Otsein LB LYO86BSY User manual

Category
Washing machines
Type
User manual

This manual is also suitable for

When contacting a OTSEIN or one of its Technical Assistance
Centre always refer to the model (see control panel) and the
registration and series numbers which are indicated at the bottom of
the machine under the lower panel or on the warranty certificate. That
is to say, everything that appears in the box.
Providing this information will ensure a faster and more efficient service.
36 37
INTRODUCTION
Read this manual carefully as it offers practical advice to help you get the most from your
washing machine.
This Instruction Manual
contains everything you need to
know about the everyday
running of your machine. Keep
it for future reference.
An Installation and
Maintenance Manual is also
provided which you should
consult during the installation
and routine maintenance of
your washing machine. The ma-
nual also contains information
about possible working
problems, advice about the
wash load, an explanation of
label symbols and hints about
how to remove stubborn stains.
1.- CONTROL PANEL
2.- LID
3.- DRUM
4.- DETERGENT COMPARTMENT
5.- FILTER DOOR
6.- FILTER
7.- WHEEL TROLLEY
INDEX
TECHNICAL DATA .......................................................................
38
OPENING THE LID – LOADING ................................................
39
DETERGENT DISPENSER ........................................................
40
SAFETY AQUABLOCK ................................................................
41
VARIABLE CAPACITY .................................................................
41
PROGRAMME SELECTION .......................................................
41
CONTROL DESCRIPTION
- LTO 86 B ................................................
42
- LTO 106 A - 126 A ...................................
45
TABLE OF PROGRAMMES
- LTO 86 B ................................................
48
- LTO 106 A - 126 A ...................................
50
page
EN
38 39
TECHNICAL DATA
Load capacity ..................................................
kg.
Voltage ...............................................................
V.
Wash motor power rating ..................................
W.
Spin motor power rating ....................................
W.
Electropump power rating .................................
W.
Heating element power rating ...........................
W.
Max. power input ...............................................
W.
Fuse ..................................................................
A.
Water pressure ..............................................
MPa
Spin speed ........................................
r.p.m./min
Water consumption (60º C programme)............
lit.
Energy consumption (60º C programme) .....
kWh
Energy efficiency rating ..........................................
4,5
230
125
340
30
1.850
2.200
10
0,05 min.
0,8 max.
1200
59
0,85
A
LTO 126 A
4,5
230
175
300
30
1.850
2.200
10
0,05 min.
0,8 max.
800
69
1,03
B
4,5
230
175
400
30
1.850
2.200
10
0,05 min.
0,8 max.
1000
59
0,85
A
LTO 86 B LTO 106 A
OPENING THE DRUM
1.
Lift the lid (A) and open completely. Next open the drum
door following these instructions:
2.
Press catch (B) and kept it pressed down.
Press the first shutter (C) to unlock the two shutters (C)
and (D).
3.
Open the second shutter (D). Open the first shutter (C).
Place the washing in the drum.
4.
Close the first shutter (C).
Close the second shutter (D) so that the catch on the first
shutter fits correctly into the slot. Release.
5.
Ensure that both shutters are perfectly aligned and properly
closed.
IMPORTANT: IT IS IMPORTANT TO MAKE SURE THAT
THE DRUM IS CAREFULLY CLOSED BEFORE
OPERATING THE MACHINE, OTHERWISE THE MACHINE
OR LAUNDRY COULD GET DAMAGED.
2 min.
IMPORTANT: A SPECIAL
SAFETY DEVICE PREVENTS
THE LID FROM BEING
OPENED IMMEDIATELY
AFTER THE WASH HAS
FINISHED. ONCE THE SPIN
CYCLE HAS FINISHED, WAIT
FOR 2 MINUTES BEFORE
TRYING TO OPEN THE LID.
FRONT OF THE
WASHING
MACHINE
D
C
FRONT OF THE
WASHING
MACHINE
D
C
FRONT OF THE
WASHING
MACHINE
C
B
D
WASHING
MACHINE LID
A
FRONT OF THE
WASHING
MACHINE
C
D
I
II
MAX.
MAX.
MAX.
40 41
DETERGENT DISPENSER
The detergent dispenser is divided into 4 compartments:
Compartment I, is for prewash powder detergent. The recommended quantity is 60
gm of detergent (for 4,5 kg of laundry).
Compartment II, is for wash powder detergent. The recommended quantity is 120
gm of detergent (for 4,5 kg of laundry).
• The compartment is for bleach. The recommended quantity is 70 c.c.
• The compartment is for fabric conditioners, scenting agents and special
additives. The recommended quantity is 50 c.c.
The detergent compartment has two guidance lines:
• RECOMMENDED (lower line). This indicates the recommended level for the prewash
and wash compartments.
• MAX. This indicates the maximum level which should never be exceeded.
MAXIMUM
(wash)
MAXIMUM
(bleach and scenting agent)
MAXIMUM
(prewash)
RECOMMENDED
VARIABLE CAPACITY
This washing machine automatically adapts the water level to the type and quantity of clothes
to be washed. So it is possible to obtain a «customised» wash, even in terms of energy. This
system reduces water and energy consumption and provides an appreciable reduction in
wash time.
PROGRAMME SELECTION
WHEN SELECTING A PROGRAMME, ENSURE THAT THE START/STOP BUTTON IS NOT
ACTIVATED.
To select a programme:
• Programmes are selected by means of the corresponding control knob (A). See the
table of programmes.
• Select the wash temperature by means of the corresponding control knob.
• Select the spin speed by means of the corresponding control knob.
• Select the different options available by pressing the corresponding buttons.
SAFETY AQUABLOCK
(Mod. LTO 126 A)
This appliance is fitted with a safety system (aquablock), which ensures
maximum freedom from anxiety for users. A water leak detector sensor
located along the inlet pipe and the devoce fitted to the tap, automatically
block the flow of water in the case of accidental leaks. Even without
electricity supply.
USE OF THE SELECTION CONTROLS
A
. PROGRAMME SELECTOR KNOB
To select the desired wash programme, turn this control until
the line (L) coincides with the programme number or symbol.
ALWAYS ROTATE the control in a clockwise direction, never
in an anticlockwise direction. Do not press the “on” button
(H) before selecting the programme
.
If you wish to modify the position of the control or select
another programme once a cycle has commenced, press
the Start/Stop key. Press again to recommence once the
modification has been completed.
f
. PROGRAMME STAGE DISPLAY
This displays the current programme stage throughout the programme selected.
WASH: STOP WITH WATER IN DRUM:
RINSE: END OF PROGRAMME:
FINAL SPIN:
t
. TIME REMAINING DISPLAY
This displays the Approx. time remaining in minutes to the end of the
programme.
B
. TEMPERATURE SELECTOR KNOB
To select the desired wash temperature, turn this control until
the line (L) coincides with the desired temperature.
If you wish to carry out a cold wash, turn the knob until the
cold symbol coincides with the selector mark.
THE KNOB CAN BE TURNED IN BOTH DIRECTIONS.
Do not exceed the maximum temperature recommended for
each cycle in the table of programmes.
42 43
CONTROL DESCRIPTION
PROGRAMME SELECTOR KNOB ............................................
- PROGRAMME STAGE DISPLAY .................................
- TIME REMAINING DISPLAY ........................................
TEMPERATURE SELECTOR KNOB .........................................
SPIN SPEED SELECTOR KNOB ...............................................
DELICATE WASH BUTTON .......................................................
FLOT BUTTON (ANTICREASING) ............................................
ON/OFF PILOT LIGHT ...............................................................
ON/OFF BUTTON ......................................................................
SELECTOR MARK .....................................................................
A
f
t
B
C
D
E
G
H
L
LTO 86 B LTO 86 B
USE OF THE SELECTION CONTROLS
C
. SPIN SPEED SELECTOR KNOB
To select the final spin speed, turn this control until the line
(L) coincides with the desired rpm.
This knob selects the final spin speed. To select a speed,
press down and turn until the desired speed coincides with
the line mark.
The final spin cycle reaches the maximum speed selected in
non-delicate programmes. The middle and final spin cycles
for mixed, synthetics and delicate programmes is carried out
at 400 r.p.m.
If you do not want a spin cycle, coincide the spin exclusion
symbol with the selector mark.
THE KNOB CAN BE TURNED IN BOTH DIRECTIONS.
D
. DELICATE WASH BUTTON
Pressing this button varies the number of turns of the drum in the pre-wash,
wash and rinse phases (programmes 9-10). This allows an extra-delicate wash,
especially suitable for wool and very delicate fabrics. Also indicated for mixed
fabrics, clothes only lightly soiled, and non-iron garments.
E
. FLOT BUTTON (Anticreasing)
When the button is pressed, the machine stops in the last rinse of these
programmes, leaving the wash soaking with a high water level.
To complete these programmes, spin the wash by pressing the button again to
release it.
G
. ON/OFF PILOT LIGHT
H
. ON/OFF BUTTON
CONTROL DESCRIPTION
PROGRAMME SELECTOR KNOB ............................................
- PROGRAMME STAGE DISPLAY .................................
- TIME REMAINING DISPLAY ........................................
TEMPERATURE SELECTOR KNOB .........................................
SPIN SPEED SELECTOR KNOB ...............................................
SUPER RINSE BUTTON ............................................................
DELICATE WASH BUTTON .......................................................
FLOT BUTTON (ANTICREASING).............................................
ON/OFF PILOT LIGHT ...............................................................
ON/OFF BUTTON ......................................................................
SELECTOR MARK .....................................................................
A
f
t
B
C
D
E
F
G
H
L
44 45
LTO 106 A
LTO 126 A
LTO 86 B
USE OF THE SELECTION CONTROLS
A
. PROGRAMME SELECTOR KNOB
To select the desired wash programme, turn this control until
the line (L) coincides with the programme number or symbol.
ALWAYS ROTATE the control in a clockwise direction, never
in an anticlockwise direction. Do not press the “on” button
(H) before selecting the programme
.
If you wish to modify the position of the control or select
another programme once a cycle has commenced, press
the Start/Stop key. Press again to recommence once the
modification has been completed.
f
. PROGRAMME STAGE DISPLAY
This displays the current programme stage throughout the programme selected.
WASH: STOP WITH WATER IN DRUM:
RINSE: END OF PROGRAMME:
FINAL SPIN:
t
. TIME REMAINING DISPLAY
This displays the Approx. time remaining in minutes to the end of the
programme.
B
. TEMPERATURE SELECTOR KNOB
To select the desired wash temperature, turn this control until
the line (L) coincides with the desired temperature.
If you wish to carry out a cold wash, turn the knob until the
cold symbol coincides with the selector mark.
THE KNOB CAN BE TURNED IN BOTH DIRECTIONS.
Do not exceed the maximum temperature recommended for
each cycle in the table of programmes.
USE OF THE SELECTION CONTROLS
C
. SPIN SPEED SELECTOR KNOB
To select the final spin speed, turn this control until the line
(L) coincides with the desired rpm.
This knob selects the final spin speed. To select a speed,
press down and turn until the desired speed coincides with
the selector mark.
The final spin cycle reaches the maximum speed selected in
non-delicate programmes. The middle and final spin cycles
for mixed, synthetics and delicate programmes is carried out
at 400 r.p.m.
If you do not want a spin cycle, coincide the spin exclusion
symbol with the selector mark.
THE KNOB CAN BE TURNED IN BOTH DIRECTIONS.
D
. SUPER-RINSE BUTTON
Pressing this button removes the last vestiges of soap powder from the
fabrics, as the rinses are done with more water. Programmes 1-2-3-4.
E
. DELICATE WASH BUTTON
Pressing this button varies the number of turns of the drum in the pre-wash,
wash and rinse phases (programmes 9-10). This allows an extra-delicate wash,
especially suitable for wool and very delicate fabrics. Also indicated for mixed
fabrics, clothes only lightly soiled, and non-iron garments.
F
. FLOT BUTTON (Anticreasing)
The Flot button only works in programmes (5-6-7-8-9-10) for mixed, synthetic
and very delicate fabrics.
When the button is pressed, the machine stops in the last rinse of these
programmes, leaving the wash soaking with a high water level.
To complete these programmes, spin the wash by pressing the button again to
release it.
G
. ON/OFF PILOT LIGHT
H
. ON/OFF BUTTON
46
47
LTO 106 A
LTO 126 A
LTO 106 A
LTO 126 A
48
49
DELICATE SYNTHETICS
Curtains, skirts, blouses, shirts
WOOL
(“Machine washable”)
DELICATE RINSE
GENTLE SPIN
FAST BLENDS
Shirts, sheets, baby clothes, whites
FAST SYNTHETICS
Shirts, blouses, fast coloured skirts
MIXED SYNTHETIC
Lightly soiled clothes of all types
FAST WASH PROGRAMME
DELICATE RINSE
GENTLE SPIN
EMPTYING
Emptying only
PRE-WASH, Wash, 3 rinses, final gentle spin.
Wash, 3 rinses, final gentle spin
Wash, 3 rinses, final gentle spin
FAST WASH PROGRAMME. Short wash, 3 rinses,
final gentle spin
3 rinses. Final gentle spin
Rinse. Final gentle spin
Emptying (e.g. after stopping with water in drum)
TABLE OF PROGRAMMES
I
II
Programme
*
, as per EN standard 60456.
1
2
*
3
4
Cotton, linen
Cotton, fast blends
Cotton, blends
Cotton
Cotton, linen
WHITE (PRE-WASH)
Sheets, white & fast coloured tablecloths, serviettes,
lingerie
SOILED WHITE
Sheets, white & fast coloured tablecloths, serviettes,
lingerie
FAST COLOURS
Medium soiled coloured clothes
FAST WASH PROGRAMME
Non fast colours, jeans
BLEACH/ WHITENING
Organic stains
VIGOROUS RINSE
VIGOROUS SPIN
NORMAL FABRICS
4,5
4,5
3,5
3,5
From cold
to…
90º
From cold
to…
90º
From cold
to…
60º
From cold
to…
40º
2
2
2
2
SYNTHETIC FABRICS
5
6
*
7
8
Z
Fast blends
Synthetics
(Rayon, acrylics)
Delicate
synthetics
Blends, synthetics,
delicate items
Clothes requiring
no spin
From cold
to…
60º
From cold
to…
60º
From cold
to…
50º
From cold
to…
40º
Synthetics
(Rayon, acrylics)
Wool
Blends,
Synthetics,
Delicate items
9
10
*
1,5
1
From cold
to…
40º
From cold
to…
40º
1
2
3
4
PRE-WASH, Main wash, 4 rinses, final vigorous spin.
Main wash, 4 rinses, final vigorous spin
Short wash, 4 rinses, final vigorous spin
FAST WASH PROGRAMME. Short wash, 4 rinses,
final vigorous spin
Bleach in pre-wash
4 rinses. Final vigorous spin
Vigorous spin
5
6
7
8
Z
PRE-WASH. Short wash with abundant water, 3
rinses, gentle spin.
Short wash with abundant water, 3 rinses, gentle spin
3 rinses, gentle spin
Gentle spin
9
10
152´
128´
90´
74´
47´
42´
97´
76´
68´
60´
31´
14´
42´
31´
21´
NOTES:
1. For highly soiled clothes, it is advisable to
reduce the load to no more than 3 kg.
2. Programmes 1-5-9 have pre-wash.
3. For automatic whitening in programmes 1
and 2, pour bleach into the bleach
drawer .
4. The washing machine is designed to
incorporate fabric softener automatically in
the last rinse of each washing cycle.
5. Programme duration is given AS A
GUIDELINE ONLY. This time may vary either
way depending on the temperature selected,
the amount and type of clothes and the
installation conditions (water temperature,
ambient temperature, mains water pressure,
etc.)
MOD. LTO 86 B
PROG.
SEL.
MAX.
LOAD
IN kg.
TYPE OF FABRIC
PROGRAMME FOR
WASHING POWDER
LOAD
MAX.
TEMP.
SEL.
ºC
HIGHLY DELICATE
FABRICS
PROG.
SEL.
PROGRAMME STEPS
As a
guideline
Prog.
Time in
min.
The first program in each group is the longest and thus ensures the most effective wash at a given
temperature. The other programs should be selected for clothes which are only lightly soiled or are
particularly delicate.
The first program in each group is the longest and thus ensures the most effective wash at a given
temperature. The other programs should be selected for clothes which are only lightly soiled or are
particularly delicate.
WOOL
(“Machine washable”)
DELICATE SYNTHETICS
Curtains, skirts, blouses, shirts
DELICATE RINSE
GENTLE SPIN
HEAVILY SOILED CLOTHES
Shirts, sheets, baby clothes, whites
NORMALLY SOILED CLOTHES
Shirts, blouses, fast coloured skirts
DELICATE COLOURS
Lightly soiled clothes of all types
LIGHTLY SOILED CLOTHES
DELICATE RINSE
GENTLE SPIN
EMPTYING
Emptying only
50 51
Wash, 3 rinses, final gentle spin.
Wash, 3 rinses, final gentle spin
Wash, 3 rinses, final gentle spin
Short wash, 3 rinses, final gentle spin
3 rinses. Final gentle spin
Rinse. Final gentle spin
Emptying (e.g. after stopping with water in drum)
PROG.
SEL.
TABLE OF PROGRAMMES
PROG.
SEL.
I
II
MAX.
LOAD
IN kg.
TYPE OF FABRIC
PROGRAMME FOR
WASHING POWDER
LOAD
Programme
*
, as per EN standard 60456.
FAST WASH PROGRAMME
Super-fast 34 minute cycle
2
From cold
to…
50º
1
*
2
3
4
Cotton, linen
Cotton, fast blends
Cotton, blends
Cotton
Cotton, linen
HEAVILY SOILED CLOTHES
Sheets, white & fast coloured tablecloths, serviettes,
lingerie
NORMALLY SOILED CLOTHES
Sheets, white & fast coloured tablecloths, serviettes,
lingerie
FAST COLOURS
Medium soiled coloured clothes
DELICATE COLOURS
Non fast colours, jeans
BLEACH/ WHITENING
Organic stains
VIGOROUS RINSE
VIGOROUS SPIN
NORMAL FABRICS
4,5
4,5
3,5
3,5
From cold
to…
90º
From cold
to…
60º
From cold
to…
50º
From cold
to…
40º
2
2
2
2
SYNTHETIC FABRICS
5
*
6
7
8
Z
Fast blends
Synthetics
(Rayon, acrylics)
Delicate
synthetics
Blends, synthetics,
delicate items
Clothes requiring
no spin
From cold
to…
60º
From cold
to…
50º
From cold
to…
40º
From cold
to…
30º
Wool
Synthetics
(Rayon, acrylics)
Blends,
Synthetics,
Delicate items
9
*
10
1
1,5
HIGHLY DELICATE
FABRICS
MAX.
TEMP.
SEL.
ºC
PROGRAMME STEPS
Short wash, rinse, gentle spin
1
*
2
3
4
Main wash, 3 rinses, final vigorous spin.
Main wash, 3 rinses, final vigorous spin
Short wash, 3 rinses, final vigorous spin
Short wash, 3 rinses with, final vigorous spin
Bleach in pre-wash
3 rinses. Final vigorous spin
Vigorous spin
5
*
6
7
8
Z
Short wash with abundant water, 3 rinses, gentle
spin.
Short wash with abundant water, 3 rinses, gentle spin
3 rinses, gentle spin
Gentle spin
9
*
10
34´
118´
87´
73´
70´
40´
32´
13´
77´
68´
62´
55´
28´
11´
61´
53´
25´
10´
As a
guideline
Prog.
Time in
min.
MOD. LTO 106 A - 126 A
From cold
to…
40º
From cold
to…
30º
NOTES:
1. For highly soiled clothes, it is advisable to
reduce the load to no more than 3 kg.
2. For automatic whitening in programmes 1
and 2, pour bleach into the bleach
drawer .
3. The washing machine is designed to
incorporate fabric softener automatically in
the last rinse of each washing cycle.
4. Programme duration is given AS A
GUIDELINE ONLY. This time may vary either
way depending on the temperature selected,
the amount and type of clothes and the
installation conditions (water temperature,
ambient temperature, mains water pressure,
etc.)
34-MINUTE FAST PROGRAMME
This programme completes a full wash
cycle in 34 minutes for up to 2 kg of
clothes at 50ºC. Wash temperature can
be lowered via the temperature selector.
Pour washing powder into the pre-wash
compartment (compartment 1)
This programme can also be used as a
pre-wash for especially heavily soiled
washes, prior to selecting the desired
main programme.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Otsein LB LYO86BSY User manual

Category
Washing machines
Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI