2. Troy-Bilt
  3. 12AV566F211

Troy-Bilt 12AV566F211, 12AV566N011, 12AV566N066 Fast Start Guide

  • Hello! I am an AI chatbot trained to assist you with the Troy-Bilt 12AV566F211 Fast Start Guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Read and understand all instruction, warning, and danger labels.
IMPORTANT: READ OPERATOR'S MANUAL AND ENGINE MANUAL THOROUGHLY AND
FOLLOW THE SAFE OPERATION PRACTICES BEFORE OPERATING .
Need Help? Call 1-888-TO-HELP-U (1-888-864-3578)
Lea el manual de operación anexo sobre ensamblaje e inicio.
Secure cables to lower handle with
cable tie provided.
1
2
3
4
Refer to Operator’s Manual for instructions on attaching the grass catcher.
Move hairpin clip to inside hole. Insert carriage bolt
and tighten with wing nut. Repeat on opposite side.
778-10726B
12AV566N011
12AV566F211
Starter
Rope
Blade Control Handle
© 2006
Star Knobs
A
C
D
B
Hold blade control handle against upper handle.
Slowly slip recoil starter into rope guide.
Tighten rope guide wing knob.
A
B
Lift handle to extended position.
Tighten star knobs.
A
B
Read and understand all instruction, warning, and danger labels.
IMPORTANT: READ OPERATOR'S MANUAL AND ENGINE MANUAL THOROUGHLY AND
FOLLOW THE SAFE OPERATION PRACTICES BEFORE OPERATING .
Need Help?
Call 1-888-TO-HELP-U
Lea el manual de operación anexo sobre ensamblaje e inicio.
Fill tank with gas to within 1/2 inch of
top of tank.
Fill engine with entire contents of oil bottle
supplied with your mower.
5
6
Gas Cap
Oil Fill
Need Help?
Call 1-888-TO-HELP-U
Depress blade control handle and hold.
8
7
Pull recoil starter with quick, full armstroke.
If engine does not start after ten seconds of
repeated pulls, wait a few minutes and repeat.
/