2. ViziT
  3. BS-1

ViziT BS-1, BS-2, BS-4 Operating instructions

  • Hello! I've reviewed the user manual for the VIZIT button stations BS-1, BS-2, and BS-4. This document includes specifications, installation steps, safety information and describes features such as personal call buttons and LED backlighting. I'm ready to answer your questions about these devices.
  • What is the maximum voltage for the button stations?
    Can I make connections while the power is on?
    Where should I install the button station?
,,
Button stations , , are intended for use together with doorstation in video doorphones .
Personal CALL button for each subscriber
Name labels LED backlighting
Button station pc
Mounting kit pc
Operating instruction pc
Package pc
Button station does not contain voltage above .
Do not make any connections or repair when the power is on.
To maximize the reliability of this product, do not expose it to rain, snow or direct sun rays!
1. Fill in subscribers’ name labels and then fix them under the glass.
2. Fix the button station close to doorstation, using the screws and concrete inserts.
3. Conseal mounting holes with the gags from the mounting kit.
Perform all connections, following the operating instruction.
BS-1 BS-2 BS-4
BS-1 BS-2 BS-4 BVD-408 VIZIT
FEATURES
SPECIFICATIONS
PARTS LIST
1
1
1
1
SAFETY INSTRUCTIONS
15 VDC
INSTALLATION
ATTENTION!
BUD-408
=
=
Width, mm
Height, mm
Depth, mm
Weight, kg
Buttons
Model BS-1 BS-2 BS-4
124
95 95 95
75 75 150
10 10 10
0.2 0.2 0.4
Figure 1 - BS-1 fixing
79
Figure 2 - BS-2 fixing
79
134
Figure 3 - BS-4 fixing
79
/