Iberna LB ITL413 T User manual

Category
Washing machines
Type
User manual
27 28
INTRODUCTION
Read this manual carefully as it offers practical advice to help you get the most from your
washing machine.
This Instruction Manual contains
everything you need to know about
the everyday running of your
machine. Keep it for future
reference.
An Installation and Maintenance
Manual is also provided which you
should consult during the
installation and routine
maintenance of your washing
machine. The manual also contains
information about possible working
problems, advice about the wash
load, an explanation of label
symbols and hints about how to
remove stubborn stains.
1.- CONTROL PANEL
2.- LID
3.- DRUM
4.- DETERGENT COMPARTMENT
5.- FILTER
INDEX
GUARANTEE .............................................................................
29
TECHNICAL DATA .......................................................................
30
OPENING THE LID – LOADING ................................................
31
DETERGENT DISPENSER ........................................................
32
VARIABLE CAPACITY .................................................................
33
PROGRAMME SELECTION .......................................................
33
CONTROL DESCRIPTION .........................................................
34
TABLE OF PROGRAMMES .......................................................
36
page
EN
When contacting a IBERNA or one of its Technical Assistance
Centre always refer to the model (see control panel) and the
registration and series numbers which are indicated at the bottom of
the machine under the lower panel or on the warranty certificate. That
is to say, everything that appears in the box.
Providing this information will ensure a faster and more efficient service.
SERVICE
29 30
5
230
360
560
30
1.850
2.300
10
0,05 min.
0,8 max.
400
75
1,35
C
TECHNICAL DATA
Load capacity ...........................................................................
kg.
Voltage .......................................................................................
V.
Wash motor power rating ..........................................................
W.
Spin motor power rating ............................................................
W.
Electropump power rating .........................................................
W.
Heating element power rating ...................................................
W.
Max. power input ......................................................................
W.
Fuse ..........................................................................................
A.
Water pressure .....................................................................
MPa
Spin speed ................................................................
r.p.m./min
Water consumption (60º C programme) ...................................
lit.
Energy consumption (60º C programme) .............................
kWh
Energy efficiency rating .................................................................
ITL 413T
GUARANTEE
1.
The appliance comes with a guarantee certificate.
2.
Complete part A and keep it in a safe place. It should
be presented to the Technical Assistance Centre in
the event of a repair being necessary along with the
legal receipt issued by the dealer on purchase.
3.
Do not forget to send part B of the Guarantee
Certificate to be validated within 15 days of purchase.
OPENING THE DRUM
1.
Lift the lid (A) and open completely. Next open the drum
door following these instructions:
2.
Press catch (B) and kept it pressed down.
Press the first shutter (C) to unlock the two shutters (C)
and (D).
3.
Open the second shutter (D). Open the first shutter (C).
Place the washing in the drum.
4.
Close the first shutter (C).
Close the second shutter (D) so that the catch on the first
shutter fits correctly into the slot. Release.
5.
Ensure that both shutters are perfectly aligned and properly
closed.
IMPORTANT: IT IS IMPORTANT TO MAKE SURE THAT
THE DRUM IS CAREFULLY CLOSED BEFORE
OPERATING THE MACHINE, OTHERWISE THE MACHINE
OR LAUNDRY COULD GET DAMAGED.
DETERGENT DISPENSER
The detergent dispenser is divided into 4 compartments:
Compartment I, is for prewash liquid or powder detergent.
The recommended quantity is 60 gm of detergent (for 5 kg
of laundry).
Compartment II, is for wash powder detergent. The
recommended quantity is 120 gm of detergent (for 5 kg of
laundry).
• The compartment is for bleach. The recommended
quantity is 70 c.c.
• The compartment is for fabric conditioners, scenting
agents and special additives. The recommended quantity is
50 c.c.
CAUTION: REMEMBER THAT SOME
DETERGENTS DO NOT GET TAKEN AWAY
EASILY BY THE WATER. IN THIS CASE, IT IS
BEST TO PUT A «WASH BALL» STRAIGHT IN
THE DRUM.
31 32
2 min.
A
FRONT OF THE
WASHING MACHINE
C
B
D
D
C
D
C
FRONT OF THE
WASHING MACHINE
C
D
IMPORTANT: A SPECIAL
SAFETY DEVICE PREVENTS
THE LID FROM BEING
OPENED IMMEDIATELY
AFTER THE WASH HAS
FINISHED. ONCE THE SPIN
CYCLE HAS FINISHED, WAIT
FOR 2 MINUTES BEFORE
TRYING TO OPEN THE LID.
WASHING
MACHINE LID
FRONT OF THE
WASHING MACHINE
FRONT OF THE
WASHING MACHINE
CONTROL DESCRIPTION
Programme selector knob ...........................................................
Temperature selector knob .........................................................
Spin exclusion button ..................................................................
1/2 load button ............................................................................
ON/OFF pilot light .......................................................................
ON/OFF button ...........................................................................
A
B
D
E
G
H
33 34
MOD. ITL 413 T
PROGRAMME SELECTION
WHEN SELECTING A PROGRAMME, ENSURE THAT THE START/STOP BUTTON IS NOT
ACTIVATED.
To select a programme:
• Programmes are selected by means of the corresponding control knob (A). See the
table of programmes.
• Select the wash temperature by means of the corresponding control knob.
• Select the different options available by pressing the corresponding buttons.
VARIABLE CAPACITY
This washing machine automatically adapts the water level to the type and quantity of clothes
to be washed. So it is possible to obtain a «customised» wash, even in terms of energy. This
system reduces water and energy consumption and provides an appreciable reduction in
wash time.
Curtains, skirts, blouses, shirts
WOOL
“machine washable”
Delicate rinse
Conditioner, fragrance, softener
Delicate spin
VERY DIRTY
Shirts, sheets, baby clothes, whites
NORMAL DIRTY
Non-delicate shirts, blouses, coloured skirts
Delicate Colours
LIGHTLY SOILED
Delicate rinse
Conditioner, fragrance, softener
Delicate spin
WATER DISCHARGE
35
36
TABLE OF PROGRAMMES
Cotton, linen
Cotton, mixed and
non-delicates
Cotton, mixed
Cotton
Cotton, linen
VERY DIRTY
Sheets, solid-block coloured and white tablecloths,
napkins, underwear
NORMAL DIRTY
Sheets, solid-block coloured and white tablecloths,
napkins, underwear
Cotton resistant
Lightly soiled - Delicates colours
Bleaching
Organic stains
Energetic rinse
Conditioner, fragrance, softener
Energetic spin
I
II
NON-DELICATES
MIXED SYNTHETICS
Synthetics (Rayon,
Acrylics)
Woollens
Mixed,
synthetics,
woollen delicates
EXTREM. DELIC. FABRICS
Mixed non-
delicates
Synthetics (Rayon,
Acrylics)
Delicate synthetics
Mixed, synthetics,
delicates
Clothes which do
need to be spun
Programme
*
, according to EN 60456 Regulations.
The first program in each group is the longest and thus ensures the most effective wash at a given
temperature. The other programs should be selected for clothes which are only lightly soiled or are
particularly delicate.
SEL.
PROG.
MAX.
LOAD
IN KG
TYPE OF
FABRIC
PROGRAMME
DETERGENT
SEL.
TEMP.
MOD. ITL 413 T
USE OF THE SELECTION CONTROLS
A
. PROGRAMME SELECTOR KNOB
This control allows you to select the washing programmes.
ALWAYS ROTATE the control in a clockwise direction, never
in an anticlockwise direction. Do not press the “on” button
(H) before selecting the programme
.
If you wish to modify the position of the control or select
another programme once a cycle has commenced, press
the ON/OFF button. Press again to recommence once the
modification has been completed.
B
.TEMPERATURE SELECTOR KNOB
This control allows you to select the temperature of your wash.
If you wish to carry out a cold wash, turn the knob until the
cold symbol coincides with the selector mark.
THE KNOB CAN BE TURNED IN BOTH DIRECTIONS.
Do not exceed the maximum temperature recommended for
each cycle in the table of programmes.
D
. SPIN EXCLUSION BUTTON
This button excludes the spin cycle from the wash programme. This option is
recommended for special fabrics.
E
. 1/2 LOAD BUTTON
The water load for a small wash may be reduced by pressing the load
button. This saves water, detergent and electricity. The amount of detergent
used should be reduced in proportion to the load.
IMPORTANT: NEVER PRESS THE HALF LOAD BUTTON WHEN
WASHING PURE NEW WOOL AND VERY DELICATE FABRICS.
G
. ON/OFF PILOT LIGHT
H
. ON/OFF BUTTON
MOD. ITL 413 T
5
5
3,5
3,5
2
2
2
2
9
10
*
1
1,5
5
6
*
7
8
Z
1
2
*
3
4
From cold
to
…90º
From cold
to
…90º
From cold
to
…60º
From cold
to
…40º
From cold
to
…60º
From cold
to
…60º
From cold
to
…50º
From cold
to
…40º
From cold
to
…40º
From cold
to
…40º
NOTE:
1. If the wash load is very dirty it is best to reduce the load weight to 3 kg.
2. In programmes 5-6-7-8-9-10, the washing machine stops with water in the drum at the
end of the rinse cycle to prevent creasing.
The cycle may be ended in two ways: - Move the programme selector forward one step.
- Select programme Z (water discharge). In this case, disconnect the ON/OFF button before
making the selection on the control.
3. Programmes 1and 2 have an automatic bleaching option. Simply place the bleaching
agent in the compartment.
4. The washing machine is designed to incorporate fabric softener automatically in the last
rinse of each washing cycle.
5. Programmes 1-5-9 are with prewash.
37
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6

Iberna LB ITL413 T User manual

Category
Washing machines
Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI