Iberna LB ITL 413 User manual
- Category
- Washing machines
- Type
- User manual
Iberna LB ITL 413 is a washing machine with a load capacity of 5 kg. It has a maximum spin speed of 400 revolutions per minute and an energy efficiency rating of C. The machine has a variety of programs to choose from, including programs for cotton, synthetics, wool, and delicates. It also has a program for bleaching and a program for water discharge. The machine has a detergent dispenser with four compartments, for prewash detergent, wash detergent, bleach, and fabric softener. It also has a 2-minute safety lock to prevent the lid from being opened immediately after the wash has finished.
Iberna LB ITL 413 is a washing machine with a load capacity of 5 kg. It has a maximum spin speed of 400 revolutions per minute and an energy efficiency rating of C. The machine has a variety of programs to choose from, including programs for cotton, synthetics, wool, and delicates. It also has a program for bleaching and a program for water discharge. The machine has a detergent dispenser with four compartments, for prewash detergent, wash detergent, bleach, and fabric softener. It also has a 2-minute safety lock to prevent the lid from being opened immediately after the wash has finished.
15 16
INTRODUCTION
Read this manual carefully as it offers practical advice to help you get the most from your
washing machine.
This Instruction Manual contains
everything you need to know about
the everyday running of your
machine. Keep it for future
reference.
An Installation and Maintenance
Manual is also provided which you
should consult during the
installation and routine
maintenance of your washing
machine. The manual also contains
information about possible working
problems, advice about the wash
load, an explanation of label
symbols and hints about how to
remove stubborn stains.
1.- CONTROL PANEL
2.- LID
3.- DRUM
4.- DETERGENT COMPARTMENT
5.- FILTER
INDEX
GUARANTEE .............................................................................
17
TECHNICAL DATA .......................................................................
18
OPENING THE LID – LOADING ................................................
19
DETERGENT DISPENSER ........................................................
20
PROGRAMME SELECTION .......................................................
21
CONTROL DESCRIPTION .........................................................
22
TABLE OF PROGRAMMES .......................................................
24
page
EN
When contacting a IBERNA or one of its Technical Assistance
Centre always refer to the model (see control panel) and the
registration and series numbers which are indicated at the bottom of
the machine under the lower panel or on the warranty certificate. That
is to say, everything that appears in the box.
Providing this information will ensure a faster and more efficient service.
SERVICE
17 18
5
230
360
560
30
1.850
2.300
10
0,05 min.
0,8 max.
400
75
1,35
C
TECHNICAL DATA
Load capacity ...........................................................................
kg.
Voltage .......................................................................................
V.
Wash motor power rating ..........................................................
W.
Spin motor power rating ............................................................
W.
Electropump power rating .........................................................
W.
Heating element power rating ...................................................
W.
Max. power input ......................................................................
W.
Fuse ..........................................................................................
A.
Water pressure .....................................................................
MPa
Spin speed ................................................................
r.p.m./min
Water consumption (60º C programme) ...................................
lit.
Energy consumption (60º C programme) .............................
kWh
Energy efficiency rating .................................................................
ITL 413
GUARANTEE
1.
The appliance comes with a guarantee certificate.
2.
Complete part A and keep it in a safe place. It should
be presented to the Technical Assistance Centre in
the event of a repair being necessary along with the
legal receipt issued by the dealer on purchase.
3.
Do not forget to send part B of the Guarantee
Certificate to be validated within 15 days of purchase.
OPENING THE DRUM
1.
Lift the lid (A) and open completely. Next open the drum
door following these instructions:
2.
Press catch (B) and kept it pressed down.
Press the first shutter (C) to unlock the two shutters (C)
and (D).
3.
Open the second shutter (D). Open the first shutter (C).
Place the washing in the drum.
4.
Close the first shutter (C).
Close the second shutter (D) so that the catch on the first
shutter fits correctly into the slot. Release.
5.
Ensure that both shutters are perfectly aligned and properly
closed.
IMPORTANT: IT IS IMPORTANT TO MAKE SURE THAT
THE DRUM IS CAREFULLY CLOSED BEFORE
OPERATING THE MACHINE, OTHERWISE THE MACHINE
OR LAUNDRY COULD GET DAMAGED.
DETERGENT DISPENSER
The detergent dispenser is divided into 4 compartments:
• Compartment I, is for prewash liquid or powder detergent.
The recommended quantity is 60 gm of detergent (for 5 kg
of laundry).
• Compartment II, is for wash powder detergent. The
recommended quantity is 120 gm of detergent (for 5 kg of
laundry).
• The compartment is for bleach. The recommended
quantity is 70 c.c.
• The compartment is for fabric conditioners, scenting
agents and special additives. The recommended quantity is
50 c.c.
CAUTION: REMEMBER THAT SOME
DETERGENTS DO NOT GET TAKEN AWAY
EASILY BY THE WATER. IN THIS CASE, IT IS
BEST TO PUT A «WASH BALL» STRAIGHT IN
THE DRUM.
19 20
2 min.
A
FRONT OF THE
WASHING MACHINE
C
B
D
D
C
D
C
FRONT OF THE
WASHING MACHINE
C
D
IMPORTANT: A SPECIAL
SAFETY DEVICE PREVENTS
THE LID FROM BEING
OPENED IMMEDIATELY
AFTER THE WASH HAS
FINISHED. ONCE THE SPIN
CYCLE HAS FINISHED, WAIT
FOR 2 MINUTES BEFORE
TRYING TO OPEN THE LID.
WASHING
MACHINE LID
FRONT OF THE
WASHING MACHINE
FRONT OF THE
WASHING MACHINE
A
D
E
G
H
21 22
MOD. ITL 413
PROGRAMME SELECTION
WHEN SELECTING A PROGRAMME, ENSURE THAT THE START/STOP BUTTON IS NOT
ACTIVATED.
To select a programme:
• Programmes are selected by means of the corresponding control knob (A). See the
table of programmes.
• Select the different options available by pressing the corresponding buttons.
CONTROL DESCRIPTION
Programme selector knob ...........................................................
90º C button ................................................................................
1/2 load button ............................................................................
ON/OFF pilot light .......................................................................
ON/OFF button ...........................................................................
Curtains, skirts, blouses, shirts
WOOL
“machine washable”
Delicate rinse
Conditioner, fragrance, softener
Delicate spin
VERY DIRTY
Shirts, sheets, baby clothes, whites
NORMAL DIRTY
Non-delicate shirts, blouses, coloured skirts
Delicate Colours
LIGHTLY SOILED
Delicate rinse
Conditioner, fragrance, softener
Delicate spin
WATER DISCHARGE
USE OF THE SELECTION CONTROLS
A
. PROGRAMME SELECTOR KNOB
This control allows you to select the washing programmes.
ALWAYS ROTATE the control in a clockwise direction, never
in an anticlockwise direction. Do not press the “on” button
(H) before selecting the programme
.
If you wish to modify the position of the control or select
another programme once a cycle has commenced, press
the ON/OFF button. Press again to recommence once the
modification has been completed.
D
. 90º C BUTTON
If this button is pressed the wash temperature will be 90º C. This option is
recommended for cotton and coloured fabrics.
E
. 1/2 LOAD BUTTON
The water load for a small wash may be reduced by pressing the load
button. This saves water, detergent and electricity. The amount of detergent
used should be reduced in proportion to the load.
IMPORTANT: NEVER PRESS THE HALF LOAD BUTTON WHEN
WASHING PURE NEW WOOL AND VERY DELICATE FABRICS.
G
. ON/OFF PILOT LIGHT
H
. ON/OFF BUTTON
23
24
MOD. ITL 413
TABLE OF PROGRAMMES
1
2
3
*
4
Cotton, linen
Cotton, mixed and
non-delicates
Cotton, mixed
Cotton
Cotton, linen
VERY DIRTY
Sheets, solid-block coloured and white tablecloths,
napkins, underwear
NORMAL DIRTY
Sheets, solid-block coloured and white tablecloths,
napkins, underwear
Cotton resistant
Lightly soiled - Delicates colours
Bleaching
Organic stains
Energetic rinse
Conditioner, fragrance, softener
Energetic spin
I
II
NON-DELICATES
5
5
5
3,5
—
—
—
•
•
•
•
•
•
•
•
•
•
•
•
•
•
2
2
2
2
—
—
MIXED SYNTHETICS
Synthetics (Rayon,
Acrylics)
Woollens
Mixed,
synthetics,
woollen delicates
9
10
*
1,5
1
—
—
40º
40º
—
—
•
•
•
•
•
EXTREM. DELIC. FABRICS
5
6
*
7
8
Z
Mixed non-
delicates
Synthetics (Rayon,
Acrylics)
Delicate synthetics
Mixed, synthetics,
delicates
Clothes which do
need to be spun
•
•
•
•
•
•
•
•
•
60º
60º
50º
40º
—
—
—
•
•
•
Programme
*
, according to EN 60456 Regulations.
The first program in each group is the longest and thus ensures the most effective wash at a given
temperature. The other programs should be selected for clothes which are only lightly soiled or are
particularly delicate.
SEL.
PROG.
MAX.
LOAD
IN KG
TYPE OF
FABRIC
PROGRAMME
DETERGENT
T
Cº
60º
*
60º
*
60º
40º
—
—
—
MOD. ITL 413
NOTE:
1. If the wash load is very dirty it is best to reduce the load weight to 3 kg.
2. In programmes 5-6-7-8-9-10, the washing machine stops with water in the drum at the
end of the rinse cycle to prevent creasing.
The cycle may be ended in two ways: - Move the programme selector forward one step.
- Select programme Z (water discharge). In this case, disconnect the ON/OFF button before
making the selection on the control.
3. Programmes 1, 2 and 3 have an automatic bleaching option. Simply place the bleaching
agent in the compartment.
4. Programmes 1-5-9 are with prewash.
5. The washing machine is designed to incorporate fabric softener automatically in the last
rinse of each washing cycle.
25
*
90º C if button is pressed.
-
1
-
2
-
3
-
4
-
5
-
6
Iberna LB ITL 413 User manual
- Category
- Washing machines
- Type
- User manual
Iberna LB ITL 413 is a washing machine with a load capacity of 5 kg. It has a maximum spin speed of 400 revolutions per minute and an energy efficiency rating of C. The machine has a variety of programs to choose from, including programs for cotton, synthetics, wool, and delicates. It also has a program for bleaching and a program for water discharge. The machine has a detergent dispenser with four compartments, for prewash detergent, wash detergent, bleach, and fabric softener. It also has a 2-minute safety lock to prevent the lid from being opened immediately after the wash has finished.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Candy LB CTS 60 T User manual
-
-
-
-
-
-
-
-
-