ITC 69360 Installation guide

69360
ITC
Brand
ITC
Model
69360
Type
Installation guide
3030 Corporate Grove Dr.
Hudsonville, MI 49426
Phone: 616.396.1355
itc-us.com
1. Determine where your LED light fixture will be in-
stalled. Once determined, drill a hole for the wires.
Red (+)
Black (-)
Courtesy
Light
Red (+)
Black (-)
Incoming
12V DC
Power
Safety Instructions
• Disconnect power before installing, adding or changing any component.
• To avoid a hazard to children, account for all parts and destroy all packing materials.
• Light is rated for interior installation only, do not install in wet locations.
• Operating Voltage: 10 - 14V DC
• Do not install any luminaire assembly closer than 6” from any curtain or other combustible material.
2. Use the wiring diagram below to wire the light
to the units power. Test the light
3. Mark location of screw holes and pre-drill.
Screw in fixture and snap bezel onto the light.
PARTS NEEDED:
Courtesy Light Mounting Screws Power Drill
(not provided)
Wire Nuts
(not provided)
RGBW Wiring
Red (-)
Black (+)
Courtesy
Light
Green (-)
Blue (-)
Incoming
12V DC
Power
RGBW
Controller
Red (+)Black (-)
White (-)
sold separately
Single Color Wiring
INSTALLATION INSTRUCTIONS
Oblong Courtesy
Light
Part#: 69360
For warranty information please visit www.itc-us.com/warranty-return-policy
Rev B • 04/07/20
Page 1 of 1
  • Page 1 1

ITC 69360 Installation guide

69360
ITC
Brand
ITC
Model
69360
Type
Installation guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents