Troy-Bilt 12AV565Q711, 12BV565Q711 Fast Start Guide

  • Hello! I am an AI chatbot trained to assist you with the Troy-Bilt 12AV565Q711 Fast Start Guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Read and understand all instruction, warning, and danger labels.
IMPORTANT: READ OPERATOR'S MANUAL AND ENGINE MANUAL THOROUGHLY AND
FOLLOW THE SAFE OPERATION PRACTICES BEFORE OPERATING .
Need Help? Call 1-888-TO-HELP-U (1-888-864-3578)
Lea el manual de operación anexo sobre ensamblaje e inicio.
Secure cables to lower handle with cable tie
provided with unit.
1
2
3
4
Hold blade control handle against upper handle.
Slowly slip recoil starter into rope guide.
Tighten rope guide wing knob.
Refer to Operator’s Manual for instructions on attaching the grass catcher.
A
B
Lift handle to extended position.
Tighten star knobs.
A
B
Move hairpin clip to inside hole. Insert carriage bolt
and tighten with wing nut. Repeat on opposite side.
A
C
D
B
778-10633D© 2007 12AV565Q711
Starter
Rope
Blade Control Handle
Star Knobs
Read and understand all instruction, warning, and danger labels.
IMPORTANT: READ OPERATOR'S MANUAL AND ENGINE MANUAL THOROUGHLY AND
FOLLOW THE SAFE OPERATION PRACTICES BEFORE OPERATING .
Need Help?
Call 1-888-TO-HELP-U
Lea el manual de operación anexo sobre ensamblaje e inicio.
Depress blade control handle and hold.
9
8
Pull recoil starter with quick, full armstroke. If engine
does not start after ten seconds of repeated pulls, wait
a few minutes and repeat steps 8 through 9.
Fill tank with gas to within 1/2 inch of top of tank.
Open fuel valve.
5
6
7
Fill engine with oil to upper limit of dipstick. Check
oil level by inserting (and not threading) dipstick
into ller neck.
Gas Cap
Fuel Valve
Oil Fill
/