2. ITC
  3. 69320
69320

ITC 69320 User manual

  • Hello! I've reviewed the installation instructions for the ITC Round Courtesy Light, part number 69320. This document provides detailed steps for mounting and wiring the light, including safety precautions and different wiring configurations. I'm ready to answer any questions you might have about installing this product.
  • What is the operating voltage of this light?
    What size hole is needed for installation?
    What is the first step in the installation process?
3030 Corporate Grove Dr.
Hudsonville, MI 49426
Phone: 616.396.1355
itc-us.com
1. Determine installation location and cut a hole with 1”
hole saw or spade drill bit
2. Twist bezel counter-clockwise to remove
3. Attach wires to power source
4. Push light into hole and attach with provided screws.
5. Replace bezel by pushing on and twisting clockwise
until secure.
Red (+)
Black (-)
Courtesy
Light
Red (+)
Black (-)
Incoming
12V DC
Power
Safety Instructions
• Disconnect power before installing, adding or changing any component.
• To avoid a hazard to children, account for all parts and destroy all packing materials.
• Operating Voltage: 10 - 14V DC
6. Use the wiring diagrams below to wire the
light to the units power. Test the light
PARTS NEEDED:
Courtesy Light Mounting Screws Power Drill & 1” Spade Bit
(not provided)
Wire Nuts
(not provided)
RGBW Wiring
Note: The RGB light will
not have a white wire
Red (-)
Black (+)
Courtesy
Light
Green (-)
Blue (-)
Incoming
12V DC
Power
RGBW
Controller
Red (+)Black (-)
White (-)
sold separately
Single Color Wiring
Mounting Surface
Power Source
INSTALLATION INSTRUCTIONS
Round Courtesy Light
Part#: 69320
For warranty information please visit www.itc-us.com/warranty-return-policy
DOC #710-00170 • Rev A • 06/30/20
Page 1 of 1
/