ITC 69683SS-XX User manual

ITC
Brand
ITC
Model
69683SS-XX
Type
User manual
3030 Corporate Grove Dr.
Hudsonville, MI 49426
Phone: 616.396.1355
itc-us.com
Safety Instructions
• Disconnect power before installing, adding or changing any component.
• To avoid a hazard to children, account for all parts and destroy all packing materials.
• Do not install any luminaire assembly closer than 6” from any combustible materials.
• Positive (+) outputs require a fuse if the attached wire leads are not rated to handle the max current.
1. Determine the installation location and mark the location using
the provided template. You can also mark the hole locations
using the light itself.
2. Drill a 3/4” hole to accommodate the wiring. Feed wires
through the hole.
3. Drill two holes for M4 screws sized appropriately for the sub-
strate material used. Snap on the bezel and screw the light in
place using the provided screws.
4. Follow the wiring diagram below to wire the light to your system.
RGB LightSingle Color Light
Underwater
Light
To 12V DC
Power
Black (-)Red (+)Black (-)
RGB
Controller
To 12V DC
Power
Black (-)
Red (R)
Green (G)
Blue (B)
Black (W)
Underwater
Light
3.62”
1.3”
PARTS / TOOLS NEEDED:
Underwater Light RGB Controller (RGB version only) Power Drill w/ Hole Saw Bit Butt Splices (not provided)
INSTALLATION INSTRUCTIONS
Underwater Light
Part#: 69683SS-XX
For warranty information please visit www.itc-us.com/warranty-return-policy
DOC #: 710-00031 • Rev C • 11/29/18
Page 1 of 1
  • Page 1 1

ITC 69683SS-XX User manual

ITC
Brand
ITC
Model
69683SS-XX
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents