle: +20°, -5°
Horizontal slant correction angle: ±10°
Horizontal turn correction angle: ±5°
Dimensions (W x H x D): 374 x 400– 480 x 211 mm (14-23/32˝ x 15-3/4˝–18-29/32˝ x 8-5/16˝)
Weight: 2.8 kg (6.2 lbs)
Attachment plateIllustration shows the ET-PKB80 attached to the projector.
Parts Attachment plate . . . . . . . . . . . . . . . . . . . . . . 1
Projector mount bracket . . . . . . . . . . . . . . . . 1
Adjuster pole A . . . . . . . . . . . . . . . . . . . . . . . 1
Adjuster pole B . . . . . . . . . . . . . . . . . . . . . . . 1
Angle adjuster A . . . . . . . . . . . . . . . . . . . . . . 1
Angle adjuster B . . . . . . . . . . . . . . . . . . . . . . 1
Holding bracket A . . . . . . . . . . . . . . . . . . . . . 1
Holding bracket B . . . . . . . . . . . . . . . . . . . . . 1
Washer-fitted hexagonal bolts (M6 x 12) . . . 19
Washer-fitted screws (M4 x 10) . . . . . . . . . . . 6
Wire rope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Flat wire clip . . . . . . . . . . . . . . . . . . . . . . . . . 2
Clamp tube . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Weights and dimensions shown are approximate. Specifications subject to change without notice.
unit : mm (inch)
NOTE: This illustration is not drawn to scale.
Dimensions
Description
This ceiling mount bracket is to be us ed when mounting LCD projectors to the ceiling.
Caution:
• All mounting work must be done by a qualified technician.
•Ensure that the mounting (ceiling) area has sufficient strength.
• Read the enclosed mounting instructions carefully before starting the mounting procedure.
• Do not use a power screwdriver or impact screwdriver to tighten screws. A torque screwdriver or similar tool
should be used.
• When the system is no longer to be us ed, have a qualified technician promptly remove and dispose of it.
  • Page 1 1

Panasonic ET-PKB80 Datasheet

Panasonic
Brand
Panasonic
Model
ET-PKB80
Category
Projector mounts
Type
Datasheet

Panasonic ET-PKB80 is a ceiling mount bracket specially designed for LCD projectors. It offers versatile adjustment options with a vertical correction angle of +20° to -5°, a horizontal slant correction angle of ±10°, and a horizontal turn correction angle of ±5°. The adjustable poles and angle adjusters allow for precise positioning of the projector, ensuring optimal viewing angles. The bracket is constructed with durable materials and can support projectors weighing up to 6.2 lbs. It includes all necessary mounting hardware and detailed instructions for a secure and hassle-free installation.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents