2. Skov
  3. Roof Cap

Skov Roof Cap Mounting Guide

  • Hello! I have analyzed the provided document, which includes instructions for mounting DA 600 and DA 820 roof caps, detailing drilling and hardware specifications. I understand the assembly process and am ready to answer your questions about it.
  • What size drill holes are required?
    How many holders need to be mounted on the roof cap?
    What type of screws are used to mount holders on the roof duct?
2022.03.15 • 603858
DA 600 Roof Cap on DA 600 Roof Duct
DA 820 Roof Cap on DA 820 Roof Duct
Drill 2x8 ø7 mm holes at the center marks
Mount 8 x holders on the roof cap
with hex screw, washer and lock nut
Mount 8 x holders on the roof duct with
chipborad screws
SKOV A/S • Hedelund 4 • Glyngøre • DK-7870 Roslev
Tel. +45 72 17 55 55 • Fax +45 72 17 59 59 • www.skov.com • E-mail: [email protected]
DA 600 Roof Cap on DA 600 Cone
Drill 2x8 ø7 mm holes at the center marks
Mount 8 x holders on the roof cap
with hex screw, washer and lock nut
Mount 8 x holders on the cone with
chipborad screws
/