Zippity Baskenridge Vinyl Gate Kit User manual
- Category
- Car kits
- Type
- User manual
This manual is also suitable for
WWW.ZIPPITY-OUTDOOR.COM
1
ASSEMBLY
INSTRUCTIONS ZP19038
WWW.ZIPPITY-OUTDOOR.COM
VER. 111522
ZP19038
ASSEMBLY
INSTRUCTIONS
60 MIN
Approximate assembly me
Want to see a video on how to
assemble this product?
Scan the QR code
BASKENRIDGE
VINYL GATE KIT W/
FENCE WINGS
WWW.ZIPPITY-OUTDOOR.COM
2
ASSEMBLY
INSTRUCTIONS
ZP19038
kCheck the inside of the larger pieces in your box for other
materials packed inside.
kWhen assembling components, place on a non-abrasive
surface (i.e. shipping box) to avoid scratching.
k
unobstructed assembling.
kYou should not need to use excessive force when assembling
components.
VISIT OUR WEBSITE FIRST,
SO WE CAN HELP YOU RIGHT AWAY!
Although great care has been taken to ensure proper packaging
and handling of this product, occasionally problems occur. If you
our website to order replacement parts. If you experience any
further trouble with your product, please contact our customer
service department.
parts.nychbrands.com
support@zippity-outdoor.com
704-892-5222 / 877-234-6196
Customer service agents are available to take calls weekdays from 9am-
5pm EST. If you call outside of business hours, please leave a voicemail.
To help you quickly and accurately, please have reference item
number ZP19038
stamped number on the inside of the box.
this product, we are happy to assist you with the process, so
please give us a call at 704-892-5222 / 877-234-6196.
If for some reason you need to return this product, please
return the product,
GENERAL
INFORMATION
MISSING
OR
DAMAGED
PARTS?
NEED
ASSEMBLY
HELP?
NEED TO
RETURN?
IMPORTANT
WWW.ZIPPITY-OUTDOOR.COM
3
ASSEMBLY
INSTRUCTIONS ZP19038
understand your fence.
install your gate posts before you do anything else.
of fence that is connected to another post. This way, the weight strain will be trans-
ferred onto two posts versus just one. Installing fence panels on both sides of your
your gate correctly, please disassemble as necessary, and use the provided self-drilling
stainless steel screws to permanently assemble the gate.
1. That you have everything necessary to complete the gate.
2. That you will have assembled the gate frame in the correct order.
3. All of the pieces t and funcon properly.
4. The gate height and width are similar to the measurements shown on page four.
GENERAL
INFORMATION
Use joiner clips (included in ZP19037) to
aach the gate to the fence panels.
WWW.ZIPPITY-OUTDOOR.COM
4
ASSEMBLY
INSTRUCTIONS
ZP19038
Baskenridge Vinyl Gate Kit w/ Fence Wings
” W x 36” H)
36 in
36 in
Ground
WWW.ZIPPITY-OUTDOOR.COM
5
ASSEMBLY
INSTRUCTIONS ZP19038
STEP 1:
UNPACK MATERIALS
STEP 1.1
Check the inside of larger pieces in your
box for other materials packed inside.
WWW.ZIPPITY-OUTDOOR.COM
6
ASSEMBLY
INSTRUCTIONS
ZP19038
OPTIONAL
Level
Drill
May be needed depending on soil condion
May be needed depending on soil condion
STEP 2:
LAY OUT TOOLS
WWW.ZIPPITY-OUTDOOR.COM
7
ASSEMBLY
INSTRUCTIONS ZP19038
STEP 3:
LAY OUT MATERIALS
A B
D
F
C
E
G
H
I
J
K
L
Post Cap (6)
Post (4)
⅞
Gate Post (2)
⅞ Picket
¼
(2)
(4)
Gate Hinge (2)
Stainless Steel
(40)
(4)
Tapping Steel
WWW.ZIPPITY-OUTDOOR.COM
8
ASSEMBLY
INSTRUCTIONS
ZP19038
STEP 4:
ASSEMBLE GATE FRAME
STEP 4.1 STEP 4.2
Orient the Gate Posts (E) so the tabs are
facing up as illustrated. Insert the gate
.
(F) into the
routed holes in the gate rail
Slide the second gate rail over the gate posts
and rail align. The pickets will click into place.
Fasten the gate rail to the gate posts using (4) ¾”
white self-drilling stainless steel screws.
Align the pre-drilled holes in the gate rail
with the pre-drilled holes in the gate posts
and fasten together with (4) ¾” White
Self-Drilling Stainless Steel Screws (J).
D
E
tabs
Note: The routed
picket holes should be
facing down.
Align
J
F
STEP 4.3 STEP 4.4
Align
WWW.ZIPPITY-OUTDOOR.COM
9
ASSEMBLY
INSTRUCTIONS ZP19038
STEP 4.5
STEP 5.1 STEP 5.2
(K) against a gate rail
and gate post as shown. Fasten the L bracket with (4) ¾” white self-drilling
stainless steel screws. Repeat for the three remaining inside corners.
(A) over the
gate posts. The post caps will lock into
place.
Pre-drill two holes on the face of the gate rails
for each Gate Hinge (G) (L).
Self-Tapping Steel Screws .
K
A
STEP 5:
POST CAPS, GATE HINGES, AND GATE LATCH
G
I
L
¼”
WWW.ZIPPITY-OUTDOOR.COM
10
ASSEMBLY
INSTRUCTIONS
ZP19038
STEP 6.1 STEP 6.2
STEP 5.3
Align the Gate Latch (H) with the top of the top gate rail and pre-drill
black self-tapping
steel screws.
Orient (2) Posts (C)
so the tabs are facing
up as illustrated.
Insert the posts down
through (2) Rails (B).
Align the pre-drilled
holes in the rails with
the pre-drilled holes
in the posts.
Fasten the posts
and rails together
self-drilling stainless
steel screws. Repeat
for the second gate
wing.
H
C
B
STEP 6:
ASSEMBLE GATE WINGS
Tabs
Align
Align
Note: Orient the posts as illustrated
WWW.ZIPPITY-OUTDOOR.COM
11
ASSEMBLY
INSTRUCTIONS ZP19038
STEP 7:
GATE WINGS INTO THE GROUND
STEP 7.1
using a claw hammer (or something
equivalent) as illustrated. Add water to
loosen the soil if necessary.
Use a block of wood
to protect the top of
the posts, and gently
hammer each gate wing
equally into the ground
until the bottom rails
are about 2” above the
ground.
3 8 ¹¹/₁₆”
3 8 ¹¹/₁₆”
4 0 ³/₁₆”
STEP 7.2 STEP 7.3
WWW.ZIPPITY-OUTDOOR.COM
12
ASSEMBLY
INSTRUCTIONS
ZP19038
STEP 7.4
If your ground is too hard, or you have more than 3 or
with water as illustrated.
Push the fence wings into the holes.
1
2
3
WWW.ZIPPITY-OUTDOOR.COM
13
ASSEMBLY
INSTRUCTIONS ZP19038
STEP 8:
GATE
Level the assembled unit, backfill, and
compact dirt around the base of each post to
strengthen the unit.
Align the gate hinges with the rails as illustrated. Mark and pre-drill two
black self-tapping steel screws.
Push the post caps down over the
tops of the posts as illustrated. The
post caps will lock into place.
STEP 7.5
STEP 8.1
STEP 7.6
Level
WWW.ZIPPITY-OUTDOOR.COM
14
ASSEMBLY
INSTRUCTIONS
ZP19038
STEP 8.2
Align the catch with the gate latch as shown and pre-drill two more holes
secure the latch catch.
Follow the instructions included in
your Baskenridge Fence Kit (ZP19037).
Use the joiner clips provided in the
fence kit to attach the gate to the
fence.
STEP 9:
FENCE PANELS
STEP 9.1
WWW.ZIPPITY-OUTDOOR.COM
15
ASSEMBLY
INSTRUCTIONS ZP19038
WWW.ZIPPITY-OUTDOOR.COM
704-892-5222
877-234-6196
support@zippity-outdoor.com
6935 Reames Rd. Ste. K.
Charloe, NC 28216
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
Zippity Baskenridge Vinyl Gate Kit User manual
- Category
- Car kits
- Type
- User manual
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Zippity ZP19028 User manual
-
-
Zippity ZP19071 User manual
-
Zippity Bella Puppy and Garden Gate Kit User manual
-
Zippity Newport Vinyl Picket Gate Installation guide
-
-
-
-
-
Other documents
-
Zippity Outdoor Products ZP19004 Installation guide
-
Zippity Outdoor Products ZP19022 Operating instructions
-
Zippity Outdoor Products ZP19048 Operating instructions
-
Zippity Outdoor Products ZP19043 Operating instructions
-
Zippity Outdoor Products ZP19002 Operating instructions
-
Zippity Outdoor Products ZP19001 Installation guide
-
Zippity Outdoor Products ZP19002 Installation guide
-
Zippity Outdoor Products ZP19055 Installation guide
-
Zippity Outdoor Products ZP19052 Installation guide
-
Zippity Outdoor Products ZP19028 Installation guide
