2. ITC
  3. 69600 Series
69600 Series

ITC 69600 Series User manual

  • Hello! I've reviewed the installation instructions for the ITC courtesy lights, including models 69610, 69620, 69650, 69660, and 69670. This document covers important safety instructions, step-by-step installation, wiring diagrams and information about the lights and their features like different wiring options and color cycling. I'm ready to answer your questions about how to install or use your new lighting.
  • What size hole is needed for installation?
    What type of switch is needed for the two-wire version?
    What type of switch is needed for the three-wire version?
    What happens if the light is off for more than 30 seconds?
3030 Corporate Grove Dr.
Hudsonville, MI 49426
Phone: 616.396.1355
itc-us.com
1. Determine the installation location for your light.
Once determined drill a 2” hole using a hole saw.
2. Wire the light following the wiring diagrams be
low.
If using a two wire version a standard switch can
be used. The light should be turned off and on to
cycle through the colors.
If the light is off for more than 30 seconds it will
restart the cycle.
If using a three wire version, a three position
switch will be required.
3. Feed wires back through the hole and screw the
light in place using the screws provided. Attach
the bezel by lining up the cutouts and rotating
until in snaps in place.
PARTS/TOOLS NEEDED:
Courtesy Light Decorative Bezel Mounting Screws 2” Hole Saw Bit
(not provided)
Butt Splice Connectors
(not provided) Power Drill
IMPORTANT SAFETY INSTRUCTIONS. READ CAREFULLY FOR YOUR PROTECTION AND SAVE ALL IN-
STRUCTIONS.
*Disconnect power before installing, adding or changing any component.
*To avoid a hazard to children, account for all parts and destroy all packing materials.
+12V Red (+)
Black (-)
+12V Red (+)
Black (-)
White (+)
+12V
69660
69610, 69620, 69650 & 69670
INSTALLATION INSTRUCTIONS
Courtesy Light
Part#: 69610, 69620, 69650, 69660 & 69670
For warranty information please visit www.itc-us.com/warranty-return-policy
Rev C • 09/24/20
Page 1 of 1
/