S P E C F I L E
ET-PKE16B
Bracket assembly
As of September 2011
SFL11A020
1 / 1
Weights and dimensions shown are approximate. Specifications subject to change without notice.
152
(5-31/32)
598 (23-17/32)
720 ( 28-11/32)
Specifications
Dimensions (W × H × D): 598 × 152 × 720 mm
(23-17/32˝ × 5-31/32˝ × 28-11/32 ˝)
Weight: Approx. 11.2 kg* (24.7 lbs*)
Applicable ceiling mount bracket: ET-PKE16H/PKE16S
Applicable projector: PT-EX16K
Parts
Projector mount bracket (bracket assembly) . . . . 1
Fixer plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Washer-fitted hexagonal bolts (M10 × 45) . . . . . . 4
Washer-fitted hexagonal bolts (M8 × 35) . . . . . . . 4
Washer-fitted hexagonal bolts (M8 × 16) . . . . . . . 4
Washer-fitted hexagonal bolts (M5 × 12) . . . . . . . 4
Protection sheet . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Wire rope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
*
Average value. May differ depending on models.
unit : mm (inch)
NOTE: This illustration is not drawn to scale.
Dimensions
Description
This bracket assembly is used when mounting a Panasonic projector to ceilings.
NOTE: This ceiling mount bracket cannot be used by itself. Combine it with the optional ET-PKE16H/PKE16S ceiling mount bracket.
C a u t i o n :
• Mounting should be done by a qualified technician.
• Make sure that the mounting (ceiling) area has sufficient strength.
• Read the enclosed mounting instructions thoroughly before starting.
• Do not use an electric screwdriver or impact driver to tighten screws. Use a torque driver or hexagon torque
wrench and tighten screws to the torque specified in the instructions.
• When the product is no longer going to be used, have it disposed of quickly by a professional disposal service.
/