Regency HD1100BK User guide

Type
User guide

This manual is also suitable for

Any problems or questions call Regency Ofce Furniture at 1-866-816-9822
IMPORTANT NOTICE:
● Check to be sure that you have all parts and hardware.
● Remove all wrapping materials, including staples & packing straps before you start to assemble.
● Do not tighten all screws/bolts until completely assembled.
● Keep all hardware parts out of reach of children.
1100 - INSTRUCTIONS
Parts:
A) Arms(2) B) Seat C) Back D) Mechanism E) Sleeve F) Cylinder G) Base H) Casters(5)
I
J
A
B
C
E
D
F G
H
K L M N
O
Hardware:
I) Large Assembly Key J) Medium Assembly Key K) Small Assembly Key L) Long Bolts(4) M) Medium Bolts(4)
N) Small Bolts(4) O) Caps(4)
STEP 2: Insert Cylinder(F) into Base(G).
Any problems or questions call Regency Ofce Furniture at 1-866-816-9822
STEP 1: Insert 5 Casters(H) into Base(G).
STEP 3: Insert Sleeve(E) over Cylinder(F).
H G
F
G
STEP 4: Attach the Mechanism(D) to the Seat(B) using 4 Short Bolts(N).
Be sure that the tilt tension knob is facing the front of the seat.
Note: Do NOT tighten bolts until all bolts have been started.
D
STEP 6: Attach the Arm(A) to the Right side with 2 Long Bolts(L). Repeat this
step for the Left Side. Place Caps(O) over inserts.
Note: Do NOT tighten bolts on each arm until all bolts have been started.
STEP 7: Finish by placing Cylinder(F) into
Mechanism(D) and apply force to the seat to ensure
connection.
B
1100 - INSTRUCTIONS
F
E
Right Side Left Side
L
L
A
STEP 5: Attach Back(C) to Seat(B) using 4 Medium Bolts(M).
Note: Do NOT tighten bolts until all bolts have been started.
B
C
A
L
L
N
N N
N
M(4)
  • Page 1 1
  • Page 2 2

Regency HD1100BK User guide

Type
User guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI