WWW.ZIPPITY-OUTDOOR.COM
1
ASSEMBLY
INSTRUCTIONS ZP19004
WWW.ZIPPITY-OUTDOOR.COM
VER. 012121
ZP19004
ASSEMBLY
INSTRUCTIONS
60 MIN
Approximate assembly me
Want to see a video on how to
assemble this product?
Scan the QR code
NEWPORT
VINYL PICKET GATE
WWW.ZIPPITY-OUTDOOR.COM
2
ASSEMBLY
INSTRUCTIONS
ZP19004
kCheck the inside of the larger pieces in your box for other
materials packed inside.
k
k
unobstructed assembling.
k
components.
VISIT OUR WEBSITE FIRST,
SO WE CAN HELP YOU RIGHT AWAY!
Although great care has been taken to ensure proper packaging
parts.nychbrands.com
704-892-5222 / 877-234-6196
Customer service agents are available to take calls weekdays from 9am-
5pm EST. If you call outside of business hours, please leave a voicemail.
number ZP19004
stamped number inside the box.
so
please give us a call at 704-892-5222 / 877-234-6196.
you will need to iniate the return from the
company you originally purchased from.
GENERAL
INFORMATION
MISSING
OR
DAMAGED
PARTS?
NEED
ASSEMBLY
HELP?
NEED TO
RETURN?
IMPORTANT
WWW.ZIPPITY-OUTDOOR.COM
3
ASSEMBLY
INSTRUCTIONS ZP19004
1. Read over fence instrucons rst.
2. Pre-assemble the gate frame.
3. Install your gate posts before your fence posts.
4. Do not hang your gate system o a single non-supported post.
understand your fence.
install your gate posts before you do anything else.
1. That you have everything necessary to complete the gate.
2. That you will have assembled the gate frame in the correct order.
3. All of the pieces t and funcon properly.
4. The gate height and width are similar to the measurements shown on page four.
GENERAL
INFORMATION
WWW.ZIPPITY-OUTDOOR.COM
4
ASSEMBLY
INSTRUCTIONS
ZP19004
port Vinyl Picket Gate
Ground
3 in
42 in Opening
1/2 in 1/2 in
33 1/2 in
2 in
41 in Gate Width
WWW.ZIPPITY-OUTDOOR.COM
5
ASSEMBLY
INSTRUCTIONS ZP19004
STEP 1:
LAY OUT MATERIALS
A B
D
F
C
E
G
H
I
J
K
L
Top Gate Bracket White 1¼” Self-Drilling
Stainless Steel Screw
Black 1¼” Self-Drilling
Stainless Steel Screw
Black 5/8” Self-Drilling
Stainless Steel Screw (6)
Gate Hinge
Latch Catch
Gate Finger
Top Rail
1½
Vercal Rail
1½
Picket (6)
Boom Gate Bracket Boom Rail
1½
Note: Top Rail
has Picket
holes on both
sides
Note: Top
Gate Brackets
have Picket
holes on the
top
WWW.ZIPPITY-OUTDOOR.COM
6
ASSEMBLY
INSTRUCTIONS
ZP19004
STEP 2:
ASSEMBLE
STEP 2.1 STEP 2.2
(F)
(E)
it hits the corner of the bracket as
illustrated.
corner as illustrated.
(C)
F
E
C
Insert fully to this point.
Insert fully to this point.
Insert fully to this point.
Completed gate boom.
Insert fully to this point.
STEP 2.3
WWW.ZIPPITY-OUTDOOR.COM
7
ASSEMBLY
INSTRUCTIONS ZP19004
STEP 3:
ASSEMBLE
SIDES
STEP 3.1 STEP 3.2
Insert fully to this point.
Insert fully to this point.
Insert fully to this point.
Insert fully to this point.
Note: Opening on Top
Gate Bracket
Insert the Top Rail (B)
(A)
corner as illustrated.
corner as illustrated. The last routed hole
on each end of the Top Rail should line
A
B
STEP 3.3
Completed gate frame.
WWW.ZIPPITY-OUTDOOR.COM
8
ASSEMBLY
INSTRUCTIONS
ZP19004
STEP 4:
SCREW
STEP 5:
INSERT PICKETS INTO GATE FRAME
STEP 4.1
STEP 5.1
(G)
Insert Pickets (D) through the
Completed gate with frame.
G
D
Note: Do not put
screws in the out-
ward facing holes
of this top bracket
and gate boom
bracket to allow
for future hinge
installaon.
WWW.ZIPPITY-OUTDOOR.COM
9
ASSEMBLY
INSTRUCTIONS ZP19004
STEP 6:
FASTEN
STEP 7:
SECURE
STEP 6.1
STEP 7.1 STEP 7.2
(J) onto the front of the
(H).
Use temporary spacers or blocks to
rest the gate on during alignment and
J
H
WWW.ZIPPITY-OUTDOOR.COM
10
ASSEMBLY
INSTRUCTIONS
ZP19004
STEP 8:
ALIGN AND INSTALL
STEP 7.3
STEP 8.1
Align and fasten the Latch Catch (K)
(L)
(I).
Note: If your internal pipe anchor ends up close to the inside corner of the
post, you will need to angle the 1¼” self-drilling stainless steel screws to
avoid the pipe anchor.
K
L
I
WWW.ZIPPITY-OUTDOOR.COM
11
ASSEMBLY
INSTRUCTIONS ZP19004
WWW.ZIPPITY-OUTDOOR.COM
12
ASSEMBLY
INSTRUCTIONS
ZP19004
WWW.ZIPPITY-OUTDOOR.COM
704-892-5222
877-234-6196
support@zippity-outdoor.com
6935 Reames Rd. Ste. K.
Charloe, NC 28216
/
