ITC 21005 User manual

Type
User manual

Below you will find brief information for Dimmer 21005. This document provides installation instructions for a digital dimmer switch, specifically model 21005. It outlines the necessary parts, tools, and safety precautions for installation. The instructions detail how to prepare the switch location, connect the wiring, and secure the dimmer in place, including adding the bezel and knob. The document also includes a wiring diagram for reference.

Below you will find brief information for Dimmer 21005. This document provides installation instructions for a digital dimmer switch, specifically model 21005. It outlines the necessary parts, tools, and safety precautions for installation. The instructions detail how to prepare the switch location, connect the wiring, and secure the dimmer in place, including adding the bezel and knob. The document also includes a wiring diagram for reference.

3030 Corporate Grove Dr.
Hudsonville, MI 49426
Phone: 616.396.1355
itc-us.com
For warranty information please visit www.itc-us.com/warranty-return-policy
DOC #: 710-00097 • Rev B •11/16/2022
1. Determine the installation location for your switch and cut a
1-1/2” x 2” hole using a drywall saw.
PARTS/TOOLS NEEDED:
Dimmer Switch Bezel & Knob
(optional) Mounting Screws Wire Nuts Power Drill
IMPORTANT SAFETY INSTRUCTIONS. READ CAREFULLY FOR YOUR PROTECTION AND SAVE ALL INSTRUCTIONS.
• Disconnect power before installing, adding or changing any component.
• To avoid a hazard to children, account for all parts and destroy all packing materials.
• It is recommended that fuse protection be added to the positive (+) input.
2. Using wire nuts attached the units’ power to the wires
labeled input and attach the output side to your
selected light fixture. (figure 1)
4. To attach the bezel, first remove the black knob. Slide
bezel onto switch and install new knob.
INSTALLATION INSTRUCTIONS
Digital Dimmer
Part#: 21005
Page 1 of 1
3. Feed wires back through the hole and screw the
switch in place using the screws provided.
Figure 1: Wire the switch based on the wiring
diagram below.
Incoming
12V/24V Power
Dimmer
Switch
LED
Light
LED
Light
To System
Ground
White (-)
Red (+)
To System
Ground (-)
White (+)
Red (+)
10 Amp
Fuse Only
Black (-)
  • Page 1 1

ITC 21005 User manual

Type
User manual

Below you will find brief information for Dimmer 21005. This document provides installation instructions for a digital dimmer switch, specifically model 21005. It outlines the necessary parts, tools, and safety precautions for installation. The instructions detail how to prepare the switch location, connect the wiring, and secure the dimmer in place, including adding the bezel and knob. The document also includes a wiring diagram for reference.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI