15
EN
INTRODUCTION
Read this manual carefully as it offers practical advice to help you get the most from your
washing machine.
This Instruction Manual contains
everything you need to know about
the everyday running of your
machine. Keep it for future
reference.
An Installation and Maintenance
Manual is also provided which you
should consult during the
installation and routine
maintenance of your washing
machine. The manual also contains
information about possible working
problems, advice about the wash
load, an explanation of label
symbols and hints about how to
remove stubborn stains.
1.- CONTROL PANEL
2.- LID
3.- DRUM
4.- DETERGENT COMPARTMENT
5.- FILTER DOOR
6.- FILTER
When contacting a IBERNA or one of its Technical Assistance
Centre always refer to the model (see control panel) and the
registration and series numbers which are indicated at the bottom of
the machine under the lower panel or on the warranty certificate. That
is to say, everything that appears in the box.
Providing this information will ensure a faster and more efficient service.
16
INDEX
GUARANTEE ..............................................................................
17
TECHNICAL DATA .......................................................................
18
OPENING THE LID – LOADING ................................................
19
DETERGENT DISPENSER ........................................................
20
PROGRAMME SELECTION .......................................................
21
CONTROL DESCRIPTION .........................................................
22
TABLE OF PROGRAMMES .......................................................
24
page
17
SERVICE
GUARANTEE
1.
The appliance comes with a guarantee certificate.
2.
Complete part A and keep it in a safe place. It should
be presented to the Technical Assistance Centre in
the event of a repair being necessary along with the
legal receipt issued by the dealer on purchase.
3.
Do not forget to send part B of the Guarantee
Certificate to be validated within 15 days of purchase.
18
TECHNICAL DATA
Load capacity ...........................................................................
kg.
Voltage .......................................................................................
V.
Wash motor power rating ..........................................................
W.
Spin motor power rating ............................................................
W.
Electropump power rating .........................................................
W.
Heating element power rating ...................................................
W.
Max. power input ......................................................................
W.
Fuse ..........................................................................................
A.
Water pressure .....................................................................
MPa
Spin speed ................................................................
r.p.m./min
Water consumption (60º C programme) ...................................
lit.
Energy consumption (60º C programme) .............................
kWh
Energy efficiency rating .................................................................
4,5
230
360
560
30
1.950
2.300
10
0,05 min.
0,8 max.
400
65
1,21
C
ITL 416T
19
OPENING THE DRUM
1.
Lift the lid (A) and open completely. Next open the drum
door following these instructions:
2.
Press catch (B) and kept it pressed down.
Press the first shutter (C) to unlock the two shutters (C)
and (D).
3.
Open the second shutter (D). Open the first shutter (C).
Place the washing in the drum.
4.
Close the first shutter (C).
Close the second shutter (D) so that the catch on the
first shutter fits correctly into the slot. Release.
5.
Ensure that both shutters are perfectly aligned and properly
closed.
IMPORTANT: IT IS IMPORTANT TO MAKE SURE THAT
THE DRUM IS CAREFULLY CLOSED BEFORE
OPERATING THE MACHINE, OTHERWISE THE
MACHINE OR LAUNDRY COULD GET DAMAGED.
2 min.
A
FRONT OF THE
WASHING MACHINE
C
B
D
D
C
D
C
FRONT OF THE
WASHING MACHINE
C
D
IMPORTANT: A SPECIAL
SAFETY DEVICE
PREVENTS THE LID FROM
BEING OPENED
IMMEDIATELY AFTER THE
WASH HAS FINISHED.
ONCE THE SPIN CYCLE
HAS FINISHED, WAIT FOR
2 MINUTES BEFORE
TRYING TO OPEN THE LID.
WASHING
MACHINE LID
FRONT OF THE
WASHING MACHINE
FRONT OF THE
WASHING MACHINE
20
I
II
MAX.
MAX.
MAX.
DETERGENT DISPENSER
The detergent dispenser is divided into 4 compartments:
• Compartment I, is for prewash powder detergent. The recommended quantity is
60 gm of detergent (for 4,5 kg of laundry).
• Compartment II, is for wash powder detergent. The recommended quantity is 120
gm of detergent (for 4,5 kg of laundry).
• The compartment is for bleach. The recommended quantity is 7 cl.
• The compartment is for fabric conditioners, scenting agents and special
additives. The recommended quantity is 5 cl.
The detergent compartment has two guidance lines:
• RECOMMENDED (lower line). This indicates the recommended level for the prewash
and wash compartments.
• MAX. This indicates the maximum level which should never be exceeded.
MAXIMUM
(wash)
MAXIMUM
(bleach and scenting agent)
MAXIMUM
(prewash)
RECOMMENDED
21
PROGRAMME SELECTION
WHEN SELECTING A PROGRAMME, ENSURE THAT THE START/STOP BUTTON IS
NOT ACTIVATED.
To select a programme:
• Programmes are selected by means of the corresponding control knob (A). See the
table of programmes.
• Select the wash temperature by means of the corresponding control knob.
• Select the different options available by pressing the corresponding buttons.
22
A
B
D
E
G
H
CONTROL DESCRIPTION
Programme selector knob ...........................................................
Temperature selector knob .........................................................
Spin exclusion button..................................................................
1/2 load button ............................................................................
ON/OFF pilot light .......................................................................
ON/OFF button ...........................................................................
MOD. ITL 416 T
23
USE OF THE SELECTION CONTROLS
A
. PROGRAMME SELECTOR KNOB
This control allows you to select the washing programmes.
ALWAYS ROTATE the control in a clockwise direction,
never in an anticlockwise direction. Do not press the “on”
button (H) before selecting the programme
.
If you wish to modify the position of the control or select
another programme once a cycle has commenced, press
the ON/OFF button. Press again to recommence once the
modification has been completed.
B
. TEMPERATURE SELECTOR KNOB
This control allows you to select the temperature of your
wash.
If you wish to carry out a cold wash, turn the knob until the
cold symbol coincides with the selector mark.
THE KNOB CAN BE TURNED IN BOTH DIRECTIONS.
Do not exceed the maximum temperature recommended
for each cycle in the table of programmes.
D
. SPIN EXCLUSION BUTTON
This button excludes the spin cycle from the wash programme. This option is
recommended for special fabrics.
E
. 1/2 LOAD BUTTON
The water load for a small wash may be reduced by pressing the load
button. This saves water, detergent and electricity. The amount of detergent
used should be reduced in proportion to the load.
IMPORTANT: NEVER PRESS THE HALF LOAD BUTTON WHEN
WASHING PURE NEW WOOL AND VERY DELICATE FABRICS.
G
. ON/OFF PILOT LIGHT
H
. ON/OFF BUTTON
MOD. ITL 416 T
24
The first programmes in each group are longer and therefore ensure a more efficient wash at the same
temperature. Select the later programmes for lightly soiled or particularly delicate clothes.
5
6
7
8
Z
MAX. TEMP.
SEL. ºC
•
TABLE OF PROGRAMMES
HEAVILY SOILED
COLOUREDS
ACRYLICS
WOOL
GENTLE RINSE
GENTLE LAST RINSE
GENTLE SPIN
EMPTY
Drain off water
INTENSIVE HEAVILY SOILED
NORMAL
FAST COLOUREDS
DELICATE COLOUREDS
BLEACH/WHITENER
Organic stains
VIGOROUS RINSE
VIGOROUS LAST RINSE
VIGOROUS SPIN
PROG.
SEL.
I
II
4,5
4,5
4,5
3,5
—
—
—
—
MAX.
LOAD
IN KG
TYPE OF
FABRIC
PROGRAMME
PRODUCTS
•
•
•
•
•
•
•
•
•
•
•
•
•
•
2
2
2
1
—
—
—
—
•
•
•
•
•
•
•
•
•
•
Programme
*
(60ºC), as per standard EN 60456.
FAST WASH PROGRAMME
32-minute cycle 2
32´
COTTON
SYNTHETICS
DELICATES
From cold to…
90º
From cold to…
90º
From cold to…
60º
From cold to…
40º
—
—
—
—
From cold to…
60º
From cold to…
50º
From cold to…
40º
From cold to…
40º
—
—
—
—
1
*
2
3
4
From cold to…
40º
MOD. ITL 416 T
25
REMARKS
1. For highly soiled clothes, use a maximum load of 3 kg.
2. In programmes 5, 6, 7 and 8 the washing machine stops with water in the drum at
the end of the rinse cycle to prevent creasing.
To finish the cycle, select programme Z to drain the drum. Another option is to select
programme: gentle spin.
Always turn the machine off with the ON/OFF button before selecting
programme.
3. In programmes 1 and 2, add bleach in the appropriate compartment for automatic
whitening.
4. This machine is designed to use fabric softener in the last rinse automatically in all
washing cycles.
32-MINUTE FAST PROGRAMME
This programme runs through a complete washing cycle for up to 2 kg of
clothes at 40 ºC in just 32 minutes.
Pour washing powder/liquid into the pre-wash compartment (compartment
I).
The maximum amount of bleach which can be used is 35 gm.
The 32-minute fast programme can also be used as a pre-wash cycle with
particularly heavily soiled clothes. Just select the desired main programme
afterwards.
26
/
