2. ITC
  3. 69330
69330

ITC 69330 User manual

  • I've reviewed the installation instructions for the ITC courtesy lights, models 69330 and 69331. The document outlines the installation procedure, including the required hole size, the fact that LEDs are polarity sensitive and warnings to avoid hazards. I'm ready to answer any questions you have about the installation process or the lights themselves.
  • What size hole is required for installation?
    Are the LEDs polarity sensitive?
    Can the brushed nickel bezel be used in exterior applications?
3030 Corporate Grove Dr.
Hudsonville, MI 49426
Phone: 616.396.1355
itc-us.com
- Turn bezel counterclockwise to remove
- Drill hole in mounting surface with 2.125” hole saw
- Install using included screws
- Turn bezel clockwise to replace
1.
INSTALLATION CONSIDERATIONS
• To avoid a hazard to children, account for all parts and destroy all packing materials.
• Disconnect power before installing, adding, or changing any component.
• Positive (+) outputs require a fuse if the attached wire leads are not rated to handle the max current.
• The brushed nickel bezel can be used in interior applications only.
• LEDs are polarity sensitive and will not light if not attached properly.
INSTALLATION INSTRUCTIONS
Push Lens Courtesy
Light
Part#: 69330 & 69331
For warranty information please visit www.itc-us.com/warranty-return-policy
Rev A • 07/20/16
Page 1 of 1
PARTS/TOOLS NEEDED:
Courtesy Light Power Drill
(Not Provided)
/